Veritas NetBackup ™ Enterprise Server and Server 10.0 - 10.x.x Hardware and Cloud Storage Compatibility List (HCL)
Copyright © 2025 Veritas Technologies LLC. All rights reserved. Veritas, the Veritas Logo, and NetBackup are trademarks or registered trademarks of Veritas Technologies LLC in the U.S. and other countries. Other names may be trademarks of their respective owners.
Created on June 30, 2025
Click here for the HTML version of this document.
Introduction
This Hardware and Cloud Storage Compatibility List (HCL) document contains information about hardware and cloud storage solutions supported with Veritas NetBackup Enterprise Server and Server 10.0 - 10.x.x. The HCL contains separate sections for each solution type. These sections can be accessed by expanding the bookmarks on the left. (For information on other NetBackup versions, see NetBackup Compatibility)
To ensure Veritas' support, tape libraries, tape drives, virtual tape devices, NDMP devices, snapshot solutions, Veritas OpenStorage Cloud solutions and Storage Servers must be present on the HCL and must be supported by the hardware manufacturer or cloud provider and the operating system vendor in the desired environment. (The list of Fibre Channel devices contained in the Infrastructure Used for Testing section represents equipment that has been used during NetBackup qualification testing in other sections of this document and is not intended to be a list of supported devices.)
Note: Our support policy is not the same for all solution types, so please read the notes at the beginning of each section for information on supported solution software and firmware versions.
Qualified hardware and cloud solutions listed in this document are tested through the Veritas Technology Ecosystem (VTE). If you would like to have hardware or cloud solutions considered for inclusion on this HCL, please contact your hardware partner or cloud provider to ensure they are a member of VTE and have submitted a request to have their product qualified with NetBackup. Information on Veritas Technology Ecosystem is available at Veritas PartnerNet
For information about certain NetBackup features, functionality, 3rd-party product integration, Veritas product integration, applications, databases, and OS platforms that Veritas intends to replace with newer and improved functionality, or in some cases, discontinue without replacement, please see the widget titled "NetBackup Future Platform and Feature Plans" at SORT
NOTE: Support for Huawei solutions shown in this HCL is based on testing done prior to May 2019.
Hardware Compatibility List Users - Would you recommend this HCL to a colleague? If yes, please tell us what we are doing well. If no, please tell us how we could improve. Drop us an email at mailto:NetBackup_HCL@veritas.com
Introduction | NetBackup Compatibility Lists | Configuration Files | Cloud Object Store Protection | NetBackup Appliances | Snapshot Solutions | NetBackup for Kubernetes | Cloud Storage Solutions | OST Storage Servers | Virtual Tape Libraries | Tape Libraries | Tape Drives | NDMP Devices | Descriptions of Disk Storage Unit Types | Encryption and Security Solutions | Fibre Transport Media Server HBAs | Infrastructure Used for Testing | Retiring Soon
NetBackup Compatibility Lists
We focus on hardware compatibility on this list, so here's a table with links to compatibility information on Operating Systems, Agents and Options, such as: NDMP, Databases, Desktop/Laptop, etc.
We now provide most NetBackup compatibility documents in an HTML format along with the classic PDF. Add NetBackup Compatibility to your bookmarks for quick links to the documents listed below, compatibility lists for earlier NetBackup versions, and much more.
Veritas NetBackup 10.0 - 10.x.x Compatibility Lists
Compatibility List Name | URL |
---|---|
NetBackup Enterprise Server and Server 10.0 - 10.x.x OS Software Compatibility List (Contains compatibility info for Client, Server, Cluster, NOM, NDMP, BMR, SAN Client) | https://www.veritas.com/bin/support/docRepoServlet?bookId=NB_10_OSSCL&requestType=pdf |
NetBackup 10.0 - 10.x.x Database and Application Agent Compatibility List | https://www.veritas.com/bin/support/docRepoServlet?bookId=NB_10_DBSCL&requestType=pdf |
Support for NetBackup 7.7.x, 8.x, and 9.x in virtual environments | https://www.veritas.com/content/support/en_US/doc/NB_70_80_VE |
NetBackup for NDMP: NAS appliance information | https://www.veritas.com/docs/100016340 |
Entire listing of NetBackup Compatibility Lists | http://www.netbackup.com/compatibility |
Configuration Files
NetBackup uses cloud configuration files to add support for new cloud providers, and uses device mappings files to add new device support and to enable certain cloud and OpenStorage functionality.
Cloud Configuration Files
The latest version of this file is included in NetBackup release updates and is also available for download independently on the Veritas support site. This file is updated whenever new cloud provider support is needed, independent of NetBackup release updates. This file is cumulative, so the most recent version contains all support added in earlier versions. The column "NetBackup version" indicates the NetBackup Primary Server version that the Cloud Configuration package requires for installation.
For more information on configuring Cloud solutions see "About the cloud storage vendors for Veritas NetBackup".
Cloud Configuration File Packages
Cloud Configuration Package version | NetBackup version | URL | Providers added |
---|---|---|---|
2.13.5 | Media Server: 8.1.2 or later | Media Server: "Cloud Configuration Package" | Added support:
-Amazon (S3) – Asia Pacific (Malaysia) -Amazon (S3) – Asia Pacific (Thailand) -AWS Recovery Vault (S3) - Mexico (Central) |
2.13.2 | Media Server: 8.1.2 or later | Media Server: Use the most recent version above. | Added support:
-NEC Cloud Storage (St) (S3) -Google (S3) – Santiago (southamerica-west1) region -Google (S3) – Stockholm (europe-north2) region |
2.13.1 | Media Server: 8.1.2 or later | Media Server: Use the most recent version above. | Added support:
-HPE Alletra Storage MP X10000 (S3) -Nutanix Objects S3 object lock (S3) -Cloud Object store protection (COSP) Nutanix Objects -Amazon (S3) – Mexico (Central) region -Oracle Cloud (OCI) Archive tier (S3) -DigiBoxx Megh3 (S3) |
2.12.11 | Media Server: 8.1.2 or later | Media Server: Use the most recent version above. | Added support:
- Fujitsu CS8000 COSS (S3) - Wasabi (S3) - EU West 3 (London) region |
2.12.10 | Media Server: 8.1.2 or later | Media Server: Use the most recent version above. | Added support:
- OVHcloud Standard Object Storage (S3) |
2.12.9 | Media Server: 8.1.2 or later | Media Server: Use the most recent version above. | Added support:
- Wasabi (S3) - EU South 1 (Milan) region |
2.12.8 | Media Server: 8.1.2 or later | Media Server: Use the most recent version above. | Added support:
- NetApp ONTAP S3 Object Lock |
2.12.7 | Media Server: 8.1.2 or later | Media Server: Use the most recent version above. | Added support:
- Anzen AnzenStore (S3) - PSPACE InfiniStor (S3) |
2.12.6 | Media Server: 8.1.2 or later | Media Server: Use the most recent version above. | Added support:
- Cloud Object Store Protection (COSP) - Dell EMC PowerScale series (S3) - Beijing XSKY Enterprise Object Storage S3 Object lock Added earlier support not included in NetBackup 10.5 release: - Hitachi Content Platform (HCP) S3 Object Lock - Calamu Protect (S3) - Amazon (S3) - Canada West (Calgary) region - NEC Cloud IaaS Object Storage N2 (S3) |
2.12.4 | Media Server: 8.1.2 or later | Media Server: Use the most recent version above. | Added support:
- Hitachi Content Platform (HCP) S3 Object lock |
2.12.3 | Media Server: 8.1.2 or later | Media Server: Use the most recent version above. | Added support:
- NEC Cloud IaaS Object Storage N2 (S3) |
2.12.2 | Media Server: 8.1.2 or later | Media Server: Use the most recent version above. | Added support:
- Amazon (S3) - Canada West (Calgary) region |
2.12.1 | Media Server: 8.1.2 or later | Media Server: Use the most recent version above. | Added support:
- Calamu Protect (S3) |
2.11.8 | Media Server: 8.0 or later | Media Server: Use the most recent version above. | Added support for regions in AWS Recovery Vault:
- Asia Pacific (Hyderabad) - Asia Pacific (Melbourne) - Europe (Spain) - Europe (Zurich) - Israel (Tel Aviv) - Middle East (UAE) |
2.11.6 | Media Server: 8.0 or later | Media Server: Use the most recent version above. | Added support:
- Amazon GovCloud - Glacier Instant Retrieval (IR) |
2.11.5 | Media Server: 8.0 or later | Media Server: Use the most recent version above. | Added support:
- Cold tier - Microsoft Azure and Azure Government |
2.11.4 | Media Server: 8.0 or later | Media Server: Use the most recent version above. | Added support:
- iTernity iCAS (S3) - S3 Object Lock |
2.11.3 | Media Server: 8.0 or later | Media Server: Use the most recent version above. | Added support:
- Impossible Cloud (S3) - S3 Object Lock - Google (S3) - Europe West 10 (Berlin) region - Google (S3) - Middle East Central 2 (Dammam) region |
2.11.2 | Media Server: 8.0 or later | Media Server: Use the most recent version above. | Added support:
- Amazon (S3) - Israel (Tel Aviv) region |
2.11.1 | Media Server: 8.0 or later | Media Server: Use the most recent version above. | Added support:
- Cloud Object Store Protection (COSP) - Quantum ActiveScale Systems (S3) |
2.10.12 | Media Server: 8.0 or later | Media Server: Use the most recent version above. | Added support:
- SandStone MOS (S3) |
2.10.11 | Media Server: 8.0 or later | Media Server: Use the most recent version above. | Added support:
- Cloud Object Store Protection (COSP) - STACKIT Object Storage (S3) |
2.10.10 | Media Server: 8.0 or later | Media Server: Use the most recent version above. | Added support:
- Pure Storage FlashBlade (S3) |
2.10.9 | Media Server: 8.0 or later | Media Server: Use the most recent version above. | Added support:
- NetApp ONTAP S3 - Iron Mountain Iron Cloud SOS (S3) - Impossible Cloud (S3) - Amazon (S3) - Asia Pacific (Melbourne) region - Amazon (S3) - Asia Pacific (Hyderabad) region - Amazon (S3) - EU (Zurich) region - Amazon (S3) - EU (Spain) region - Google (S3) - Europe West 12 (Turin) region - Google (S3) - Middle East Central 1 (Doha) region |
2.10.8 | Media Server: 8.0 or later | Media Server: Use the most recent version above. | Added support:
- VAST Data (S3) |
2.10.7 | Media Server: 8.0 or later | Media Server: Use the most recent version above. | Added earlier support not included in NetBackup 10.2 release:
- Amazon Glacier Instant Retrieval (IR) - Backblaze B2 Cloud Storage (S3) - DataCore Swarm (S3) - iTernity iCAS FS (S3) - Quantum ActiveScale Glacier Storage Class - Spectra Vail (S3) - STACKIT Object Storage (S3) - NEC Cloud IaaS Object Storage N2 (S3) - Amazon (S3) - Asia Pacific (Jakarta) region - Amazon (S3) – ME (UAE) region - Google (S3) - Asia South2 (Delhi) region - Google (S3) - Australia-Southeast2 (Melbourne) region - Google (S3) - EU West8 (Milan) region - Google (S3) - EU West9 (Paris) region - Google (S3) - EU Southwest1 (Madrid) region - Google (S3) - North America Northeast2 (Toronto) region - Google (S3) - US East5 (Columbus) region - Google (S3) - US South1 (Dallas) region - Wasabi (S3) - AP Southeast 1 (Singapore) region - Wasabi (S3) - AP Southeast 2 (Sydney) region - Wasabi (S3) - EU Central 2 (Frankfurt) region - Wasabi (S3) - CA Central 1 (Toronto) region - Wasabi (S3) - EU West 2 (Paris) region |
2.10.6 | Media Server: 8.0 or later | Media Server: Use the most recent version above. | Added support:
- STACKIT Object Storage (S3) - Backblaze B2 Cloud Storage (S3) - NEC Cloud IaaS Object Storage (N2) (S3) |
2.10.5 | Media Server: 8.0 or later | Media Server: Use the most recent version above. | Added support:
- Spectra Logic Vail (S3) - DataCore Swarm (S3) - Google (S3) - Middle East West1 (Tel Aviv) region Added earlier support not included in NetBackup 10.1.1 release: - Amazon Glacier Instant Retrieval (IR) - iTernity iCAS FS (S3) - Amazon (S3) - Asia Pacific (Jakarta) region - Amazon (S3) - Middle East (UAE) region - Google (S3) - Asia South2 (Delhi) region - Google (S3) - Australia-Southeast2 (Melbourne) region - Google (S3) - EU West8 (Milan) region - Google (S3) - EU West9 (Paris) region - Google (S3) - EU Southwest1 (Madrid) region - Google (S3) - US East5 (Columbus) region - Google (S3) - US South1 (Dallas) region - Google (S3) - North America Northeast2 (Toronto) region - Wasabi (S3) - EU West 2 (Paris) region - Wasabi (S3) - AP Southeast 1 (Singapore) region - Wasabi (S3) - AP Southeast 2 (Sydney) region - Wasabi (S3) - EU Central 2 (Frankfurt) region - Wasabi (S3) - CA Central 1 (Toronto) region |
2.10.4 | Media Server: 8.0 or later | Media Server: Use the most recent version above. | Added support:
- Google (S3) - EU West8 (Milan) region |
2.10.3 | Media Server: 8.0 or later | Media Server: Use the most recent version above. | Added support:
- Veritas NetBackup Recovery Vault AWS Glacier Deep Archive |
2.10.2 | Media Server: 8.0 or later | Media Server: Use the most recent version above. | Added support:
- Amazon (S3) - Middle East (UAE) region |
2.10.1 | Media Server: 8.0 or later | Media Server: Use the most recent version above. | Added support:
Added earlier support not included in NetBackup 10.1 release: - Amazon Glacier Instant Retrieval (IR) - iTernity iCAS FS (S3) - Amazon (S3) - Asia Pacific (Jakarta) region - Google (S3) - Asia South2 (Delhi) region - Google (S3) - Australia-Southeast2 (Melbourne) region - Google (S3) - EU West9 (Paris) region - Google (S3) - EU Southwest1 (Madrid) region - Google (S3) - US East5 (Columbus) region - Google (S3) - US South1 (Dallas) region - Google (S3) - North America Northeast2 (Toronto) region - Wasabi (S3) - EU-West-2 (Paris) region - Wasabi (S3) - AP Southeast 1 (Singapore) region - Wasabi (S3) - AP Southeast 2 (Sydney) region - Wasabi (S3) - EU Central 2 (Frankfurt) region - Wasabi (S3) - CA Central 1 (Toronto) region |
2.9.5 | Media Server: 8.0 or later | Media Server: Use the most recent version above. | Added support:
- Cloudian HyperStore - S3 Object Lock |
2.9.4 | Media Server: 8.0 or later | Media Server: Use the most recent version above. | Added support:
- Google (S3) - US East5 (Columbus) region - Google (S3) - US South1 (Dallas) region - iTernity iCAS FS (S3) |
2.9.3 | Media Server: 8.0 or later | Media Server: Use the most recent version above. | Added support:
- Google (S3) - EU Southwest1 (Madrid) region - Google (S3) - EU West9 (Paris) region - Wasabi (S3) - AP Southeast 1 (Singapore) region |
2.9.2 | Media Server: 8.0 or later | Media Server: Use the most recent version above. | Added support:
- Wasabi (S3) - AP Southeast 2 (Sydney) region - Wasabi (S3) - EU Central 2 (Frankfurt) region - Wasabi (S3) - CA Central 1 (Toronto) region |
2.9.1 | Media Server: 8.0 or later | Media Server: Use the most recent version above. | Added support:
Added earlier support not included in NetBackup 10.0 release: - Amazon Glacier Instant Retrieval (IR) - Amazon GovCloud - Glacier Instant Retrieval (IR) - Amazon (S3) - Asia Pacific (Jakarta) region - Google (S3) - Asia South2 (Delhi) region - Google (S3) - Australia-Southeast2 (Melbourne) region - Google (S3) - NorthAmerica Northeast2 (Toronto) region - Quantum Active Archive and ActiveScale Systems - Standard (S3) - Quantum Active Archive and ActiveScale Systems - Glacier (S3) - Wasabi (S3) - EU-West-2 (Paris) region |
Cloud Configuration File Versions released with NetBackup and NetBackup Appliances
NetBackup / NetBackup Appliance version | Cloud Configuration File version |
---|---|
10.5 | 2.12.0 |
10.4 | 2.12.0 |
10.3 | 2.11.0 |
10.2 | 2.10.0 |
10.1.1 | 2.10.0 |
10.1 | 2.10.0 |
10.0 | 2.9.0 |
Device Mappings Files
NetBackup uses device mappings files to add new device support, and to enable certain cloud and OpenStorage functionality. The latest version of these files is included in NetBackup release updates and is also available for download independently on the Veritas support site. This file is updated whenever new device support is needed independent of NetBackup release updates.
Veritas recommends downloading and installing the latest device mappings files package:
- Before configuring a cloud solution with the Cloud Configuration Wizard.
If your cloud solution is listed in the recent additions below, check to see that the version of device mappings you're running is at that level or later.
If you're running an older version, download and install the latest package to permit configuration of the cloud solution.
- Before configuring an OpenStorage storage server for Accelerator or Targeted A.I.R..
If your OST solution is listed in the recent additions below, check to see that the version of device mappings you're running is at that level or later.
If you're running an older version, download and install the latest package to permit configuration of the OST functionality.
- Before discovering and configuring devices with the Device Configuration Wizard.
If your configuration contains a new device listed in the recent additions below, check to see that the version of the device mappings you're running is at that level or later.
If you're running an older version, download and install the latest package to properly configure the device.
The first table below contains links to the current versions of the device mappings file packages, along with a list of support added with current and recent versions.
The second table lists the version of the device mappings file released with NetBackup 10.0 and each subsequent Release Update.
Device Mappings Files Packages
Version | OS platforms / URL | Support added |
---|---|---|
1.183 |
Linux/UNIX: "Device Mappings Package for UNIX / Linux"
Windows: "Device Mappings Package for Windows Servers" |
-NEC Cloud Storage (St) (S3) |
1.182 |
Linux/UNIX: Use the most recent version above.
Windows: Use the most recent version above. |
-HPE Alletra Storage MP X10000 (S3) -DigiBoxx Megh3 (S3) |
1.181 |
Linux/UNIX: Use the most recent version above.
Windows: Use the most recent version above. | - OVHcloud Standard Object Storage (S3)
- Fujitsu CS8000 COSS (S3) |
1.180 |
Linux/UNIX: Use the most recent version above.
Windows: Use the most recent version above. | - Anzen AnzenStore (S3)
- PSPACE InfiniStor (S3) |
1.178 |
Linux/UNIX: Use the most recent version above.
Windows: Use the most recent version above. | - Calamu Protect (S3) |
1.177 |
Linux/UNIX: Use the most recent version above.
Windows: Use the most recent version above. | - IBM iCOS (S3) Legacy endpoints |
1.176 |
Linux/UNIX: Use the most recent version above.
Windows: Use the most recent version above. | - NetApp ONTAP S3
- Iron Mountain Iron Cloud SOS (S3) - Impossible Cloud (S3) - Pure Storage FlashBlade (S3) |
1.174 |
Linux/UNIX: Use the most recent version above.
Windows: Use the most recent version above. | - VAST Data (S3) |
1.173 |
Linux/UNIX: Use the most recent version above.
Windows: Use the most recent version above. | - STACKIT Object Storage (S3)
- Backblaze B2 Cloud Storage (S3) - NEC Cloud IaaS Object Storage (N2) (S3) |
1.172 |
Linux/UNIX: Use the most recent version above.
Windows: Use the most recent version above. | - Spectra Logic Vail (S3)
- DataCore Swarm (S3) - T-AIR for Infinidat OST |
1.171 |
Linux/UNIX: Use the most recent version above.
Windows: Use the most recent version above. | - iTernity iCAS FS (S3) |
1.169 |
Linux/UNIX: Use the most recent version above.
Windows: Use the most recent version above. | - Hewlett Packard Enterprise LTO Ultrium 9 tape drives
- IBM LTO Ultrium 9 tape drives - Quantum LTO Ultrium 9 tape drives - Quantum Active Archive and ActiveScale Systems - Standard (S3) - Quantum Active Archive and ActiveScale Systems - Glacier (S3) |
Device Mappings Versions released with NetBackup and NetBackup Appliances
NetBackup / NetBackup Appliance version | Device Mappings version |
---|---|
10.5 | 1.179 |
10.4 | 1.176 |
10.3 | 1.176 |
10.2 | 1.170 |
10.1.1 | 1.170 |
10.1 | 1.170 |
10.0 | 1.168 |
Cloud Object Store Protection
With NetBackup 10.1 onwards, NetBackup can protect Azure Blob Storage and a wide variety of S3 API-compatible object stores like AWS S3, and Google Cloud Platform’s object store. You can deploy the NetBackup environment in the same cloud network as the object store, or outside of it.
For more information about Cloud Object store protection, refer to the "NetBackup™ Web UI Cloud Object Store Administrator's Guide".
Note: Cloud vendors may levy substantial charges for data egress for moving data out of their network. Check your cloud provider pricing for data-out before configuring a backup policy that transfers data out of one cloud to another cloud region or an on-premises data center.
Cloud Object Store Protection - Considerations
Subject | Notes |
---|---|
Support assumptions |
1. For details on supported operating systems, please refer to the "NetBackup 10.0 - 10.x.x Operating System Software Compatibility List".
2. NetBackup-certified cloud regions support is listed in the vendor tables in the Cloud Storage Solutions section of this HCL. 3. NetBackup-certified cloud object storage support is listed in the vendor tables in the Cloud Storage Solutions section of this HCL. |
Storage tier considerations | NetBackup does not allow configuring all storage tiers to be protected for Cloud Object store because reading data from some of these tiers is very costly. For example, archival tiers from public cloud providers are meant for write once usage and reading data for backup from these tiers incurs a very high cost. If you still need to protect any of these tiers, please contact Veritas support to enable backup of such storage tiers. |
Configuration considerations | NetBackup is configured to trust a number of well-known public Certificate Authorities (CA) related to Cloud storage. However, there are instances where, for internal purposes, you may need to add your own self-signed CA certificate. For information on adding a self-signed CA certificate, please refer to "Cloud Storage Configuration: How To Add a Self-Signed CA Certificate". |
Cloud Object Store Protection - Vendor Compatibility
Cloud Object Store | Supported Storage Tiers | Minimum NetBackup version supported |
---|---|---|
Amazon Simple Storage Service (S3) |
STANDARD
INTELLIGENT_TIERING STANDARD_IA ONEZONE_IA | 10.1 |
Amazon GovCloud |
STANDARD
INTELLIGENT_TIERING STANDARD_IA ONEZONE_IA | 10.1 |
Cloudian HyperStore Object Storage | All storage tiers | 10.1 |
Google Cloud Storage |
STANDARD
NEARLINE COLDLINE | 10.1 |
Microsoft Azure Storage Service |
Hot
Cool | 10.1 |
Hitachi Vantara Content Platform (HCP) - WAN | All storage tiers | 10.1 |
Hitachi Vantara Content Platform (HCP) - LAN | All storage tiers | 10.1 |
Scality RING Storage - WAN | All storage tiers | 10.1 |
Scality RING Storage - LAN | All storage tiers | 10.1 |
StorageGRID Webscale Object Storage | All storage tiers | 10.1.1 |
Red Hat CEPH Storage | All storage tiers | 10.1.1 |
Dell EMC Elastic Cloud Storage [1] | All storage tiers | 10.1 |
| ||
STACKIT Object Storage [2] | All storage tiers | 10.1 |
| ||
Alibaba Cloud Object Storage Service (OSS) | All storage tiers | 10.3 |
NetApp ONTAP S3 | All storage tiers | 10.3 |
Quantum ActiveScale Systems [3] | Standard | 10.3 |
| ||
Microsoft Azure Data Lake Storage Gen2 Service |
Hot
Cool | 10.3 |
IBM Cloud Object Storage | All storage tiers | 10.4 |
Pure Storage FlashBlade | All storage tiers | 10.4 |
DataCore Swarm | All storage tiers | 10.4 |
Dell EMC PowerScale series [4] | All storage tiers | 10.5 |
|
NetBackup Appliances
NetBackup Appliances are Veritas-branded devices offering backup and deduplication solutions for enterprise environments in an appliance form factor. For more information, see the "NetBackup Appliances" page.
NetBackup 5200 Series (Primary/Media Server), 5300 Series (Media Server), Virtual, and Flex Appliances
The following tables list NetBackup 5200 Series, 5300 Series, and Virtual release versions, the Appliance models supported with each version, and the NetBackup Release version on which it is based.
There is also a table listing NetBackup Flex Appliance versions, the Appliance models supported with each version, and the Primary Server and Media Server versions supported with each version.
Documentation for NetBackup Appliances is available here. Late breaking news related to NetBackup Appliances is available here.
NetBackup Appliance packages and hotfixes are available on Downloads Center.
NetBackup 5300 Series - Supported Versions
NetBackup 5300 Series Appliance Release | Supported NetBackup Appliance Models | Based on NetBackup Release |
---|---|---|
5.5.0.1 | 5350, 5340 | 10.5.0.1 |
5.3 | 5350, 5340 | 10.3 |
5.1.1 | 5350, 5340 | 10.1.1 |
5.0 | 5350, 5340, 5330 | 10.0 |
4.1 | 5350, 5340, 5330 | 9.1 |
4.0 | 5350, 5340, 5330 | 9.0 |
3.3.0.1 | 5340, 5330 | 8.3.0.1 |
3.2 | 5340, 5330 | 8.2 |
3.1.2 | 5340, 5330 | 8.1.2 |
3.1.1 | 5340, 5330 | 8.1.1 |
3.1 | 5340, 5330 | 8.1 |
3.0 | 5330 | 8.0 |
NetBackup 5200 Series - Supported Versions
NetBackup 5200 Series Appliance Release | Supported NetBackup Appliance Models | Based on NetBackup Release |
---|---|---|
5.5.0.1 | 5250, 5240 | 10.5.0.1 |
5.3 | 5250, 5240 | 10.3 |
5.1.1 | 5250, 5240 | 10.1.1 |
5.0 | 5250, 5240 | 10.0 |
4.1 | 5250, 5240 | 9.1 |
4.0 | 5250, 5240 | 9.0 |
3.3.0.1 | 5250, 5240 | 8.3.0.1 |
3.2 | 5250, 5240 [1] | 8.2 |
| ||
3.1.2 | 5240 | 8.1.2 |
3.1.1 | 5240 | 8.1.1 |
3.1 | 5240 | 8.1 |
3.0 | 5240 | 8.0 |
NetBackup Virtual Appliance - Supported Versions
NetBackup Virtual Appliance Release | Based on NetBackup Release | Supported Platforms |
---|---|---|
5.1.1 | 10.1.1 | vSphere 7.0 |
5.0 | 10.0 | vSphere 6.7, 7.0, 7U1, 7U2 |
4.1 | 9.1 | vSphere 6.5, 6.7, 7.0, 7U1 |
4.0 | 9.0 | vSphere 6.0, 6.5, 6.7, 7.0 |
3.3.0.1 | 8.3.0.1 | vSphere 6.0, 6.5, 6.7, 7.0 |
3.2 | 8.2 | vSphere 6.0, 6.5, 6.7 |
3.1.2 | 8.1.2 | vSphere 5.5, 6.0, 6.5 |
3.1.1 | 8.1.1 | vSphere 5.5, 6.0, 6.5 |
3.1 | 8.1 | vSphere 5.5, 6.0, 6.5 |
3.0 | 8.0 | vSphere 5.5, 6.0 |
NetBackup Flex Appliance - Supported Versions
NetBackup Flex Appliance Release | Supported NetBackup Appliance Models | Supported NetBackup Primary Server Versions | Supported NetBackup Media Server Versions | WORM (OST Target) |
---|---|---|---|---|
6.0 | 5362 (Configuration A), 5360 (Configuration A, B, C), 5350 (Configuration A, B, C), 5340 (Configuration A, B, C, D, E, F, G, H, J), 5260 (Configuration A, B, C, D), 5250 (Configuration A, B, C, D, E, F), 5150 | 10.5.0.1, 10.5, 10.4.0.1, 10.4, 10.3.0.1, 10.3, 10.2.0.1, 10.2, 10.1.1 | 10.5.0.1, 10.5, 10.4.0.1, 10.4, 10.3.0.1, 10.3, 10.2.0.1, 10.2, 10.1.1 | 20.5.0.1, 20.5, 20.4.0.1, 20.4, 19.0.1, 19.0, 18.0.1, 18.0, 17.1 [1][2][3][4][5][6][7][8][9] |
| ||||
5.0 | 5362 (Configuration A), 5360 (Configuration A, B, C), 5350 (Configuration A, B, C), 5340 (Configuration A, B, C, D, E, F, G, H, J), 5260 (Configuration A, B, C, D), 5250 (Configuration A, B, C, D, E, F), 5150 | 10.5, 10.4.0.1, 10.4, 10.3.0.1, 10.3, 10.2.0.1, 10.2, 10.1.1, 10.1, 10.0.0.1 | 10.5, 10.4.0.1, 10.4, 10.3.0.1, 10.3, 10.2.0.1, 10.2, 10.1.1, 10.1, 10.0.0.1 | 20.5, 20.4.0.1, 20.4, 19.0.1, 19.0, 18.0.1, 18.0, 17.1, 17.0, 16.0.1 [1][2][3][4][5][6][7][8][10][11] |
| ||||
4.0 | 5362 (Configuration A), 5360 (Configuration A, B, C), 5350 (Configuration A, B, C), 5340 (Configuration A, B, C, D, E, F, G, H, J), 5260 (Configuration A, B, C, D), 5250 (Configuration A, B, C, D, E, F), 5150 | 10.4.0.1, 10.4, 10.3.0.1, 10.3, 10.2.0.1, 10.2, 10.1.1, 10.1, 10.0.0.1 | 10.4.0.1, 10.4, 10.3.0.1, 10.3, 10.2.0.1, 10.2, 10.1.1, 10.1, 10.0.0.1 | 20.4.0.1, 20.4, 19.0.1, 19.0, 18.0.1, 18.0, 17.1, 17.0, 16.0.1 [1][2][3][4][5][6][7][10][11] |
| ||||
3.3 | 5360 (Configuration A, B, C), 5350 (Configuration A, B, C), 5340 (Configuration A, B, C, D, E, F, G, H, J), 5260 (Configuration A, B, C, D), 5250 (Configuration A, B, C, D, E, F), 5150 | 10.2.0.1, 10.2, 10.1.1, 10.1, 10.0.0.1, 10.0, 9.1.0.1, 9.1 | 10.2.0.1, 10.2, 10.1.1, 10.1, 10.0.0.1, 10.0, 9.1.0.1, 9.1 | 18.0.1, 18.0, 17.1, 17.0, 16.0.1, 16.0, 15.0.2, 15.0 [1][2][3][10][11][12][13][14] |
| ||||
3.2 | 5360 (Configuration A, B, C), 5350 (Configuration A, B, C), 5340 (Configuration A, B, C, D, E, F, G, H, J), 5260 (Configuration A, B, C, D) , 5250 (Configuration A, B, C, D, E, F), 5150 | 10.2.0.1, 10.2, 10.1.1, 10.1, 10.0.0.1, 10.0, 9.1.0.1, 9.1 | 10.2.0.1, 10.2, 10.1.1, 10.1, 10.0.0.1, 10.0, 9.1.0.1, 9.1 | 18.0.1, 18.0, 17.1, 17.0, 16.0.1, 16.0, 15.0.2, 15.0 [1][2][3][10][11][12][13][14] |
| ||||
3.1 | 5350 (Configuration A, B, C), 5340 (Configuration A, B, C, D, E, F, G, H, J), 5250 (Configuration A, B, C, D, E, F), 5150 | 10.2.0.1, 10.2, 10.1.1, 10.1, 10.0.0.1, 10.0, 9.1.0.1, 9.1 | 10.2.0.1, 10.2, 10.1.1, 10.1, 10.0.0.1, 10.0, 9.1.0.1, 9.1 | 18.0.1, 18.0, 17.1, 17.0, 16.0.1, 16.0, 15.0.2, 15.0 [1][2][3][10][11][12][13][14] |
| ||||
3.0 | 5350 (Configuration A, B, C), 5340 (Configuration A, B, C, D, E, F, G, H, J), 5250 (Configuration A, B, C, D, E, F), 5150 | 10.2, 10.1.1, 10.1, 10.0.0.1, 10.0, 9.1.0.1, 9.1 | 10.2, 10.1.1, 10.1, 10.0.0.1, 10.0, 9.1.0.1, 9.1 | 18.0, 17.1, 17.0, 16.0.1, 16.0, 15.0.2, 15.0 [1][2][10][11][12][13][14] |
| ||||
2.1.2 | 5350 (Configuration A, B, C), 5340 (Configuration A, B, C, D, E, F, G, H, J), 5250 (Configuration A, B, C, D, E, F), 5150 | 10.1, 10.0.0.1, 10.0, 9.1.0.1, 9.1, 9.0.0.1, 9.0, 8.3.0.2, 8.3.0.1 | 10.1, 10.0.0.1, 10.0, 9.1.0.1, 9.1, 9.0.0.1, 9.0, 8.3.0.2, 8.3.0.1 | 17.0, 16.0.1, 16.0, 15.0.2, 15.0, 14.0.1, 14.0, 13.0.2, 13.0.1.1 [10][11][12][13][14][15][16][17] |
| ||||
2.1.1 | 5350 (Configuration A, B, C), 5340 (Configuration A, B, C, D, E, F, G, H, J), 5250 (Configuration A, B, C, D, E, F), 5150 | 10.1, 10.0.0.1, 10.0, 9.1.0.1, 9.1, 9.0.0.1, 9.0, 8.3.0.2, 8.3.0.1 | 10.1, 10.0.0.1, 10.0, 9.1.0.1, 9.1, 9.0.0.1, 9.0, 8.3.0.2, 8.3.0.1 | 17.0, 16.0.1, 16.0, 15.0.2, 15.0, 14.0.1, 14.0, 13.0.2, 13.0.1.1 [10][11][12][13][14][15][16][17] |
| ||||
2.1 | 5350 (Configuration A, B, C), 5340 (Configuration A, B, C, D, E, F, G, H, J), 5250 (Configuration A, B, C, D, E, F), 5150 | 10.0.0.1, 10.0, 9.1.0.1, 9.1, 9.0.0.1, 9.0, 8.3.0.2, 8.3.0.1 | 10.0.0.1, 10.0, 9.1.0.1, 9.1, 9.0.0.1, 9.0, 8.3.0.2, 8.3.0.1 | 16.0.1, 16.0, 15.0.2, 15.0, 14.0.1, 14.0, 13.0.2, 13.0.1.1 [10][12][13][14][15][16][17] |
| ||||
2.0.1 | 5350 (Configuration A, B, C), 5340 (Configuration A, B, C, D, E, F, G, H, J), 5250 (Configuration A, B, C, D, E, F), 5150 | 9.1.0.1, 9.1, 9.0.0.1, 9.0, 8.3.0.2, 8.3.0.1 | 9.1.0.1, 9.1, 9.0.0.1, 9.0, 8.3.0.2, 8.3.0.1 | 15.0.2, 15.0, 14.0.1, 14.0, 13.0.2, 13.0.1.1 [12][13][15][16][17] |
| ||||
2.0 | 5340 (Configuration A, B, C, D, E, F, G, H, J), 5150 | 9.0.0.1, 9.0, 8.3.0.2, 8.3.0.1, 8.2 | 9.0.0.1, 9.0, 8.3.0.2, 8.3.0.1, 8.2 | 14.0.1, 14.0, 13.0.2, 13.0.1.1 [15][16][17] |
| ||||
1.3.1 | 5340 (Configuration A), 5150 | 8.3.0.1, 8.2, 8.1.2, 8.1.1, 8.1 [18] | 8.3.0.1, 8.2, 8.1.2, 8.1.1, 8.1 [18] | Not supported |
| ||||
1.3 | 5340 (Configuration A), 5150 | 8.3.0.1, 8.2, 8.1.2, 8.1.1, 8.1 [18] | 8.3.0.1, 8.2, 8.1.2, 8.1.1, 8.1 [18] | Not supported |
|
- WORM storage server version 17.1 requires NetBackup primary and media server version 10.1.1 or later.
- WORM storage server version 18.0 requires NetBackup primary and media server version 10.2 or later.
- WORM storage server version 18.0.1 requires NetBackup primary and media server version 10.2.0.1 or later.
- WORM storage server version 19.0 requires NetBackup primary and media server version 10.3 or later.
- WORM storage server version 19.0.1 requires NetBackup primary and media server version 10.3.0.1 or later.
- WORM storage server version 20.4 requires NetBackup primary and media server version 10.4 or later.
- WORM storage server version 20.4.0.1 requires NetBackup primary and media server version 10.4.0.1 or later.
- WORM storage server version 20.5 requires NetBackup primary and media server version 10.5 or later.
- WORM storage server version 20.5.0.1 requires NetBackup primary and media server version 10.5.0.1 or later.
- WORM storage server version 16.0.1 requires NetBackup primary and media server version 10.0.0.1 or later.
- WORM storage server version 17.0 requires NetBackup primary and media server version 10.1 or later.
- WORM storage server version 15.0 requires NetBackup primary and media server version 9.1 or later.
- WORM storage server version 15.0.2 requires NetBackup primary and media server version 9.1.0.1 or later.
- WORM storage server version 16.0 requires NetBackup primary and media server version 10.0 or later.
- WORM storage server version 13.0.2 requires NetBackup primary and media server version 8.3.0.2 or later.
- WORM storage server version 14.0 requires NetBackup primary and media server version 9.0 or later.
- WORM storage server version 14.0.1 requires NetBackup primary and media server version 9.0.0.1 or later.
- Veritas strongly recommends running NetBackup 8.2 or later with Flex Appliance.
Configuring Cloud Solutions with NetBackup Appliances
The table below shows when a NetBackup cloud configuration and device mappings RPM package is required for configuring cloud providers with NetBackup Appliances. "Included in release" means that version of the NetBackup Appliance software contains the information needed for configuring that cloud provider, so installing an RPM is not required.
Configuration for the cloud storage provider must be done using the Cloud Storage Configuration wizard in the NetBackup Administration Console. After this configuration is completed, you must manually create a backup policy for the deduplication (MSDP) pool catalog. For details, see the "NetBackup 52xx Appliance Initial Configuration Guide".
When to install a Cloud Configuration/Device Mappings RPM for NetBackup Appliance
Cloud solution | NetBackup Appliances running 5.0 |
---|---|
ACP CS3 (S3) | Included in release |
Alibaba Cloud Object Storage Service (OSS) (S3) | Included in release |
Amazon Glacier (S3) | Included in release |
Amazon Glacier Deep Archive (S3) | Included in release |
Amazon Glacier Instant Retrieval (IR) (S3) | Included in release |
Amazon GovCloud Glacier (S3) | Included in release |
Amazon GovCloud Glacier Deep Archive (S3) | Included in release |
Amazon GovCloud Glacier Instant Retrieval (IR) (S3) | Included in release |
Amazon GovCloud Simple Storage Service (S3) | Included in release |
Amazon GovCloud Simple Storage Service - Infrequent Access (S3) | Included in release |
Amazon Simple Storage Service (S3) | Included in release |
Amazon Simple Storage Service - Infrequent Access (S3) | Included in release |
Amazon Simple Storage Service - OneZone-Infrequent Access (S3) | Included in release |
AT&T Cloud Storage (S3) | Included in release |
China Mobile CMCC Cloud Storage (S3) | Included in release |
China Telecom OOS (S3) | Included in release |
Chunghwa Telecom Hicloud S3 (S3) | Included in release |
Cloudian HyperStore Object Storage (S3) | Included in release |
Dell EMC Elastic Cloud Storage (S3) | Included in release |
Dell EMC Isilon PowerScale series (S3) | Included in release |
Deutsche Telekom Open Telekom Cloud (S3) | Included in release |
Fujitsu ETERNUS CD10000 (S3) | Included in release |
Google Cloud Storage - Multi-Regional (S3) | Included in release |
Google Cloud Storage - Regional (S3) | Included in release |
Google Cloud Storage Archive (S3) | Included in release |
Google Cloud Storage Coldline (S3) | Included in release |
Google Cloud Storage Nearline (S3) | Included in release |
Hewlett Packard Enterprise Cloud Volumes (S3) | Included in release |
Hitachi Vantara Content Platform (HCP) (S3) | Included in release |
Hitachi Vantara HCP for Cloud Scale (S3) | Included in release |
IBM Cloud Object Storage - Cold Vault (S3) | Included in release |
IBM Cloud Object Storage - Private (S3) | Included in release |
IBM Cloud Object Storage - Smart Tier (S3) | Included in release |
IBM Cloud Object Storage - Standard (S3) | Included in release |
IBM Cloud Object Storage - Vault (S3) | Included in release |
Infoniqa SWISS3CLOUD (S3) | Included in release |
Microsoft Azure (Azure) | Included in release |
Microsoft Azure Germany (Azure) | Included in release |
Microsoft Azure Government (Azure) | Included in release |
NEC Cloud IaaS (S3) | Included in release |
NEC HYDRAstor HS3 and HS8 (4th Gen), iStorage HS3 and HS8 (4th Gen) and NEC Storage HS3 and HS8 (4th Gen) (S3) | Included in release |
NEC HYDRAstor HS3 and HS8 (5th Gen), iStorage HS3 and HS8 (5th Gen) and NEC Storage HS3 and HS8 (5th Gen) (S3) | Included in release |
NetApp StorageGRID Webscale Object Storage (S3) | Included in release |
NooBaa (S3) | Included in release |
Nutanix Objects (S3) | Included in release |
Oracle Cloud Infrastructure (S3) | Included in release |
Orange Business Services Flexible Engine OBS (S3) | Included in release |
Quantum Active Archive and ActiveScale Systems - Glacier (S3) | Included in release |
Quantum Active Archive and ActiveScale Systems - Standard (S3) | Included in release |
Red Hat Ceph Storage (S3) | Included in release |
Scality RING Storage (S3) | Included in release |
Seagate Lyve Cloud (S3) | Included in release |
SUSE Enterprise Storage (S3) | Included in release |
SwiftStack Object Storage (S3) | Included in release |
Telefonica Open Cloud (S3) | Included in release |
Tencent Cloud Object Storage (COS) - ARCHIVE (S3) | Included in release |
Tencent Cloud Object Storage (COS) - DEEP ARCHIVE (S3) | Included in release |
Tencent Cloud Object Storage (COS) - Archive (S3) | Included in release |
Tencent Cloud Object Storage (COS) - Standard IA (S3) | Included in release |
Veritas Alta Recovery Vault Amazon S3 | Included in release. WORM support requires the Emergency Engineering Binaries in this bundle: Veritas Alta Recovery Vault for NetBackup 10.0 |
Veritas Alta Recovery Vault Amazon GovCloud | Included in release. WORM support requires the Emergency Engineering Binaries in this bundle: Veritas Alta Recovery Vault for NetBackup 10.0 |
Veritas Alta Recovery Vault Azure | Included in release |
Veritas Alta Recovery Vault Azure Government | Included in release |
Veritas Access (S3) | Included in release |
Veritas Access 3340/3350 Appliance (S3) | Included in release |
Wasabi Hot Cloud Storage (S3) | Included in release |
NetBackup 5200 Series, 5300 Series, and Virtual Appliance Supported Functionality
The following table lists NetBackup 5200 Series, 5300 Series, and Virtual Appliance supported functionality and indicates the minimum NetBackup Appliance Release version (4.0 or later) required for support of that functionality. NetBackup 5200 Series, 5300 Series, and Virtual Appliances can be used with all supported core NetBackup clients (see the "NetBackup 10.0 - 10.x.x Operating System Software Compatibility List", application and database agents "NetBackup 10.0 - 10.x.x Database and Application Agent Compatibility List", and Snapshot client configurations.
For information on functionality supported with earlier versions of NetBackup Appliances, see the NetBackup Appliances section of the NetBackup Enterprise Server and Server 9.0 - 9.x.x Hardware and Cloud Storage Compatibility List.
NetBackup 5200 Series, 5300 Series, and Virtual Appliances - Supported Functionality
Functionality | Minimum 5.0 or later Appliance Release | Supported Appliance Models | Notes |
---|---|---|---|
NetBackup Primary/Media Server | 5.0 | 5200 Series, Virtual | The Primary Server role is only supported on 5200 Series and Virtual Appliances. Key Management Service (KMS) and NetBackup Access Control (NBAC) are not supported when the Appliance is configured as a Primary Server. |
NetBackup Media Server | 5.0 | 5200 Series, 5300 Series, Virtual | The Primary Server in the NetBackup domain must be running a version of NetBackup equal to or newer than the NetBackup version on which the appliance is based. |
NetBackup CloudCatalyst Appliance | This role is not supported with version 4.0 and later. | ||
Accelerator (for files and folders) | 5.0 | 5200 Series, 5300 Series, Virtual | |
Accelerator with NDMP | 5.0 | 5200 Series, 5300 Series, Virtual |
Supported with Dell EMC Isilon Scale-Out NAS filers, and NetApp AFF, FAS, and V series filers.
When using this feature with a NetBackup Virtual Appliance, monitor the /dev/mapper/system-log partition to ensure it does not exceed 50% of capacity, and manage log files to increase remaining partition capacity. For information on managing accelerator track log files, see "About the track log for Accelerator for NDMP". For more information on this feature, see the "About NetBackup Accelerator for NDMP". |
Accelerator with VMware-type policies | 5.0 | 5200 Series, 5300 Series, Virtual | |
Auto Image Replication to MSDP/5200 Series or 5300 Series over Ethernet | 5.0 | 5200 Series, 5300 Series, Virtual | |
Auto Image Replication to MSDP/5200 Series or 5300 Series over Fibre Channel (FC) | 5.0 | 5200 Series, 5300 Series | |
Client Deduplication / Client Direct over Ethernet | 5.0 | 5200 Series, 5300 Series, Virtual | Veritas allows NetBackup Clients to write data directly to NetBackup Storage Server Appliances.
The client hosts the deduplication plug-in that deduplicates the backup data.
The plug-in sends only unique segments to the Storage Server, reducing network traffic and distributing CPU load.
For the list of supported clients, see the "Deduplication Supported Operating Systems" section of the
"NetBackup 10.0 - 10.x.x Operating System Software Compatibility List".
Data Immutability/WORM is supported with Client Direct with NetBackup Appliances running version 4.1 and later. |
Copilot for Oracle | 5.0 | 5200 Series, 5300 Series, Virtual | For more information on this feature, see the "NetBackup Copilot for Oracle Configuration Guide". |
Fibre Transport Media Server | 5.0 | 5200 Series, 5300 Series | Supported with 8 Gb HBAs in NetBackup 5240, 5250, 5330, and 5340 Appliances.
Supported with 16 Gb HBAs in NetBackup 5240, 5250, 5340, and 5350 Appliances. |
FIPS-compliant encryption | 5.0 | 5200 Series, 5300 Series, Virtual | FIPS-compliant encryption, as defined by the Federal Information Processing Standards 140-2, can be enabled from the NetBackup Shell Menu. For more information, see the "NetBackup Appliance Security Guide". |
Granular Recovery Technology (GRT) | 5.0 | 5200 Series, 5300 Series, Virtual | |
Granular Recovery Technology (GRT) with VMware-type policies | 5.0 | 5200 Series, 5300 Series, Virtual | Support for VMware-type backup policies with Application Protection options enabled for Exchange or SharePoint. |
Instant Data Access | 5.0 | 5200 Series, 5300 Series | This feature allows you to create an Instant Access VM from a NetBackup backup image. The VM is available almost instantaneously, achieving a near-zero recovery time objective. NetBackup mounts the VM snapshot directly on the backup storage device to allow your ESXi host or cluster to treat the snapshot as a normal VM. For more information, see the "NetBackup Web UI VMware Administrator's Guide". |
Instant Recovery for VMware | 5.0 | 5200 Series, 5300 Series, Virtual | Support for restoring virtual machines with Instant Recovery is described in the
"NetBackup for VMware Administrator's Guide".
For details on supported platforms for instant recovery restore hosts, see "Support for NetBackup 7.7.x, 8.x, and 9.x in virtual environments". |
iSCSI Initator - Hardware-assisted with TCP Offload Engine (TOE) card | 5.0 | 5240 (Configuration H), 5340 (Configurations A, B, C, D, and E) | Supports backup of VMware virtual machines using VADP with SAN transport.
For more information on this feature, see the "NetBackup Appliance iSCSI Guide" and the "NetBackup for VMware Administrator's Guide". |
Key Management Service (KMS) | 5.0 | 5200 Series, 5300 Series | KMS is supported with Appliances configured as either a Primary or a Media Server. With a NetBackupCLI administrator account in the NetBackup Appliance Shell Menu, an Appliance Primary Server can administrate KMS with tape devices connected to itself or another NetBackup Appliance. Regenerating the data encryption key is the only supported method of recovering KMS on an Appliance Primary Server. |
NetBackup Access Control (NBAC) | 5.0 | 5200 Series, 5300 Series | Supported when the Appliance is configured as a Media Server only.
Not supported when the Appliance is configured as a Primary Server. |
NDMP | 5.0 | 5200 Series, 5300 Series, Virtual | Supported NDMP solutions are listed in the NDMP devices Vendor Compatibility section. |
NetBackup Cluster | There are no plans to support this feature. | ||
NetBackup OpenStorage Cloud and Third-Party Plug-in Support | 5.0 | 5200 Series, 5300 Series, Virtual | Supported plug-ins are listed in the "Support with NetBackup Appliance" tables shown in the OST Cloud and OST Storage Servers Vendor Compatibility sections.
For instructions on installing vendor plug-in packages on NetBackup Appliances, see "About OpenStorage plugin installation". |
NFSv4 | 5.0 | 5200 Series, 5300 Series, Virtual | All shares exported by the appliance can be mounted using NFSv4, including system shares and backup shares such as Universal shares and Copilot shares. |
OpsCenter | 5.0 | 5200 Series, 5300 Series, Virtual | |
OpsCenter Managed Server | 5.0 | 5200 Series, 5300 Series, Virtual | |
Optimized Duplication (Opt_Dup) over Ethernet | 5.0 | 5200 Series, 5300 Series, Virtual | Supported from 5200/5300 Series/Virtual to 5200/5300 Series/Virtual (MSDP to MSDP). |
Optimized Duplication (Opt_Dup) over Fibre Channel (FC) | 5.0 | 5200 Series, 5300 Series | Supported from 5200/5300 Series to 5200/5300 Series (MSDP to MSDP) |
Optimized Synthetics (Opt_Synth) | 5.0 | 5200 Series, 5300 Series, Virtual | |
Tape Drive Support | 5.0 | 5200 Series, 5300 Series | Supported tape drives are listed in the "Support with NetBackup Appliance" tables shown in the Tape Drives Vendor Compatibility section. Shared Storage Option (SSO) is supported. |
Tape Library Support | 5.0 | 5200 Series, 5300 Series | Supported tape libraries are listed with the notes "This library is also supported with NetBackup 5200 Series and 5300 Series Appliances" and "This library is also supported with the NetBackup 5240 Series Appliance with a SAS tape-out adapter" in the Tape Libraries Vendor Compatibility section. Use the NetBackup Device Configuration Wizard within the NetBackup Adminstration Console to configure robots and tape drives on the NetBackup Appliance. |
Universal Shares | 5.0 | 5200 Series, 5300 Series | For more information on configuring Universal Shares, see Manage > Storage > Universal Shares |
Virtual Tape Library (VTL) Support | 5.0 | 5200 Series, 5300 Series | Supported VTLs are listed in the "Support with NetBackup Appliance" tables shown in the Virtual Tape Libraries Vendor Compatibility section. Use the NetBackup Device Configuration Wizard within the NetBackup Adminstration Console to configure VTLs and emulated tape drives on the NetBackup Appliance. |
Snapshot Solutions
NetBackup protects snapshots with the following features: NetBackup Snapshot Manager, Replication Director, and Snapshot Client.
NetBackup Snapshot Manager
For more information about configuring NetBackup snapshot manager for storage array snapshots,
refer to the "NetBackup™ Snapshot Manager for Data Center Administrator's guide".
For information on hardware and cloud applications that are compatible with earlier versions of NetBackup Snapshot Manager (CloudPoint),
see the CloudPoint compatibility lists at NetBackup Compatibility
NetBackup Snapshot Manager - Considerations
Subject | Notes |
---|---|
Vendor support considerations |
1. All storage configurations shown in the tables below were tested with drivers and firmware supported by the storage array vendors.
Check with these vendors for minimum driver and firmware levels, specific driver and firmware support, support for the stated Veritas products, and other functional options.
2. Veritas supports hardware products listed below that include virtualization capability, but Veritas does not support compatibility issues that can be attributed to the virtualization feature. Veritas requires any compatibility issue to be reproduced in a non-virtualization environment. If the issue is confirmed to be related to Veritas products, Veritas will support its software at the same level as when that software is not running with hardware virtualization products. Veritas will cooperate with virtualization vendors, and attempt to assist in the diagnosis of problems found between the virtualization and Veritas products. 3. Minor ("double-dot") versions of the software listed in the tables below are also supported. (Example: "v5.0" means versions v5.0.1, v5.0.2, etc. are also supported.) |
General considerations | With NetBackup 10.1 onwards, NetBackup CloudPoint is renamed as NetBackup Snapshot Manager. |
Consistency Group Snapshots | NetBackup Snapshot Manager support consistency group (CG) snapshots for SAN storage arrays wherever CG level snapshot is optimal and applicable. The supported hardware table below mentions whether NetBackup Snapshot Manager performs CG level snapshot for a particular storage array vendor or not. |
Storage Array Replication |
With NetBackup 10.1 onwards, NetBackup Snapshot Manager can replicate the NAS storage array snapshots that are taken by NetBackup. You must upgrade the NetBackup primary server, media server, and clients to version 10.1 and above to use the replication capabilities. Refer to the "NetBackup™ Snapshot Manager for Data Center Administrator's guide" for more details about replication.
With NetBackup 10.5 onwards, NetBackup Snapshot Manager can replicate the SAN storage array snapshots that are taken by NetBackup with Standard policies. The supported hardware table below mentions whether NetBackup Snapshot Manager supports Storage Array Replication for a particular storage array vendor or not. |
Considerations and Limitations | Refer to the appropriate storage array plug-in section from Storage array plug-ins chapter in "NetBackup™ Snapshot Manager for Data Center Administrator's guide". |
NetBackup Snapshot Manager - Vendor Compatibility
Dell EMC | Fujitsu | Hewlett Packard Enterprise | Hitachi Vantara | IBM | Infinidat | Lenovo | Microsoft | NetApp | Nutanix | Pure Storage | Qumulo | VMware
Dell EMC
Dell EMC - Supported Hardware
Device/Family | Array Management Software | Export Protocols | Storage Array Replication | Consistency Group Snapshots | Supported NetBackup Policy Types |
---|---|---|---|---|---|
PowerFlex series | PowerFlex 3.6 and later | SAN: Fibre Channel, iSCSI | No | No | DB2, Oracle, Standard |
PowerMax series | Unisphere v9.2 and later
Array microcode version 5968.669.669 or later | SAN: Fibre Channel | No | Yes | DB2, Oracle, Standard |
PowerMax series [1] | Unisphere v9.2 and later | NAS: NFS, SMB | No | N/A | NAS-Data-Protection, VMware |
| |||||
PowerScale series | OneFS 8.0 and later | NAS: NFS, SMB | No | N/A | NAS-Data-Protection, VMware |
PowerStore series | PowerStore OS Version 2.0 and later | SAN: Fibre Channel, iSCSI | No | Yes | DB2, Oracle, Standard |
PowerStore series | PowerStore OS Version 2.0.1.2 and later | NAS: NFS, SMB | No | N/A | NAS-Data-Protection, VMware |
Unity series | Unity Operating Environment 4.2 and later | SAN: Fibre Channel, iSCSI | No | Yes | DB2, Oracle, Standard |
Unity series | Unity Operating Environment 4.2 and later | NAS: NFS, SMB | No | N/A | NAS-Data-Protection, VMware |
XtremIO series | XMS version 6.0.1 and later | SAN: Fibre Channel, iSCSI | No | No | DB2, Oracle, Standard |
Dell EMC - Family Membership
Device Family | Members | Vendor website |
---|---|---|
XtremIO series | XtremIO x2 | Introduction to Dell EMC XtremIO X2 Storage Array |
PowerFlex series | PowerFlex R640, R740xd, R840 | Dell PowerFlex |
PowerMax series | PowerMax 2000, PowerMax 8000 | Dell PowerMax |
PowerScale series | PowerScale A300, PowerScale A3000, PowerScale F200, PowerScale F600, PowerScale F900, PowerScale H700, PowerScale H7000, Isilon A200, Isilon A2000, Isilon F800, Isilon F810, Isilon H400, Isilon H500, Isilon H600, Isilon H5600 | Dell PowerScale |
PowerStore series | PowerStore 1000T, PowerStore 3000T, PowerStore 5000T, PowerStore 7000T, PowerStore 9000T | Dell PowerStore |
VMAX All Flash series | VMAX All Flash 250F, VMAX All Flash 950F | Dell VMAX All Flash Storage |
VMAX3 series | VMAX3 100K, VMAX3 200K, VMAX3 400K | Dell EMC VMAX3 Family Product Guide |
Unity series | Unity 300, Unity 300F, Unity 350F, Unity 400, Unity 400F, Unity 450F, Unity 500, Unity 500F, Unity 550F, Unity 600, Unity 600F, Unity 650F | Dell Unity |
Fujitsu
Fujitsu - Supported Hardware
Device/Family | Array Management Software | Export Protocols | Storage Array Replication | Consistency Group Snapshots | Supported NetBackup Policy Types |
---|---|---|---|---|---|
Fujitsu Eternus AF/DX Series | Fujitsu Controller Firmware Version V11L40 and later | SAN: Fibre Channel, iSCSI | No | No | DB2, Oracle, Standard |
Fujitsu Eternus AB/HB Series [1] | SANtricity Storage Manager 11.6 and later | SAN: Fibre Channel, iSCSI | No | No | Standard |
| |||||
Fujitsu Eternus AX/HX Series [2] | Data ONTAP Release 9.12.1 and later | SAN: Fibre Channel, iSCSI | No | No | Standard |
| |||||
Fujitsu Eternus AX/HX Series [2] | Data ONTAP Release 9.12.1 and later | NAS: NFS, SMB | No | N/A | NAS-Data-Protection |
|
- Fujitsu Eternus AB/HB Series is supported from NetBackup 10.3
- Fujitsu Eternus AX/HX Series is supported from NetBackup 10.5
Fujitsu - Family Membership
Device Family | Members | Vendor website |
---|---|---|
Fujitsu AF/DX Series | AF250S3, DX200S5 | Fujitsu ETERNUS Storage |
Fujitsu AB/HB Series | AB2100, AB3100, AB5100, AB6100, HB1100/HB1200, HB2100/HB2200/HB2300, HB5100/HB5200 | Fujitsu ETERNUS Storage |
Fujitsu AX/HX Series | All supported models | Fujitsu ETERNUS Storage |
Hewlett Packard Enterprise
Hewlett Packard Enterprise - Supported Hardware
Device/Family | Array Management Software | Export Protocols | Storage Array Replication | Consistency Group Snapshots | Supported NetBackup Policy Types |
---|---|---|---|---|---|
3PAR F-Class/T-Class series | RMC 6.0 and later | SAN: Fibre Channel, iSCSI | Yes [1][2] | Yes | DB2, Oracle, Standard |
| |||||
3PAR StoreServ Storage series | RMC 6.0 and later | SAN: Fibre Channel, iSCSI | Yes [1][2] | Yes | DB2, Oracle, Standard |
| |||||
Nimble Storage series | RMC 6.2 and later | SAN: Fibre Channel, iSCSI | Yes [1][2] | No | DB2, Oracle, Standard |
| |||||
Primera series | RMC 6.2 and later | SAN: Fibre Channel, iSCSI | Yes [1][2] | No | DB2, Oracle, Standard |
| |||||
XP series | HPE Configuration Manager version 10.0 and later | SAN: Fibre Channel, iSCSI | No | No | DB2, Oracle, Standard |
Alletra 6000 [3] | 6.0.0.500-1005932-opt | SAN: Fibre Channel, iSCSI | No | No | Standard |
| |||||
Alletra 9000 [4] | 9.5.1.2 | SAN: Fibre Channel, iSCSI | No | No | Standard |
| |||||
Alletra MP B10000 (GreenLake for Block) [5] | 10.2.0.25 | SAN: Fibre Channel, iSCSI | No | No | Standard |
|
- Supported with Standard policies from NetBackup 10.5 onwards.
- Only “Peer copy” replication relationship is supported, cascade and fan-out relationships are not supported.
- Alletra 6000 is supported from NetBackup 10.2
- Alletra 9000 is supported from NetBackup 10.1.1
- HPE Alletra MP B10000 (GreenLake for Block) is supported from NetBackup 10.4
Hewlett Packard Enterprise - Family Membership
Device Family | Members | Vendor website |
---|---|---|
3PAR F-Class/T-Class series | 3PAR F200 Storage, 3PAR F400 Storage, 3PAR T400 Storage, 3PAR T800 Storage | HPE 3PAR F200 and F400 Storage Systems
HP 3PAR T-Class Storage System |
3PAR StoreServ Storage series | 3PAR StoreServ 7200 Storage, 3PAR StoreServ 7400 Storage, 3PAR StoreServ 7450 Storage, 3PAR StoreServ 8200 Storage, 3PAR StoreServ 8400 Storage, 3PAR StoreServ 8440 Storage, 3PAR StoreServ 8450 Storage, 3PAR StoreServ 10400 Storage, 3PAR StoreServ 10800 Storage, 3PAR StoreServ 20450 Storage, 3PAR StoreServ 20800 Storage, 3PAR StoreServ 20850 Storage | HPE 3PAR StoreServ Storage |
Primera 600 series | Primera 630, Primera 650, Primera 670 | HPE Primera |
Nimble Storage series | AF20Q, AF20, AF40, AF60, AF80, AFS3, HF20/HF20C, HF20H. HF40/HF40C, HF60/HF60C, ES3 | HPE Nimble Storage |
XP series | XP7, XP8 | HPE XP STORAGE ARRAYS |
Hitachi Vantara
Hitachi Vantara - Supported Hardware
Device/Family | Array Management Software | Export Protocols | Storage Array Replication | Consistency Group Snapshots | Supported NetBackup Policy Types |
---|---|---|---|---|---|
Virtual Storage Platform 5000 Series | Hitachi Configuration Manager (HCM) 8.6 and later | SAN: Fibre Channel, iSCSI | No | No | DB2, Oracle, Standard |
Virtual Storage Platform E Series | Hitachi Configuration Manager (HCM) 8.6 and later | SAN: Fibre Channel, iSCSI | No | No | DB2, Oracle, Standard |
Virtual Storage Platform F Series | Hitachi Configuration Manager (HCM) 8.6 and later | SAN: Fibre Channel, iSCSI | No | No | DB2, Oracle, Standard |
Virtual Storage Platform G Series | Hitachi Configuration Manager (HCM) 8.6 and later | SAN: Fibre Channel, iSCSI | No | No | DB2, Oracle, Standard |
Hitachi NAS (HNAS) | System Management Unit (SMU) 13.5.5336.02 and later | NAS: NFS, SMB | No | N/A | NAS-Data-Protection, VMware |
Hitachi Vantara - Family Membership
Device Family | Members | Vendor website |
---|---|---|
Virtual Storage Platform 5000 series | VSP 5100, VSP 5200, VSP 5500, VSP 5600 | Hitachi Virtual Storage Platform 5000 Series |
Virtual Storage Platform E series | VSP E590, VSP E790, VSP E990, VSP E1090 [1] | Hitachi Virtual Storage Platform E Series |
| ||
Virtual Storage Platform F series | VSP F350, VSP F370, VSP F400, VSP F600, VSP F700, VSP F800, VSP F900, VSP F1500 | Hitachi Virtual Storage Platform F Series |
Virtual Storage Platform G series | VSP G100, VSP G130, VSP G150, VSP G200, VSP G350, VSP G370, VSP G400, VSP G600, VSP G700, VSP G800, VSP G900, VSP G1000, VSP G1500 | Hitachi Virtual Storage Platform G Series |
Hitachi NAS (HNAS) series | HNAS 4060, HNAS 4080, HNAS 4100, HNAS 5200, HNAS 5300 | Hitachi NAS Platform |
IBM
IBM - Supported Hardware
Device/Family | Array Management Software | Export Protocols | Storage Array Replication | Consistency Group Snapshots | Supported NetBackup Policy Types |
---|---|---|---|---|---|
Storwize V7000 series | Storwize V7000 8.3x and later | SAN: Fibre Channel, iSCSI | No | Yes | DB2, Oracle, Standard |
FlashSystem series [1] | FlashSystem 8.5.x and later | SAN: Fibre Channel, iSCSI | No | Yes | Standard |
| |||||
SAN Volume Controller series [2] | SAN Volume Controller 8.5.x and later | SAN: Fibre Channel, iSCSI | No | Yes | Standard |
|
- IBM FlashSystem series is supported from NetBackup 10.4
- IBM SAN Volume Controller is supported from NetBackup 10.4
IBM - Family Membership
Device Family | Members | Vendor website |
---|---|---|
Storwize V7000 series | Storwize V7000 Gen1, Storwize V7000 Gen2, Storwize V7000 Gen2+, Storwize V7000 Gen3 | IBM Storwize V7000 |
FlashSystem series | FlashSystem 5000, 5100, 5200, 5300, 7300, 9100, 9200, 9500 | IBM FlashSystem series |
SAN Volume Controller series | SVC 2145, 2147 | IBM SAN Volume Controller |
Infinidat
Infindat - Supported Hardware
Device/Family | Array Management Software | Export Protocols | Storage Array Replication | Consistency Group Snapshots | Supported NetBackup Policy Types |
---|---|---|---|---|---|
InfiniBox series | InfiniBox 4.0 and later | SAN: Fibre Channel, iSCSI | No | Yes | DB2, Oracle, Standard |
Infinidat - Family Membership
Device Family | Members | Vendor website |
---|---|---|
InfiniBox series | F2200, F2300, F4200, F4300, F6200, F6300 | InfiniBox |
Lenovo
Lenovo - Supported Hardware
Device/Family | Array Management Software | Export Protocols | Storage Array Replication | Consistency Group Snapshots | Supported NetBackup Policy Types |
---|---|---|---|---|---|
ThinkSystem DM series [1] | Data ONTAP 9.4 and later | SAN: Fibre Channel, iSCSI | No | Yes | DB2, Oracle, Standard |
| |||||
ThinkSystem DM series [1] | Data ONTAP 9.4 and later | NAS: NFS, SMB | Yes [2] | N/A | NAS-Data-Protection, VMware |
|
- Lenovo ThinkSystem DM series is supported from NetBackup 10.3
- Replication feature is supported with Data ONTAP version 9.x and above.
Lenovo - Family Membership
Device Family | Members | Vendor website |
---|---|---|
ThinkSystem DM series | DM7100F, DM5100F, DM5000F, DM5000H, DM3000H | ThinkSystem DM series |
Microsoft
Microsoft - Supported Hardware
Device/Family | Array Management Software | Export Protocols | Storage Array Replication | Consistency Group Snapshots | Supported NetBackup Policy Types |
---|---|---|---|---|---|
Azure Files [1] | N/A | NAS: NFS, SMB | No | N/A | NAS-Data-Protection |
|
NetApp
NetApp - Supported Hardware
Device/Family | Array Management Software | Export Protocols | Storage Array Replication | Consistency Group Snapshots | Supported NetBackup Policy Types |
---|---|---|---|---|---|
AFF and FAS series | Data ONTAP 8.3.2 and later | SAN: Fibre Channel, iSCSI | Yes [1] | Yes | DB2, Oracle, Standard |
| |||||
AFF and FAS series | Data ONTAP 8.3.2 and later | NAS: NFS, SMB | Yes [2] | N/A | NAS-Data-Protection, VMware |
| |||||
E5600 [3] | SANtricity Storage Manager 11.4 | SAN: Fibre Channel, iSCSI | No | No | Standard |
| |||||
EF300SASExpansion [3] | SANtricity OS Software 68.72.49.84 | SAN: Fibre Channel, iSCSI | No | No | Standard |
| |||||
Cloud Volume ONTAP (CVO) AWS [4] | ONTAP 9.13.1 and later | NAS: NFS, SMB | Yes | N/A | NAS-Data-Protection |
| |||||
Cloud Volume ONTAP (CVO) Azure [5] | ONTAP 9.13.1 and later | NAS: NFS, SMB | Yes | N/A | NAS-Data-Protection |
| |||||
Amazon FSx for NetApp ONTAP [6] | ONTAP 9.10 and later | NAS: NFS, SMB | Yes | N/A | NAS-Data-Protection |
| |||||
Amazon FSx for NetApp ONTAP [6] | ONTAP 9.10 and later | SAN: iSCSI | No | No | Standard |
| |||||
Azure NetApp Files [7] | Managed by Azure | NAS: NFS, SMB | No | N/A | NAS-Data-Protection |
|
- Supported with Standard policies from NetBackup 10.5 onwards.
- Replication feature is supported with Data ONTAP version 9.x and above.
- NetApp E-series is supported from NetBackup 10.1.1.
- Cloud Volume ONTAP (CVO) AWS is supported from NetBackup 10.3.0.1.
- Cloud Volume ONTAP (CVO) Azure is supported from NetBackup 10.3.0.1.
- Amazon FSx for NetApp ONTAP is supported from NetBackup 10.4.
- Azure NetApp Files is supported from NetBackup 10.4.0.1 onwards.
NetApp - Family Membership
Device Family | Members | Vendor website |
---|---|---|
AFF series | AFF A220, AFF A400, AFF A700, AFF A800 | AFF A-Series |
FAS series | FAS2220, FAS2240, FAS2520, FAS2552, FAS2554, FAS2620, FAS2650, FAS2720, FAS2750, FAS8020, FAS8200, FAS9000 | FAS storage systems |
Nutanix
Nutanix - Supported Hardware
Device/Family | Array Management Software | Export Protocols | Storage Array Replication | Consistency Group Snapshots | Supported NetBackup Policy Types |
---|---|---|---|---|---|
Nutanix Files [1] | Nutanix Files 4.2 and later | NAS: NFS, SMB | No | N/A | NAS-Data-Protection |
|
- For more information, see Nutanix Files Storage
Pure Storage
Pure Storage - Supported Hardware
Device/Family | Array Management Software | Export Protocols | Storage Array Replication | Consistency Group Snapshots | Supported NetBackup Policy Types |
---|---|---|---|---|---|
FlashArray series | Purity OS 5.1 and later | SAN: Fibre Channel | No | Yes | DB2, Oracle, Standard |
FlashBlade series | Purity//FB 3.0 and later | NAS: NFS, SMB | No | N/A | NAS-Data-Protection, VMware |
Pure Storage - Family Membership
Device Family | Members | Vendor website |
---|---|---|
FlashArray series | FA-400, FA-405, FA-420, FA-450, FlashArray//C60-366, FlashArray//C60-878, FlashArray//C60-1390, FlashArray//M10, FlashArray//M20, FlashArray//M50, FlashArray//M70, FlashArray//X10, FlashArray//X20, FlashArray//X50, FlashArray//X70, FlashArray//X90 | How-To: Configuring FlashArray With Veritas CloudPoint
How-To: Rapid Backup And Restore With FlashArray And NetBackup |
FlashBlade series | No | FlashBlade |
Qumulo
Qumulo - Supported Hardware
Device/Family | Array Management Software | Export Protocols | Storage Array Replication | Consistency Group Snapshots | Supported NetBackup Policy Types |
---|---|---|---|---|---|
Qumulo Core | 3.0.5 and later | NAS: NFS, SMB | No | N/A | NAS-Data-Protection, VMware |
VMware
VMware - Supported Hardware
Device/Family | Array Management Software | Export Protocols | Storage Array Replication | Consistency Group Snapshots | Supported NetBackup Policy Types |
---|---|---|---|---|---|
VMware vSAN File Services [1] | vCenter/vSphere 7.x or later | NAS: NFS, SMB | No | No | NAS-Data-Protection, VMware |
|
VMware - Family Membership
Device Family | Members | Vendor website |
---|---|---|
VMware vSAN File Services | vSAN 7, vSAN 8 | vSAN |
Replication Director
The NetBackup Replication Director feature offers a single NetBackup interface for end-to-end data protection for unified policy management, snapshot copy management, snapshot copy monitoring, and global search and restore.
Replication Director support information is listed below, organized by vendor. The tables provide information on the versions of software tested, supported attachment methods and functionality, and other important notes about the hardware and its compatibility.
For more information on NetBackup Replication Director, see "About NetBackup Replication Director". This document contains links to important information about Replication Director requirements, latest issues, best practices, product documentation, limitations, and eLearning tutorial videos.
Replication Director - Considerations | Replication Director - Supported Platforms for Block-attached Storage | Replication Director - Supported Platforms for NAS-attached Storage | Replication Director - Links to Vendor Sites | Replication Director - Supported Functionality | Replication Director - Vendor Compatibility
Replication Director - Considerations
Subject | Notes |
---|---|
Support assumptions |
For details on supported operating systems, please refer to the "NetBackup 10.0 - 10.x.x Operating System Software Compatibility List".
1. Where support is shown for NetBackup 5200 Series or 5300 Series Appliances it means that the OST solution is supported on appliances running versions 3.2 or later, unless noted otherwise. 2. Where support is shown for "Windows Server 2012 Datacenter" it also means that the other editions of Windows Server 2012, Windows Storage Server 2012, Windows Server 2012 R2, and Windows Storage Server 2012 R2 are supported. 3. Where support is shown for "Windows Server 2016 Datacenter" it also means that the other editions of Windows Server 2016 and Windows Storage Server 2016 are supported. 4. Where support is shown for "Windows Server 2019 Datacenter" it also means that the other editions of Windows Server 2019 are supported. 5. CentOS and Oracle Linux are not supported with Replication Director, unless noted otherwise. 6. SUSE Linux Enterprise Server 12 support requires SP3 or later. |
Vendor support considerations |
1. In the vendor compatibility tables below, the column "Vendor Software" lists the vendor-supplied software that communicates with NetBackup OpenStorage.
Refer to the storage vendor's NetBackup Replication Director site for details on the components that comprise this package.
2. Minor versions of the vendor software listed in the tables below are also supported. (Example: Version "2.0" means versions 2.0.1, 2.0.2, 2.0p1, 2.0p2, etc. are also supported. Version "3" means versions 3.1, 3.2, 3.1p1, 3.1p2, etc. are also supported.) |
Replication Director - Supported Platforms for Block-attached Storage
Replication Director is supported with block-attached storage on the NetBackup Client and Media Server platforms listed in the table below. The table indicates the NetBackup version (9.0 or later) at which that platform was first supported with block-attached storage with Replication Director. The table also lists the file systems and multipathing tools supported on each platform.
Operating System | NetBackup 10.0 (or later) Client Start of Support | NetBackup 10.0 (or later) Media Server Start of Support | File System/Volume Manager | Multipathing Tools |
---|---|---|---|---|
Red Hat Enterprise Linux 7 on x86-64 | Not supported | 10.0 | ||
Solaris 10 on SPARC | 10.0 | This platform is not supported as a media server with NetBackup 10.0 and later | VxFS/VxVM
UFS/none | VxDMP
Solaris MPxIO |
SUSE Linux Enterprise Server 12 on x86-64 | Not supported | 10.0 | ||
Windows Server 2016 on x64 | Not supported | 10.0 | ||
Replication Director - Supported Platforms for NAS-attached Storage
Replication Director is supported with NAS-attached storage on the NetBackup Client and Media Server platforms listed in the table below. The table indicates the NetBackup version (10.0 or later) at which that platform was first supported with NAS-attached storage with Replication Director.
With NAS-attached storage, Replication Director supports NFS file systems on UNIX platforms and CIFS file systems on Windows platforms.
Operating System | NetBackup 10.0 (or later) Client Start of Support | NetBackup 10.0 (or later) Media Server Start of Support |
---|---|---|
Red Hat Enterprise Linux 7 on x86-64 | 10.0 | 10.0 |
Solaris 10 on SPARC | 10.0 | This platform is not supported as a media server with NetBackup 10.0 and later |
Solaris 11 on SPARC | 10.0 | This platform is not supported as a media server with NetBackup 10.0 and later |
SUSE Linux Enterprise Server 12 on x86-64 | 10.0 [1] | 10.0 [1] |
| ||
Windows Server 2012 on x64 | 10.0 | 10.0 |
Windows Server 2012 R2 on x64 | 10.0 | 10.0 |
Windows Server 2016 on x64 | 10.0 | 10.0 |
Replication Director - Links to Vendor Sites
Vendor-specific information on NetBackup Replication Director solutions is available at the storage vendor's website. The following table also contains links to Veritas Articles with information on identifying the version of the NetBackup Replication Director plug-in.
Vendor | Vendor Replication Director Solution Information/Compatibility | Vendor Software Version Information |
---|---|---|
NetApp | NetApp Interoperability Matrix Tool | "Software required to use Replication Director" |
Replication Director - Supported Functionality
The following table lists NetBackup Replication Director functionality and indicates the NetBackup version (10.0 or later) at which that functionality was first supported. For more information on Replication Director functionality, see the "NetBackup Replication Director Solutions Guide".
For supported versions of agents, see the "NetBackup 10.0 - 10.x.x Database and Application Agent Compatibility List". The version information contained in that document also applies to databases and applications residing in VMware Virtual Machines.
For supported versions of VMware, see "Support for NetBackup 7.7.x, 8.x, and 9.x in virtual environments".
NetBackup-directed Operations | Abbreviation | NetBackup 10.0 (or later) Start of Support |
---|---|---|
Array-based Restore | Array-based_Restore | 10.0 |
Snapshot Management for File System | Snapshot_Mgmt_FS | 10.0 |
Snapshot Replication for File System | Snapshot_Repl_FS | 10.0 |
Snapshot Management for Oracle | Snapshot_Mgmt_Oracle | 10.0 |
Snapshot Replication for Oracle | Snapshot_Repl_Oracle | 10.0 |
Snapshot Management for VMware | Snapshot_Mgmt_VMware | 10.0 |
Snapshot Replication for VMware | Snapshot_Repl_VMware | 10.0 |
Snapshot Management for Microsoft Exchange on VMware | Snapshot_Mgmt_VMware_Exchange | 10.0 |
Snapshot Replication for Microsoft Exchange on VMware | Snapshot_Repl_VMware_Exchange | 10.0 |
Snapshot Management for Microsoft SQL Server on VMware | Snapshot_Mgmt_VMware_SQL | 10.0 |
Snapshot Replication for Microsoft SQL Server on VMware | Snapshot_Repl_VMware_SQL | 10.0 |
Snapshot Management for Oracle on NFS Storage | Snapshot_Mgmt_Oracle_NFS | 10.0 |
Snapshot Replication for Oracle on NFS Storage | Snapshot_Repl_Oracle_NFS | 10.0 |
Snapshot Management for VMware with NFS Attached Datastores | Snapshot_Mgmt_VMware_NFS | 10.0 |
Snapshot Replication for VMware with NFS Attached Datastores | Snapshot_Repl_VMware_NFS | 10.0 |
Snapshot Management for Microsoft Exchange on VMware with NFS Attached Datastores | Snapshot_Mgmt_VMware_Exchange_NFS | 10.0 |
Snapshot Replication for Microsoft Exchange on VMware with NFS Attached Datastores | Snapshot_Repl_VMware_Exchange_NFS | 10.0 |
Snapshot Management for Microsoft SQL Server on VMware with NFS Attached Datastores | Snapshot_Mgmt_VMware_SQL_NFS | 10.0 |
Snapshot Replication for Microsoft SQL Server on VMware with NFS Attached Datastores | Snapshot_Repl_VMware_SQL_NFS | 10.0 |
Replication Director - Vendor Compatibility
NetApp
NetApp - Support with NetBackup Appliance
Storage Family | Attachment Method | NetBackup Version Containing Plug-in or Vendor-Supplied Plug-in Version | Compatible Vendor Software | Supported Functionality | NetBackup Client Support | NetBackup Media Server Support | 5200 Series | 5300 Series |
---|---|---|---|---|---|---|---|---|
FAS Series | NAS | NetApp Plug-in 2.0.1 for Symantec NetBackup | ONTAP 9.0
OnCommand Unified Manager 6.4P2 and later OnCommand Unified Manager 7.0 OnCommand Unified Manager 7.1 See the Replication Director Vendor Links table for more information. | Array-based_Restore
Snapshot_Mgmt_FS Snapshot_Repl_FS Snapshot_Mgmt_Oracle_NFS Snapshot_Repl_Oracle_NFS Snapshot_Mgmt_VMware_NFS Snapshot_Repl_VMware_NFS Snapshot_Mgmt_VMware_Exchange_NFS Snapshot_Repl_VMware_Exchange_NFS Snapshot_Mgmt_VMware_SQL_NFS Snapshot_Repl_VMware_SQL_NFS | Yes | Yes | Yes | Yes |
FAS Series | NAS | NetApp Plug-in 2.0.1 for Symantec NetBackup | ONTAP 9.1
OnCommand Unified Manager 7.0 OnCommand Unified Manager 7.1 See the Replication Director Vendor Links table for more information. | Array-based_Restore
Snapshot_Mgmt_FS Snapshot_Repl_FS Snapshot_Mgmt_Oracle_NFS Snapshot_Repl_Oracle_NFS Snapshot_Mgmt_VMware_NFS Snapshot_Repl_VMware_NFS Snapshot_Mgmt_VMware_Exchange_NFS Snapshot_Repl_VMware_Exchange_NFS Snapshot_Mgmt_VMware_SQL_NFS Snapshot_Repl_VMware_SQL_NFS | Yes | Yes | Yes | Yes |
AFF and FAS Series | NAS | NetApp Plug-in 2.0.1 for Symantec NetBackup | ONTAP 9.2
ONTAP 9.3 OnCommand Unified Manager 7.2 OnCommand Unified Manager 7.3 See the Replication Director Vendor Links table for more information. | Array-based_Restore
Snapshot_Mgmt_FS Snapshot_Repl_FS Snapshot_Mgmt_Oracle_NFS Snapshot_Repl_Oracle_NFS Snapshot_Mgmt_VMware_NFS Snapshot_Repl_VMware_NFS Snapshot_Mgmt_VMware_Exchange_NFS Snapshot_Repl_VMware_Exchange_NFS Snapshot_Mgmt_VMware_SQL_NFS Snapshot_Repl_VMware_SQL_NFS | Yes | Yes | Yes | Yes |
AFF and FAS Series | NAS | NetApp Plug-in 2.0.1 for Symantec NetBackup | ONTAP 9.4
ONTAP 9.5 OnCommand Unified Manager 9.4 OnCommand Unified Manager 9.5 See the Replication Director Vendor Links table for more information. | Array-based_Restore
Snapshot_Mgmt_FS Snapshot_Repl_FS Snapshot_Mgmt_Oracle_NFS Snapshot_Repl_Oracle_NFS Snapshot_Mgmt_VMware_NFS Snapshot_Repl_VMware_NFS Snapshot_Mgmt_VMware_Exchange_NFS Snapshot_Repl_VMware_Exchange_NFS Snapshot_Mgmt_VMware_SQL_NFS Snapshot_Repl_VMware_SQL_NFS | Yes | Yes | Yes | Yes |
AFF and FAS Series | NAS | NetApp Plug-in 2.0.1 for Symantec NetBackup | ONTAP 9.6
ONTAP 9.7 ActiveIQ Unified Manager 9.6 ActiveIQ Unified Manager 9.7 See the Replication Director Vendor Links table for more information. | Array-based_Restore
Snapshot_Mgmt_FS Snapshot_Repl_FS Snapshot_Mgmt_Oracle_NFS Snapshot_Repl_Oracle_NFS Snapshot_Mgmt_VMware_NFS Snapshot_Repl_VMware_NFS Snapshot_Mgmt_VMware_Exchange_NFS Snapshot_Repl_VMware_Exchange_NFS Snapshot_Mgmt_VMware_SQL_NFS Snapshot_Repl_VMware_SQL_NFS | Yes | Yes | Yes | Yes |
NetApp - Support with Windows / Linux
Storage Family | Attachment Method | NetBackup Version Containing Plug-in or Vendor-Supplied Plug-in Version | Compatible Vendor Software | Supported Functionality | NetBackup Client Support | NetBackup Media Server Support | Windows Server 2012 x64 | Windows Server 2016 x64 | Red Hat Enterprise Linux on x86-64 | SUSE Linux Enterprise Server on x86-64 |
---|---|---|---|---|---|---|---|---|---|---|
FAS Series [1][2][3] | NAS | NetApp Plug-in 2.0 for Symantec NetBackup | Clustered Data ONTAP 8.2.3
Clustered Data ONTAP 8.2.4 Clustered Data ONTAP 8.3 Clustered Data ONTAP 8.3.1 Clustered Data ONTAP 8.3.2 OnCommand Unified Manager 6.2 OnCommand Unified Manager 6.3 OnCommand Unified Manager 6.4 See the Replication Director Vendor Links table for more information. | Array-based_Restore
Snapshot_Mgmt_FS Snapshot_Repl_FS Snapshot_Mgmt_Oracle_NFS Snapshot_Repl_Oracle_NFS Snapshot_Mgmt_VMware_NFS Snapshot_Repl_VMware_NFS Snapshot_Mgmt_VMware_Exchange_NFS Snapshot_Repl_VMware_Exchange_NFS Snapshot_Mgmt_VMware_SQL_NFS Snapshot_Repl_VMware_SQL_NFS | Yes | Yes | Datacenter | No | 7 | No |
| ||||||||||
FAS Series [1][2][3] | NAS | NetApp Plug-in 2.0.1 for Symantec NetBackup | Clustered Data ONTAP 8.2.3
Clustered Data ONTAP 8.2.4 Clustered Data ONTAP 8.3 Clustered Data ONTAP 8.3.1 Clustered Data ONTAP 8.3.2 OnCommand Unified Manager 6.2 OnCommand Unified Manager 6.3 OnCommand Unified Manager 6.4 See the Replication Director Vendor Links table for more information. | Array-based_Restore
Snapshot_Mgmt_FS Snapshot_Repl_FS Snapshot_Mgmt_Oracle_NFS Snapshot_Repl_Oracle_NFS Snapshot_Mgmt_VMware_NFS Snapshot_Repl_VMware_NFS Snapshot_Mgmt_VMware_Exchange_NFS Snapshot_Repl_VMware_Exchange_NFS Snapshot_Mgmt_VMware_SQL_NFS Snapshot_Repl_VMware_SQL_NFS | Yes | Yes | Datacenter | Datacenter | 7 | No |
| ||||||||||
FAS Series | NAS | NetApp Plug-in 2.0.1 for Symantec NetBackup | ONTAP 9.0
OnCommand Unified Manager 6.4P2 and later OnCommand Unified Manager 7.0 OnCommand Unified Manager 7.1 See the Replication Director Vendor Links table for more information. | Array-based_Restore
Snapshot_Mgmt_FS Snapshot_Repl_FS Snapshot_Mgmt_Oracle_NFS Snapshot_Repl_Oracle_NFS Snapshot_Mgmt_VMware_NFS Snapshot_Repl_VMware_NFS Snapshot_Mgmt_VMware_Exchange_NFS Snapshot_Repl_VMware_Exchange_NFS Snapshot_Mgmt_VMware_SQL_NFS Snapshot_Repl_VMware_SQL_NFS | Yes | Yes | Datacenter [4] | Datacenter [4] | 7 | No |
| ||||||||||
FAS Series | NAS | NetApp Plug-in 2.0.1 for Symantec NetBackup | ONTAP 9.1
OnCommand Unified Manager 7.0 OnCommand Unified Manager 7.1 See the Replication Director Vendor Links table for more information. | Array-based_Restore
Snapshot_Mgmt_FS Snapshot_Repl_FS Snapshot_Mgmt_Oracle_NFS Snapshot_Repl_Oracle_NFS Snapshot_Mgmt_VMware_NFS Snapshot_Repl_VMware_NFS Snapshot_Mgmt_VMware_Exchange_NFS Snapshot_Repl_VMware_Exchange_NFS Snapshot_Mgmt_VMware_SQL_NFS Snapshot_Repl_VMware_SQL_NFS | Yes | Yes | Datacenter [4] | Datacenter [4] | 7 | No |
| ||||||||||
AFF and FAS Series | NAS | NetApp Plug-in 2.0.1 for Symantec NetBackup | ONTAP 9.2
ONTAP 9.3 OnCommand Unified Manager 7.2 OnCommand Unified Manager 7.3 See the Replication Director Vendor Links table for more information. | Array-based_Restore
Snapshot_Mgmt_FS Snapshot_Repl_FS Snapshot_Mgmt_Oracle_NFS Snapshot_Repl_Oracle_NFS Snapshot_Mgmt_VMware_NFS Snapshot_Repl_VMware_NFS Snapshot_Mgmt_VMware_Exchange_NFS Snapshot_Repl_VMware_Exchange_NFS Snapshot_Mgmt_VMware_SQL_NFS Snapshot_Repl_VMware_SQL_NFS | Yes | Yes | Datacenter [4] | Datacenter [4] | 7 | No |
| ||||||||||
AFF and FAS Series | NAS | NetApp Plug-in 2.0.1 for Symantec NetBackup | ONTAP 9.4
ONTAP 9.5 OnCommand Unified Manager 9.4 OnCommand Unified Manager 9.5 See the Replication Director Vendor Links table for more information. | Array-based_Restore
Snapshot_Mgmt_FS Snapshot_Repl_FS Snapshot_Mgmt_Oracle_NFS Snapshot_Repl_Oracle_NFS Snapshot_Mgmt_VMware_NFS Snapshot_Repl_VMware_NFS Snapshot_Mgmt_VMware_Exchange_NFS Snapshot_Repl_VMware_Exchange_NFS Snapshot_Mgmt_VMware_SQL_NFS Snapshot_Repl_VMware_SQL_NFS | Yes | Yes | Datacenter [4] | Datacenter [4] | 7 | 12 |
| ||||||||||
AFF and FAS Series | NAS | NetApp Plug-in 2.0.1 for Symantec NetBackup | ONTAP 9.6
ONTAP 9.7 ActiveIQ Unified Manager 9.6 ActiveIQ Unified Manager 9.7 See the Replication Director Vendor Links table for more information. | Array-based_Restore
Snapshot_Mgmt_FS Snapshot_Repl_FS Snapshot_Mgmt_Oracle_NFS Snapshot_Repl_Oracle_NFS Snapshot_Mgmt_VMware_NFS Snapshot_Repl_VMware_NFS Snapshot_Mgmt_VMware_Exchange_NFS Snapshot_Repl_VMware_Exchange_NFS Snapshot_Mgmt_VMware_SQL_NFS Snapshot_Repl_VMware_SQL_NFS | Yes | Yes | Datacenter [4] | Datacenter [4] | 7 | 12 |
|
- Requires Clustered Data ONTAP version 8.2.3P4 or later.
- Requires OnCommand Unified Manager version 6.2P2 or later.
- Support for NDMP live browse requires Clustered Data ONTAP 8.3 or later.
- Fully-qualified domain names are not supported with NFS-attached datastores on VMware.
NetApp - Support with UNIX
Storage Family | Attachment Method | NetBackup Version Containing Plug-in or Vendor-Supplied Plug-in Version | Compatible Vendor Software | Supported Functionality | NetBackup Client Support | NetBackup Media Server Support | Solaris on SPARC |
---|---|---|---|---|---|---|---|
FAS Series [1][2][3] | NAS | NetApp Plug-in 2.0 for Symantec NetBackup | Clustered Data ONTAP 8.2.3
Clustered Data ONTAP 8.2.4 Clustered Data ONTAP 8.3 Clustered Data ONTAP 8.3.1 Clustered Data ONTAP 8.3.2 OnCommand Unified Manager 6.2 OnCommand Unified Manager 6.3 OnCommand Unified Manager 6.4 See the Replication Director Vendor Links table for more information. | Array-based_Restore
Snapshot_Mgmt_FS Snapshot_Repl_FS Snapshot_Mgmt_Oracle_NFS Snapshot_Repl_Oracle_NFS | Yes | No | 11 [4] |
| |||||||
FAS Series [1][2][3] | NAS | NetApp Plug-in 2.0.1 for Symantec NetBackup | Clustered Data ONTAP 8.2.3
Clustered Data ONTAP 8.2.4 Clustered Data ONTAP 8.3 Clustered Data ONTAP 8.3.1 Clustered Data ONTAP 8.3.2 OnCommand Unified Manager 6.2 OnCommand Unified Manager 6.3 OnCommand Unified Manager 6.4 See the Replication Director Vendor Links table for more information. | Array-based_Restore
Snapshot_Mgmt_FS Snapshot_Repl_FS Snapshot_Mgmt_Oracle_NFS Snapshot_Repl_Oracle_NFS | Yes | No | 11 [4] |
|
Snapshot Client
This section contains Snapshot Client compatibility information for Veritas NetBackup 10.0 - 10.x.x. It covers NetBackup Server (which includes Enterprise Server and Server), Client, and Snapshot Client.
Veritas supports standard unaltered kernel/Operating System levels. Should an issue arise on a revised kernel, Operating System, or virtual system environment, Veritas support may request the recreation of the problem with the standard operating environment distribution.
Veritas InfoScale / Storage Foundation Compatibility
Veritas InfoScale/Storage Foundation file system and volume manager are supported as the Snapshot Client stack based on Operating System requirements of the InfoScale/Storage Foundation product. For specific OS compatibility information regarding InfoScale/Storage Foundation, please see "Veritas Services and Operations Readiness Tools (SORT)".
FlashBackup policy limitation: The NetBackup FlashBackup policy is not supported on Veritas File System (VxFS) layout versions 8 and beyond, versions 7 and earlier are supported.
Third-Party Products
When a problem may be related to product(s) from a third-party vendor with whom Veritas has a cooperative or collaborative relationship on such product(s), then Veritas will work with that vendor in an attempt to resolve the problem, but resolution is not guaranteed. When Veritas does not have such a support relationship in place with the third-party vendor, or when the vendor ceases to support such product(s), then our ability to support Veritas Licensed Software operating with such vendor's product(s) may be limited, affected, or prevented (and such third party product(s) may cease to be part of Veritas-supported configuration(s)). Veritas support may be limited by the hardware or software vendor due to their support lifecycle. Should a vendor announce End of Support for a product, Veritas support may be limited.
Oracle Agent Support
Oracle ASM Environment is not supported.
Snapshot Client - Considerations
Subject | Notes |
---|---|
Support assumptions |
For details on supported operating systems, please refer to the "NetBackup 10.0 - 10.x.x Operating System Software Compatibility List".
1. Where support is shown for "Windows Server 2012 Datacenter" it also means that the other editions of Windows Server 2012, Windows Storage Server 2012, Windows Server 2012 R2, and Windows Storage Server 2012 R2 are supported. 2. Where support is shown for "Windows Server 2016 Datacenter" it also means that the other editions of Windows Server 2016 and Windows Storage Server 2016 are supported. 3. Where support is shown for "Windows Server 2019 Datacenter" it also means that the other editions of Windows Server 2019 are supported. 4. SUSE Linux Enterprise Server 12 support requires SP3 or later. |
Snapshot Client - Vendor Compatibility
Microsoft Volume Shadow Copy Service (Microsoft VSS) | Array-based Snapshot Methods | Software-based Snapshot Methods
Microsoft Volume Shadow Copy Service (Microsoft VSS)
Snapshot Client - VSS Snapshot Providers Support for Microsoft Windows Considerations
Subject | Notes |
---|---|
Support assumptions |
- Array vendor tables have been removed from this section as Veritas NetBackup has an open support policy for Microsoft Volume Shadow Copy Service (VSS) snapshots.
- Support is implied if an array vendor supplies and actively supports a VSS provider, or when using a Veritas InfoScale/Storage Foundation VxVM provider, or when using the Microsoft Default System provider. - Support includes Local, Alternate Client, FlashBackup-Windows Local, and FlashBackup-Windows Alternate Client snapshot methods. - Support extends to NetBackup application agents, Windows virtual machines using VMware RDM disks or Hyper-V Pass-Thru disks, and NetBackup for Hyper-V backups of VM snapshots. - Snapshot roll back (Snapshot Client Instant Recovery) is not supported, use the copy back method instead. - Consult with your array vendor on VSS provider availability. |
Array-based Snapshot Methods
Dell EMC
Symmetrix
DMX
DMX series family membership
Array Family | Members |
---|---|
Symmetrix DMX series | Symmetrix DMX 1000, Symmetrix DMX 2000, Symmetrix DMX 3000, Symmetrix DMX 800, Symmetrix DMX-3, Symmetrix DMX-4 |
Oracle Solaris 10 SPARC
Storage Family | Snapshot Type | Software | NetBackup Agent | Snapshot Method | File System / Volume Manager |
---|---|---|---|---|---|
Symmetrix DMX series | Dell EMC TimeFinder Snap | Dell EMC Solution Enabler | File System Oracle Agent DB2 Agent | Local Snapshot Local Snapshot with Instant Recovery Alternate Client Alternate Client with Instant Recovery |
RAW / VxVM VxFS / VxVM |
Symmetrix DMX series | Dell EMC TimeFinder Clone | Dell EMC Solution Enabler | File System Oracle Agent DB2 Agent | Local Snapshot Local Snapshot with Instant Recovery Alternate Client Alternate Client with Instant Recovery |
RAW / VxVM VxFS / VxVM |
Symmetrix DMX series | Dell EMC TimeFinder Mirror | Dell EMC Solution Enabler | File System Oracle Agent DB2 Agent | Local Snapshot Local Snapshot with Instant Recovery Alternate Client Alternate Client with Instant Recovery |
RAW / VxVM VxFS / VxVM |
VMAX
VMAX series family membership
Array Family | Members |
---|---|
Symmetrix VMAX series | Symmetrix VMAX, Symmetrix VMAXe |
Oracle Solaris 10 SPARC
Storage Family | Snapshot Type | Software | NetBackup Agent | Snapshot Method | File System / Volume Manager |
---|---|---|---|---|---|
Symmetrix VMAX series | Dell EMC TimeFinder Snap | Dell EMC Solution Enabler | File System | Local Snapshot Local Snapshot with Instant Recovery Alternate Client Alternate Client with Instant Recovery | VxFS / VxVM |
Symmetrix VMAX series | Dell EMC TimeFinder Clone | Dell EMC Solution Enabler | File System | Local Snapshot Local Snapshot with Instant Recovery Alternate Client Alternate Client with Instant Recovery | VxFS / VxVM |
Symmetrix VMAX series | Dell EMC TimeFinder Mirror | Dell EMC Solution Enabler | File System | Local Snapshot Local Snapshot with Instant Recovery Alternate Client Alternate Client with Instant Recovery | VxFS / VxVM |
Hitachi Vantara
AMS2000
AMS2000 series family membership
Array Family | Members |
---|---|
AMS2000 series | AMS2100, AMS2300, AMS2500 |
Oracle Solaris 10 SPARC
Storage Family | Snapshot Type | Software | NetBackup Agent | Snapshot Method | File System / Volume Manager |
---|---|---|---|---|---|
AMS2000 series | Hitachi_CopyOnWrite | Hitachi RAID Manager | File System | Local Snapshot Local Snapshot with Instant Recovery Alternate Client Alternate Client with Instant Recovery | RAW / VxVM VxFS / VxVM UFS / none |
AMS2000 series | Hitachi_ShadowImage | Hitachi RAID Manager | File System Oracle Agent SAP Oracle Agent | Local Snapshot Local Snapshot with Instant Recovery Alternate Client Alternate Client with Instant Recovery | RAW / VxVM VxFS / VxVM UFS / none |
Hewlett Packard Enterprise
EVA6400/8400
EVA6400/8400 series family membership
Array Family | Members |
---|---|
EVA6400/8400 series | EVA6400, EVA8400 |
Oracle Solaris 10 SPARC
Storage Family | Snapshot Type | Software | NetBackup Agent | Snapshot Method | File System / Volume Manager |
---|---|---|---|---|---|
EVA6400/8400 series | HPE EVA Snapclone | HPE Storage System Scripting Utility | File System | Local Snapshot Alternate Client | Raw / None UFS / None |
EVA6400/8400 series | HPE EVA Snapshot | HPE Storage System Scripting Utility | File System | Local Snapshot Alternate Client | Raw / None UFS / None |
EVA6400/8400 series | HPE EVA Vsnap | HPE Storage System Scripting Utility | File System | Local Snapshot Alternate Client | Raw / None UFS / None |
Software-based Snapshot Methods
Veritas Storage Foundation 6
Red Hat Enterprise Linux 7
Snapshot Type | Software | NetBackup Agent | Snapshot Method | File System / Volume Manager |
---|---|---|---|---|
vxvm | Veritas Storage Foundation | File System | Local Snapshot Local Snapshot with Instant Recovery | RAW / VxVM VxFS / VxVM |
SUSE Linux Enterprise Server 12
Snapshot Type | Software | NetBackup Agent | Snapshot Method | File System / Volume Manager |
---|---|---|---|---|
FlashSnap | Veritas Storage Foundation | File System | Alternate Client Alternate Client with Instant Recovery | RAW / VxVM VxFS / VxVM |
vxvm | Veritas Storage Foundation | File System | Local Snapshot Local Snapshot with Instant Recovery | RAW / VxVM VxFS / VxVM |
Oracle Solaris 10 SPARC
Snapshot Type | Software | NetBackup Agent | Snapshot Method | File System / Volume Manager |
---|---|---|---|---|
BLIB [1] | Veritas Storage Foundation | DB2 Agent Oracle Agent SAP Oracle Agent | Local Snapshot | VxFS / none VxFS / VxVM |
| ||||
FlashSnap | Veritas Storage Foundation | File System | FlashBackup Local Snapshot | UFS / VxVM VxFS / VxVM |
FlashSnap | Veritas Storage Foundation | File System DB2 Agent Oracle Agent SAP Oracle Agent | Alternate Client Alternate Client with Instant Recovery | RAW / VxVM UFS / VxVM VxFS / VxVM |
nbu_snap | N/A | File System | FlashBackup Local Snapshot | UFS / none UFS / VxVM VxFS / none VxFS / VxVM |
nbu_snap | N/A | File System Oracle Agent SAP Oracle Agent | Local Snapshot | Raw / none UFS / none UFS / VxVM VxFS / none VxFS / VxVM |
VVR | Veritas Storage Foundation | File System | FlashBackup Local Snapshot | UFS / VxVM VxFS / VxVM |
VVR | Veritas Storage Foundation | File System DB2 Agent Oracle Agent SAP Oracle Agent | Alternate Client Alternate Client with Instant Recovery | RAW / VxVM UFS / VxVM VxFS / VxVM |
VxFS_Snapshot | Veritas Storage Foundation | File System | FlashBackup Local Snapshot | VxFS / none VxFS / VxVM |
VxFS_Checkpoint | Veritas Storage Foundation | File System DB2 Agent Oracle Agent SAP Oracle Agent | Local Snapshot Local Snapshot with Instant Recovery | VxFS / none VxFS / VxVM |
vxvm | Veritas Storage Foundation | File System | FlashBackup Local Snapshot | UFS / VxVM VxFS / VxVM |
vxvm | Veritas Storage Foundation | File System DB2 Agent Oracle Agent SAP Oracle Agent | Local Snapshot Local Snapshot with Instant Recovery | RAW / VxVM UFS / VxVM VxFS / VxVM |
- Block-Level Incremental Backup. BLIB is not configured as a snapshot; but as a separate option in the policy. For more information, see the "NetBackup Administrator's Guide".
NetBackup for Kubernetes
For support with NetBackup for Kubernetes, the solution must be listed in the Container Storage Interface (CSI) driver here: Kubernetes Container Storage Interface (CSI) Documentation
Supported on x86-64 architecture Kubernetes nodes only.
Prior to NetBackup 10.1.1
To support snapshot operations, the solution's CSI driver must list Snapshot in the Other Features column and must support apiVersion: snapshot.storage.k8s.io/v1
To support Backup from snapshot operation, the solution's CSI driver must list Raw Block and Snapshot in the Other Features column.
NetBackup 10.1.1 and onwards
NetBackup supports both Block and File mode volumes for Snapshot and Backup from snapshot operations. The solution’s CSI driver must list Snapshot in the Other Features column, and must support apiVersion: snapshot.storage.k8s.io/v1
For more information on supported Kubernetes distributions, see the NetBackup Enterprise Server and Server 10.0 - 10.x.x OS Software Compatibility List.
For more information on configuring Kubernetes with NetBackup, see the NetBackup Web UI Kubernetes Administrator's Guide.
Supported Storage Vendors:
- Dell EMC
- Google Compute Engine
- Hitachi Vantara
- Hewlett Packard Enterprise
- IBM / Red Hat
- Infinidat
- NetApp
- Nexenta
- Nutanix
- Portworx
- Pure Storage
- Veritas
- VMware
- Zadara
Cloud Storage Solutions
NetBackup Cloud Storage plug-ins enable Veritas NetBackup to access Cloud Storage Solutions. Either the storage vendor or Veritas provides a software plug-in, which is installed on each NetBackup Media Server that is connected to the cloud solution.
NetBackup Cloud support information is listed in the tables below, organized by vendor. These tables provide information on supported versions of plug-ins and functionality, and other important notes about the hardware and its compatibility.
Cloud Storage - Considerations | Cloud Storage - Supported Cloud Technology Methods | Support for Workloads with Image Sharing in Cloud | Cloud Storage - Vendor Compatibility
Cloud Storage - Considerations
Subject | Notes |
---|---|
Support assumptions |
For details on supported operating systems, please refer to the "NetBackup 10.0 - 10.x.x Operating System Software Compatibility List".
1. In the vendor compatibility tables below, the column "NetBackup Version Containing Plug-in" indicates the NetBackup version (10.0 or later) at which that cloud storage solution was first supported. 2. Community-distributed Ceph solutions are supported when using the Red Hat string. Since these solutions rely on the community, support for any issues encountered may be delayed or unavailable, depending on the nature of the issue. 3. NetBackup supports AWS Outposts. For more information, please refer Veritas Tested and Validated for AWS Outposts |
Configuration considerations |
1. NetBackup is configured to trust a number of well-known public Certificate Authorities (CA) related to Cloud storage.
However, there are instances where, for internal purposes, you may need to add your own self-signed CA certificate.
For information on adding a self-signed CA certificate, please refer to "Cloud Storage Configuration: How To Add a Self-Signed CA Certificate".
2. NetBackup-provided Cloud connectors are not supported with IPv6, unless noted otherwise. Configuring these plug-ins with IPv6 may result in unpredictable behavior. |
Cloud Storage - Supported Cloud Technology Methods
NetBackup supports Cloud-based storage providers using a variety of technology methods, described below.
S3 Storage
This method uses the NetBackup S3 Cloud Connector, a plug-in included with NetBackup. For more information on configuring S3 solutions, see "About the Amazon S3 cloud storage API type".
Storage solutions using the NetBackup S3 Cloud Connector support the following functionality, unless noted otherwise:
NetBackup S3 Cloud Connector - Supported Functionality
Supported Functionality | Notes |
---|---|
Accelerator (for files and folders) | Supported unless noted otherwise. |
Accelerator with VMware-type policies | Supported unless noted otherwise. |
CloudCatalyst |
CloudCatalyst was deprecated in favor of MSDP Direct Cloud Tiering in NetBackup 8.3, and has been removed from NetBackup 9.0 and later versions.
Back-level media servers running CloudCatalyst are supported with a NetBackup 9.0 or later primary server. |
Compression | |
External Key Management Services (EKMS) | External Key Management Services can be used to encrypt backups to cloud targets. For a list of supported EKMS, see the "External Key Management Services using KMIP" section of this document. |
MSDP Direct Cloud Tiering | MSDP Direct Cloud Tiering supports storing data directly to cloud targets with deduplication.
One MSDP cloud storage server can support both local storage and multiple cloud storage targets.
NetBackup Media Servers running NetBackup 8.3 or later on Red Hat or CentOS can be configured as MSDP cloud storage servers. NetBackup Media Servers running NetBackup 10.3 or later on SUSE Linux Enterprise Server (SLES) can be configured as MSDP cloud storage servers. These features are not supported on SLES. - Image sharing - Malware scanning - Universal share - Universal share accelerator - Instant access - S3 interface for MSDP NetBackup Appliances running NetBackup Appliance 3.3 or later can be configured as MSDP cloud storage servers. |
NetBackup Encryption Key Management Service | NetBackup KMS can be used to encrypt backups to cloud targets. |
Optimized Synthetics | Storage Lifecycle Policies are not supported in policies that use the multiple copy synthetic backups method. For details, see "Storage lifecycle policies are not supported in policies that use the multiple copy synthetic backups method". |
S3 Object Lock (immutable storage) | NetBackup 9.1 and later support immutable (WORM) cloud storage. For more information on configuring S3 Object Lock, "About MSDP cloud immutable (WORM) storage support"in the Veritas NetBackup Deduplication Guide. |
Microsoft Azure Storage
This method uses the NetBackup Azure Cloud Connector, a plug-in included with NetBackup. For more information on configuring Microsoft Azure solutions, see "About Microsoft Azure cloud storage API type".
Storage solutions using the NetBackup Azure Cloud Connector support the following functionality, unless noted otherwise:
NetBackup Azure Cloud Connector - Supported Functionality
Supported Functionality | Notes |
---|---|
Accelerator (for files and folders) | Supported unless noted otherwise. |
Accelerator with VMware-type policies | Supported unless noted otherwise. |
CloudCatalyst |
CloudCatalyst was deprecated in favor of MSDP Direct Cloud Tiering in NetBackup 8.3, and has been removed from NetBackup 9.0 and later versions.
Back-level media servers running CloudCatalyst are supported with a NetBackup 9.0 or later primary server. |
Compression | |
External Key Management Services (EKMS) | External Key Management Services can be used to encrypt backups to cloud targets. For a list of supported EKMS, see the "External Key Management Services using KMIP" section of this document. |
MSDP Direct Cloud Tiering | MSDP Direct Cloud Tiering supports storing data directly to cloud targets with deduplication.
One MSDP cloud storage server can support both local storage and multiple cloud storage targets.
NetBackup Media Servers running NetBackup 8.3 or later on Red Hat or CentOS can be configured as MSDP cloud storage servers. NetBackup Media Servers running NetBackup 10.3 or later on SUSE Linux Enterprise Server (SLES) can be configured as MSDP cloud storage servers. These features are not supported on SLES. - Image sharing - Malware scanning - Universal share - Universal share accelerator - Instant access - S3 interface for MSDP NetBackup Appliances running NetBackup Appliance 3.3 or later can be configured as MSDP cloud storage servers. |
NetBackup Encryption Key Management Service | NetBackup KMS can be used to encrypt backups to cloud targets. |
Optimized Synthetics | Storage Lifecycle Policies are not supported in policies that use the multiple copy synthetic backups method. For details, see "Storage lifecycle policies are not supported in policies that use the multiple copy synthetic backups method". |
OST
This method uses a third-party OpenStorage Technology plug-in, provided by the storage vendor and certified by Veritas.
For a list of functionality supported with an OST plug-in, see the Vendor Compatibility table for that solution.
Advanced Disk Targets
This method uses third-party hardware or software to make the cloud appear as an AdvancedDisk storage unit to NetBackup.
For more information on AdvancedDisk solutions, see "NetBackup AdvancedDisk Storage Solutions Guide".
VTL
This method uses third-party software to present the Cloud as if it were a VTL (Virtual Tape Library) to NetBackup.
For a list of functionality supported with VTLs, see the Virtual Tape Libraries section of this HCL.
Support for Workloads with Image Sharing in Cloud
Image Sharing in Cloud is supported with MSDP Direct Cloud Tiering. Workload support is listed in the tables below.
Support for Image Sharing using MSDP Direct Cloud Tiering
Image sharing using MSDP Direct Cloud Tiering is supported with any of the S3 cloud providers listed in the Vendor Compatibility tables below, and with Microsoft Azure Blob storage.
MSDP Direct Cloud Tiering is supported with NetBackup 8.3 and later.
For more information on image sharing using MSDP Direct Cloud Tiering, see "About Image Sharing using MSDP cloud".
Image Sharing in Cloud - Supported Workloads
Workload | NetBackup 10.0 (or later) Start of Support | Notes |
---|---|---|
Basic backups of files and folders | 10.0 | |
Bare Metal Restore (BMR) | Not supported | Duplication of images is supported. Restores can be done from another NetBackup media server. |
DB2 | 10.0 | |
Enterprise Vault | 10.0 | |
Hadoop | 10.0 | |
Hbase | 10.0 | |
Hyper-V | 10.0 | |
Informix | 10.0 | |
Lotus Notes | 10.0 | |
MariaDB | 10.0 | |
Microsoft Exchange Server | 10.0 | |
Microsoft SharePoint | 10.0 | |
Microsoft SQL Server | 10.0 | |
MySQL | 10.0 | |
NDMP | 10.0 | |
Nutanix | Not supported | Duplication of images is supported. Restores can be done from another NetBackup media server. |
OpenStack | Not supported | Duplication of images is supported. Restores can be done from another NetBackup media server. |
Oracle | 10.0 | |
Postgres | 10.0 | |
RHV | 10.0 | |
SAP | Not supported | Duplication of images is supported. Restores can be done from another NetBackup media server. |
Sybase | 10.0 | |
VMware | 10.0 | |
Cloud Storage - Vendor Compatibility
ACP | Alibaba | Amazon | Anzen | AT&T | Backblaze | Beijing XSKY | Calamu | China Mobile | China Telecom | Chunghwa Telecom | Cloudian | DataCore | Dell EMC | Dell EMC Isilon | Deutsche Telekom | Fujitsu | Google | Hewlett Packard Enterprise | Hitachi Vantara | IBM | Impossible Cloud | Infoniqa | Iron Mountain | iTernity | Microsoft | NEC | NetApp | NooBaa | Nutanix | Oracle | Orange Business Services | OVHcloud | PSPACE | Pure Storage | Quantum | SandStone | Scality | Seagate | Spectra Logic | STACKIT | SUSE | SwiftStack | Tencent | VAST Data | Veritas | Wasabi
ACP
Cloud Storage Solution | NetBackup Version Containing Plug-in or Vendor-Supplied Plug-in Version | IPv6 | Locales / Regions | Notes |
---|---|---|---|---|
CS3 | NetBackup 10.0 and later S3 connector | No | All Locales | Also supported with NetBackup Appliance 5.0 and later S3 connector. CloudCatalyst: Supported with back-level media servers only. MSDP Direct Cloud Tiering: Yes S3 Object Lock: No Secure Socket Layer (SSL): Yes Server-side encryption: No URL style: Path Vendor site: http://www.acpcloud.rocks/ |
Alibaba
Cloud Storage Solution | NetBackup Version Containing Plug-in or Vendor-Supplied Plug-in Version | IPv6 | Locales / Regions | Notes |
---|---|---|---|---|
Cloud Object Storage Service (OSS) | NetBackup 10.0 and later S3 connector | No | Asia Pacific NE 1 (Tokyo), Asia Pacific SE 1 (Singapore), Asia Pacific SE 2 (Sydney), Asia Pacific SE 3 (Kuala Lumpur), Asia Pacific SE 5 (Jakarta), Asia Pacific SOU 1 (Mumbai), China East 1 (Hangzhou), China East 2 (Shanghai), China North 1 (Qingdao), China North 2 (Beijing), China North 3 (Zhangjiakou), China North 5 (Hohhot), China South 1 (Shenzhen), Germany 1 (Frankfurt), Hong Kong, Middle East 1 (Dubai), US East 1 (Virginia), US West 1 (Silicon Valley) | Also supported with NetBackup Appliance 5.0 and later S3 connector. CloudCatalyst: Supported with back-level media servers only. MSDP Direct Cloud Tiering: Yes S3 Object Lock: No Secure Socket Layer (SSL): Yes Server-side encryption: No URL style: Virtual Hosted Vendor site: https://www.alibabacloud.com/product/oss/ |
Amazon
Cloud Storage Solution | NetBackup Version Containing Plug-in or Vendor-Supplied Plug-in Version | IPv6 | Locales / Regions | Notes |
---|---|---|---|---|
Glacier | NetBackup 10.0 and later S3 connector | No | Africa (Cape Town), Asia Pacific (Hong Kong), Asia Pacific (Hyderabad), Asia Pacific (Jakarta), Asia Pacific (Malaysia), Asia Pacific (Melbourne), Asia Pacific (Mumbai), Asia Pacific (Osaka), Asia Pacific (Seoul), Asia Pacific (Singapore), Asia Pacific (Sydney), Asia Pacific (Thailand), Asia Pacific (Tokyo), Canada (Central), Canada West (Calgary), China (Beijing), China (Ningxia), Europe (Frankfurt), Europe (Ireland), Europe (London), Europe (Milan), Europe (Paris), Europe (Spain), Europe (Stockholm), Europe (Zurich), Israel (Tel Aviv), Mexico (Central), Middle East (Bahrain), Middle East (UAE), South America (Sao Paulo), US East (N. Virginia FIPS 140-2), US East (N. Virginia), US East (Ohio FIPS 140-2), US East (Ohio), US West (N. California FIPS 140-2), US West (N. California), US West (Oregon FIPS 140-2), US West (Oregon) | Also supported with NetBackup Appliance 5.0 and later S3 connector. AWS PrivateLink connectivity is supported with MSDP Direct Cloud Tiering with S3 Object Lock. CloudCatalyst: Supported with back-level media servers only. MSDP Direct Cloud Tiering: Yes, S3 replication is not supported NetBackup Accelerator (for files and folders): No NetBackup Accelerator with VMware: No NetBackup supports Amazon Glacier standard retrieval policies, which complete within 3 to 5 hours. Veritas recommends setting the retrieval retention period to a minimum of 3 days. S3 Object Lock: Yes Secure Socket Layer (SSL): Yes Server-side encryption: Yes. Supports AES256. Support for the Asia Pacific (Jakarta) region requires Cloud Configuration Package version 2.9.1 or later. URL style: Virtual Hosted (default), Path Vendor site: https://aws.amazon.com/glacier/ |
Glacier Deep Archive | NetBackup 10.0 and later S3 connector | No | Africa (Cape Town), Asia Pacific (Hong Kong), Asia Pacific (Hyderabad), Asia Pacific (Jakarta), Asia Pacific (Malaysia), Asia Pacific (Melbourne), Asia Pacific (Mumbai), Asia Pacific (Osaka), Asia Pacific (Seoul), Asia Pacific (Singapore), Asia Pacific (Sydney), Asia Pacific (Thailand), Asia Pacific (Tokyo), Canada (Central), Canada West (Calgary), China (Beijing), China (Ningxia), Europe (Frankfurt), Europe (Ireland), Europe (London), Europe (Milan), Europe (Paris), Europe (Spain), Europe (Stockholm), Europe (Zurich), Israel (Tel Aviv), Mexico (Central), Middle East (Bahrain), Middle East (UAE), South America (Sao Paulo), US East (N. Virginia FIPS 140-2), US East (N. Virginia), US East (Ohio FIPS 140-2), US East (Ohio), US West (N. California FIPS 140-2), US West (N. California), US West (Oregon FIPS 140-2), US West (Oregon) | Also supported with NetBackup Appliance 5.0 and later S3 connector. AWS PrivateLink connectivity is supported with MSDP Direct Cloud Tiering with S3 Object Lock. CloudCatalyst: Supported with back-level media servers only. MSDP Direct Cloud Tiering: Yes, S3 replication is not supported NetBackup Accelerator (for files and folders): No NetBackup Accelerator with VMware: No NetBackup supports Amazon Glacier Deep Archive standard retrieval policies. For more information on times required for retrieval, see Amazon's documentation for this storage class. Veritas recommends setting the retrieval retention period to a minimum of 3 days. S3 Object Lock: Yes Secure Socket Layer (SSL): Yes Server-side encryption: Yes. Supports AES256. Support for the Asia Pacific (Jakarta) region requires Cloud Configuration Package version 2.9.1 or later. URL style: Virtual Hosted (default), Path Vendor site: https://aws.amazon.com/s3/storage-classes/ |
Glacier Instant Retrieval (IR) | NetBackup 10.0 and later S3 connector | No | Africa (Cape Town), Asia Pacific (Hong Kong), Asia Pacific (Hyderabad), Asia Pacific (Jakarta), Asia Pacific (Malaysia), Asia Pacific (Melbourne), Asia Pacific (Mumbai), Asia Pacific (Osaka), Asia Pacific (Seoul), Asia Pacific (Singapore), Asia Pacific (Sydney), Asia Pacific (Thailand), Asia Pacific (Tokyo), Canada (Central), Canada West (Calgary), China (Beijing), China (Ningxia), Europe (Frankfurt), Europe (Ireland), Europe (London), Europe (Milan), Europe (Paris), Europe (Spain), Europe (Stockholm), Europe (Zurich), Israel (Tel Aviv), Mexico (Central), Middle East (Bahrain), Middle East (UAE), South America (Sao Paulo), US East (N. Virginia FIPS 140-2), US East (N. Virginia), US East (Ohio FIPS 140-2), US East (Ohio), US West (N. California FIPS 140-2), US West (N. California), US West (Oregon FIPS 140-2), US West (Oregon) | Also supported with NetBackup Appliance 5.0 and later S3 connector. AWS PrivateLink connectivity is supported with MSDP Direct Cloud Tiering with S3 Object Lock. CloudCatalyst: Supported with back-level media servers only. MSDP Direct Cloud Tiering: Yes, S3 replication is not supported. S3 Object Lock: Yes Secure Socket Layer (SSL): Yes Server-side encryption: Yes. Supports AES256. Support for the Asia Pacific (Jakarta) region requires Cloud Configuration Package version 2.9.1 or later. URL style: Virtual Hosted (default), Path Vendor site: https://aws.amazon.com/s3/storage-classes/glacier/instant-retrieval/ |
GovCloud - Glacier | NetBackup 10.0 and later S3 connector | No | US East1 (Gov FIPS 140-2), US East1 (Gov Non-FIPS), US West1 (Gov FIPS 140-2), US West1 (Gov Non-FIPS) | Also supported with NetBackup Appliance 5.0 and later S3 connector. AWS C2S is supported with this solution. AWS PrivateLink connectivity is supported with MSDP Direct Cloud Tiering with S3 Object Lock. CloudCatalyst: Supported with back-level media servers only. Only supported with the non-FIPS endpoints at this time. MSDP Direct Cloud Tiering: Yes. Only supported with the non-FIPS endpoints at this time. S3 replication is not supported. NetBackup Accelerator (for files and folders): No NetBackup Accelerator with VMware: No NetBackup supports Amazon Glacier standard retrieval policies, which complete within 3 to 5 hours. Veritas recommends setting the retrieval retention period to a minimum of 3 days. S3 Object Lock: Yes Secure Socket Layer (SSL): Yes Server-side encryption: Yes. Supports AES256. URL style: Virtual Hosted (default), Path Vendor site: http://aws.amazon.com/govcloud-us/ When configuring C2S through a CAP server, use a non-encrypted client key. |
GovCloud - Glacier Deep Archive | NetBackup 10.0 and later S3 connector | No | US East1 (Gov FIPS 140-2), US East1 (Gov Non-FIPS), US West1 (Gov FIPS 140-2), US West1 (Gov Non-FIPS) | Also supported with NetBackup Appliance 5.0 and later S3 connector. AWS C2S is supported with this solution. AWS PrivateLink connectivity is supported with MSDP Direct Cloud Tiering with S3 Object Lock. CloudCatalyst: Supported with back-level media servers only. Only supported with the non-FIPS endpoints at this time. MSDP Direct Cloud Tiering: Yes. Only supported with the non-FIPS endpoints at this time. S3 replication is not supported. NetBackup Accelerator (for files and folders): No NetBackup Accelerator with VMware: No NetBackup supports Amazon Glacier Deep Archive standard retrieval policies. For more information on times required for retrieval, see Amazon's documentation for this storage class. Veritas recommends setting the retrieval retention period to a minimum of 3 days. S3 Object Lock: Yes Secure Socket Layer (SSL): Yes Server-side encryption: Yes. Supports AES256. URL style: Virtual Hosted (default), Path Vendor site: http://aws.amazon.com/govcloud-us/ When configuring C2S through a CAP server, use a non-encrypted client key. |
GovCloud - Glacier Instant Retrieval (IR) | NetBackup 10.0 and later S3 connector | No | US East1 (Gov FIPS 140-2), US East1 (Gov Non-FIPS), US West1 (Gov FIPS 140-2), US West1 (Gov Non-FIPS) | Also supported with NetBackup Appliance 5.0 and later S3 connector. AWS C2S is supported with this solution. AWS PrivateLink connectivity is supported with MSDP Direct Cloud Tiering with S3 Object Lock. CloudCatalyst: Supported with back-level media servers only. Only supported with the non-FIPS endpoints at this time. MSDP Direct Cloud Tiering: Yes. Only supported with the non-FIPS endpoints at this time. S3 replication is not supported. S3 Object Lock: Yes Secure Socket Layer (SSL): Yes Server-side encryption: Yes. Supports AES256. URL style: Virtual Hosted (default), Path Vendor site: https://aws.amazon.com/s3/storage-classes/glacier/instant-retrieval/ When configuring C2S through a CAP server, use a non-encrypted client key. |
GovCloud Simple Storage Service | NetBackup 10.0 and later S3 connector | Yes | US East1 (Gov FIPS 140-2), US East1 (Gov Non-FIPS), US West1 (Gov FIPS 140-2), US West1 (Gov Non-FIPS) | Also supported with NetBackup Appliance 5.0 and later S3 connector. AWS C2S is supported with this solution. AWS PrivateLink connectivity is supported with MSDP Direct Cloud Tiering with S3 Object Lock. CloudCatalyst: Supported with back-level media servers only. Only supported with the non-FIPS endpoints at this time. MSDP Direct Cloud Tiering: Yes. Only supported with the non-FIPS endpoints at this time. S3 replication is not supported. S3 Object Lock: Yes Secure Socket Layer (SSL): Yes Server-side encryption: Yes. Supports AES256. URL style: Virtual Hosted (default), Path Vendor site: http://aws.amazon.com/govcloud-us/ When configuring C2S through a CAP server, use a non-encrypted client key. |
GovCloud Simple Storage Service - Infrequent Access (IA) | NetBackup 10.0 and later S3 connector | Yes | US East1 (Gov FIPS 140-2), US East1 (Gov Non-FIPS), US West1 (Gov FIPS 140-2), US West1 (Gov Non-FIPS) | Also supported with NetBackup Appliance 5.0 and later S3 connector. AWS C2S is supported with this solution. AWS PrivateLink connectivity is supported with MSDP Direct Cloud Tiering with S3 Object Lock. CloudCatalyst: Supported with back-level media servers only. Only supported with the non-FIPS endpoints at this time. MSDP Direct Cloud Tiering: Yes. Only supported with the non-FIPS endpoints at this time. S3 replication is not supported. S3 Object Lock: Yes Secure Socket Layer (SSL): Yes Server-side encryption: Yes. Supports AES256. URL style: Virtual Hosted (default), Path Vendor site: http://aws.amazon.com/govcloud-us/ When configuring C2S through a CAP server, use a non-encrypted client key. |
Simple Storage Service (S3) Standard | NetBackup 10.0 and later S3 connector | Yes | Africa (Cape Town), Asia Pacific (Hong Kong), Asia Pacific (Hyderabad), Asia Pacific (Jakarta), Asia Pacific (Malaysia), Asia Pacific (Melbourne), Asia Pacific (Mumbai), Asia Pacific (Osaka), Asia Pacific (Seoul), Asia Pacific (Singapore), Asia Pacific (Sydney), Asia Pacific (Thailand), Asia Pacific (Tokyo), Canada (Central), Canada West (Calgary), China (Beijing), China (Ningxia), Europe (Frankfurt), Europe (Ireland), Europe (London), Europe (Milan), Europe (Paris), Europe (Spain), Europe (Stockholm), Europe (Zurich), Israel (Tel Aviv), Mexico (Central), Middle East (Bahrain), Middle East (UAE), South America (Sao Paulo), US East (N. Virginia FIPS 140-2), US East (N. Virginia), US East (Ohio FIPS 140-2), US East (Ohio), US West (N. California FIPS 140-2), US West (N. California), US West (Oregon FIPS 140-2), US West (Oregon) | Also supported with NetBackup Appliance 5.0 and later S3 connector. Amazon Snowball and Amazon Snowball Edge are supported with the Standard storage class. For details, see the Protecting data with Amazon Snowball and Amazon Snowball Edge section of the Veritas NetBackup Cloud Administrator's Guide. AWS PrivateLink connectivity is supported with MSDP Direct Cloud Tiering with S3 Object Lock. CloudCatalyst: Supported with back-level media servers only. MSDP Direct Cloud Tiering: Yes, S3 replication is not supported. S3 Object Lock: Yes Secure Socket Layer (SSL): Yes Server-side encryption: Yes. Supports AES256. Support for the Asia Pacific (Jakarta) region requires Cloud Configuration Package version 2.9.1 or later. URL style: Virtual Hosted (default), Path Vendor site: http://aws.amazon.com/s3 |
Simple Storage Service (S3) Standard - Infrequent Access (IA) | NetBackup 10.0 and later S3 connector | Yes | Africa (Cape Town), Asia Pacific (Hong Kong), Asia Pacific (Hyderabad), Asia Pacific (Jakarta), Asia Pacific (Malaysia), Asia Pacific (Melbourne), Asia Pacific (Mumbai), Asia Pacific (Osaka), Asia Pacific (Seoul), Asia Pacific (Singapore), Asia Pacific (Sydney), Asia Pacific (Thailand), Asia Pacific (Tokyo), Canada (Central), Canada West (Calgary), China (Beijing), China (Ningxia), Europe (Frankfurt), Europe (Ireland), Europe (London), Europe (Milan), Europe (Paris), Europe (Spain), Europe (Stockholm), Europe (Zurich), Israel (Tel Aviv), Mexico (Central), Middle East (Bahrain), Middle East (UAE), South America (Sao Paulo), US East (N. Virginia FIPS 140-2), US East (N. Virginia), US East (Ohio FIPS 140-2), US East (Ohio), US West (N. California FIPS 140-2), US West (N. California), US West (Oregon FIPS 140-2), US West (Oregon) | Also supported with NetBackup Appliance 5.0 and later S3 connector. AWS PrivateLink connectivity is supported with MSDP Direct Cloud Tiering with S3 Object Lock. CloudCatalyst: Supported with back-level media servers only. MSDP Direct Cloud Tiering: Yes, S3 replication is not supported. S3 Object Lock: Yes Secure Socket Layer (SSL): Yes Server-side encryption: Yes. Supports AES256. Support for the Asia Pacific (Jakarta) region requires Cloud Configuration Package version 2.9.1 or later. URL style: Virtual Hosted (default), Path Vendor site: http://aws.amazon.com/s3 |
Simple Storage Service (S3) Standard - One Zone-Infrequent Access Storage | NetBackup 10.0 and later S3 connector | Yes | Africa (Cape Town), Asia Pacific (Hong Kong), Asia Pacific (Hyderabad), Asia Pacific (Jakarta), Asia Pacific (Malaysia), Asia Pacific (Melbourne), Asia Pacific (Mumbai), Asia Pacific (Osaka), Asia Pacific (Seoul), Asia Pacific (Singapore), Asia Pacific (Sydney), Asia Pacific (Thailand), Asia Pacific (Tokyo), Canada (Central), Canada West (Calgary), China (Beijing), China (Ningxia), Europe (Frankfurt), Europe (Ireland), Europe (London), Europe (Milan), Europe (Paris), Europe (Spain), Europe (Stockholm), Europe (Zurich), Israel (Tel Aviv), Mexico (Central), Middle East (Bahrain), Middle East (UAE), South America (Sao Paulo), US East (N. Virginia FIPS 140-2), US East (N. Virginia), US East (Ohio FIPS 140-2), US East (Ohio), US West (N. California FIPS 140-2), US West (N. California), US West (Oregon FIPS 140-2), US West (Oregon) | Also supported with NetBackup Appliance 5.0 and later S3 connector. AWS PrivateLink connectivity is supported with MSDP Direct Cloud Tiering with S3 Object Lock. CloudCatalyst: Supported with back-level media servers only. MSDP Direct Cloud Tiering: Yes, S3 replication is not supported. S3 Object Lock: Yes Secure Socket Layer (SSL): Yes Server-side encryption: Yes. Supports AES256. Support for the Asia Pacific (Jakarta) region requires Cloud Configuration Package version 2.9.1 or later. URL style: Virtual Hosted (default), Path Vendor site: http://aws.amazon.com/s3 |
Anzen
Cloud Storage Solution | NetBackup Version Containing Plug-in or Vendor-Supplied Plug-in Version | IPv6 | Locales / Regions | Notes |
---|---|---|---|---|
AnzenStore | NetBackup 10.1 and later S3 connector | No | All Locales, On-Premises | MSDP Direct Cloud Tiering: Yes
Requires NetBackup 10.1 or later, Cloud Configuration Package version 2.12.7 or later and Device Mappings Package version 1.180 or later. Supported from AnzenStore version 1.1.12 S3 Object Lock: No. Secure Socket Layer (SSL): Yes URL style: Path Vendor site: https://www.anzentechsystem.com/ |
AT&T
Cloud Storage Solution | NetBackup Version Containing Plug-in or Vendor-Supplied Plug-in Version | IPv6 | Locales / Regions | Notes |
---|---|---|---|---|
Cloud Storage | NetBackup 10.0 and later S3 connector | No | All Locales | Also supported with NetBackup Appliance 5.0 and later S3 connector. CloudCatalyst: Supported with back-level media servers only. MSDP Direct Cloud Tiering: Yes S3 Object Lock: No Secure Socket Layer (SSL): Yes Server-side encryption: Yes. Supports AES256. URL style: Virtual Hosted (default), Path Vendor site: http://www.att.com/cloud |
Backblaze
Cloud Storage Solution | NetBackup Version Containing Plug-in or Vendor-Supplied Plug-in Version | IPv6 | Locales / Regions | Notes |
---|---|---|---|---|
B2 Cloud Storage | NetBackup 10.1 and later S3 connector | No | EU-CENTRAL-003, US-EAST-005, US-WEST-000, US-WEST-001, US-WEST-002, US-WEST-004 | MSDP Direct Cloud Tiering: Yes
Requires NetBackup 10.1 or later and Cloud Configuration Package version 2.10.6 or later. S3 Object Lock: Yes, Requires NetBackup 10.1 or later and Cloud Configuration Package version 2.11.0 or later. Secure Socket Layer (SSL): Yes Server-side encryption: Yes. Supports AES256. URL style: Path Vendor site: https://www.backblaze.com/cloud-storage/integrations/veritas |
Beijing XSKY
Cloud Storage Solution | NetBackup Version Containing Plug-in or Vendor-Supplied Plug-in Version | IPv6 | Locales / Regions | Notes |
---|---|---|---|---|
Enterprise Object Storage | NetBackup 10.0 and later S3 connector | No | On-Premises | CloudCatalyst: Supported with back-level media servers only. MSDP Direct Cloud Tiering: Yes S3 Object Lock: Yes, Requires NetBackup 10.5 or later and Cloud Configuration Package version 2.12.6 or later. Secure Socket Layer (SSL): Yes Server-side encryption: No URL style: Path Vendor site: https://www.xsky.com/en/ |
Calamu
Cloud Storage Solution | NetBackup Version Containing Plug-in or Vendor-Supplied Plug-in Version | IPv6 | Locales / Regions | Notes |
---|---|---|---|---|
Calamu Protect | NetBackup 10.1 and later S3 connector | No | All Locales, On-Premises | MSDP Direct Cloud Tiering: Yes
Requires NetBackup 10.1 or later and Cloud Configuration Package version 2.12.1 or later. S3 Object Lock: No. Secure Socket Layer (SSL): Yes Server-side encryption: No. URL style: Path Vendor site: https://www.calamuprotect.com |
China Mobile
Cloud Storage Solution | NetBackup Version Containing Plug-in or Vendor-Supplied Plug-in Version | IPv6 | Locales / Regions | Notes |
---|---|---|---|---|
CMCC Cloud Storage | NetBackup 10.0 and later S3 connector | No | All Locales | Also supported with NetBackup Appliance 5.0 and later S3 connector. CloudCatalyst: Supported with back-level media servers only. MSDP Direct Cloud Tiering: Yes S3 Object Lock: No Secure Socket Layer (SSL): Yes Server-side encryption: No URL style: Path Vendor site: https://ecloud.10086.cn/ |
China Telecom
Cloud Storage Solution | NetBackup Version Containing Plug-in or Vendor-Supplied Plug-in Version | IPv6 | Locales / Regions | Notes |
---|---|---|---|---|
OOS | NetBackup 10.0 and later S3 connector | No | All Locales | Also supported with NetBackup Appliance 5.0 and later S3 connector. CloudCatalyst: Supported with back-level media servers only. MSDP Direct Cloud Tiering: Yes S3 Object Lock: No Secure Socket Layer (SSL): Yes Server-side encryption: No URL style: Path (default), Virtual Hosted Vendor site: http://www.ctyun.cn/ |
Chunghwa Telecom
Cloud Storage Solution | NetBackup Version Containing Plug-in or Vendor-Supplied Plug-in Version | IPv6 | Locales / Regions | Notes |
---|---|---|---|---|
Hicloud S3 | NetBackup 10.0 and later S3 connector | No | All Locales | Also supported with NetBackup Appliance 5.0 and later S3 connector. CloudCatalyst: Supported with back-level media servers only. MSDP Direct Cloud Tiering: Yes S3 Object Lock: No Secure Socket Layer (SSL): Yes Server-side encryption: No URL style: Virtual Hosted (default), Path Vendor site: http://hicloud.hinet.net/ |
Cloudian
Cloud Storage Solution | NetBackup Version Containing Plug-in or Vendor-Supplied Plug-in Version | IPv6 | Locales / Regions | Notes |
---|---|---|---|---|
HyperStore Object Storage | NetBackup 10.0 and later S3 connector | No | On-Premises | Also supported with NetBackup Appliance 5.0 and later S3 connector. CloudCatalyst: Supported with back-level media servers only. MSDP Direct Cloud Tiering: Yes S3 Object Lock: Yes. Requires NetBackup 10.0.0.1 or later and Cloud Configuration Package version 2.9.5 or later. Secure Socket Layer (SSL): Yes Server-side encryption: No URL style: Path Vendor site: http://www.cloudian.com/ |
DataCore
Cloud Storage Solution | NetBackup Version Containing Plug-in or Vendor-Supplied Plug-in Version | IPv6 | Locales / Regions | Notes |
---|---|---|---|---|
Swarm | NetBackup 10.1 and later S3 connector | No | On-Premises | MSDP Direct Cloud Tiering: Yes
Requires NetBackup 10.1 or later and Cloud Configuration Package version 2.10.5 or later. S3 Object Lock: Yes, requires NetBackup 10.3 or later. Secure Socket Layer (SSL): Yes Server-side encryption: No URL style: Path Vendor site: https://www.datacore.com/products/swarm-object-storage/ |
Dell EMC
Cloud Storage Solution | NetBackup Version Containing Plug-in or Vendor-Supplied Plug-in Version | IPv6 | Locales / Regions | Notes |
---|---|---|---|---|
Elastic Cloud Storage | NetBackup 10.0 and later S3 connector | No | All Locales, On-Premises | Also supported with NetBackup Appliance 5.0 and later S3 connector. CloudCatalyst: Supported with back-level media servers only. Creating a disk volume via the NetBackup Admin Console or CLI is not supported with this solution. Create the bucket outside of NetBackup using the cloud provider's interface. MSDP Direct Cloud Tiering: Yes S3 Object Lock: Yes, requires NetBackup 10.1 or later and ECS version 3.6.2 or later. Secure Socket Layer (SSL): Yes. SSL is supported with ECS version 3.1 and later. Server-side encryption: No URL style: Path Vendor site: http://www.emc.com/storage/ecs/index.htm |
Dell EMC Isilon
Cloud Storage Solution | NetBackup Version Containing Plug-in or Vendor-Supplied Plug-in Version | IPv6 | Locales / Regions | Notes |
---|---|---|---|---|
PowerScale series | NetBackup 10.0 and later S3 connector | No | On-Premises | Also supported with NetBackup Appliance 5.0 and later S3 connector. CloudCatalyst: Supported with back-level media servers only. Creating a disk volume via the NetBackup Admin Console or CLI is not supported with this solution. Create the bucket outside of NetBackup using the cloud provider's interface. MSDP Direct Cloud Tiering: Yes S3 Object Lock: No Secure Socket Layer (SSL): Yes Server-side encryption: No URL style: Path Vendor site: https://www.delltechnologies.com/en-us/storage/powerscale.htm |
Deutsche Telekom
Cloud Storage Solution | NetBackup Version Containing Plug-in or Vendor-Supplied Plug-in Version | IPv6 | Locales / Regions | Notes |
---|---|---|---|---|
Open Telekom Cloud | NetBackup 10.0 and later S3 connector | No | EU (Germany) | Also supported with NetBackup Appliance 5.0 and later S3 connector. CloudCatalyst: Supported with back-level media servers only. MSDP Direct Cloud Tiering: Yes S3 Object Lock: No Secure Socket Layer (SSL): Yes Server-side encryption: No URL style: Path (default), Virtual Hosted Vendor site: https://cloud.telekom.de/en/ |
Fujitsu
Cloud Storage Solution | NetBackup Version Containing Plug-in or Vendor-Supplied Plug-in Version | IPv6 | Locales / Regions | Notes |
---|---|---|---|---|
ETERNUS CD10000 | NetBackup 10.0 and later S3 connector | No | On-Premises | Also supported with NetBackup Appliance 5.0 and later S3 connector. CloudCatalyst: Supported with back-level media servers only. MSDP Direct Cloud Tiering: Yes S3 Object Lock: No Secure Socket Layer (SSL): Yes Server-side encryption: No URL style: Path Vendor site: http://www.fujitsu.com/global/products/computing/storage/eternus-cd/ |
ETERNUS CS8000 | NetBackup 10.1 and later S3 connector | No | On-Premises | MSDP Direct Cloud Tiering: Yes
Requires NetBackup 10.1 or later, Cloud Configuration Package version 2.12.11 or later and Device Mappings Package version 1.181 or later. S3 Object Lock: Yes, Requires NetBackup 10.5 or later. Secure Socket Layer (SSL): Yes. Server-side encryption: No. URL style: Path, Virtual Hosted. Vendor site: https://www.fujitsu.com/global/products/computing/storage/data-protection/cs8000/index.html |
Cloud Storage Solution | NetBackup Version Containing Plug-in or Vendor-Supplied Plug-in Version | IPv6 | Locales / Regions | Notes |
---|---|---|---|---|
Cloud Storage - Multi-Regional | NetBackup 10.0 and later S3 connector | No | Asia (Multi-Regional), EU (Multi-Regional), US (Multi-Regional) | Also supported with NetBackup Appliance 5.0 and later S3 connector. CloudCatalyst: Supported with back-level media servers only. Creating a disk volume via the NetBackup Admin Console or CLI is not supported with this solution. Create the bucket outside of NetBackup using the cloud provider's interface. MSDP Direct Cloud Tiering: Yes S3 Object Lock: Yes, requires NetBackup 10.4 or later. Secure Socket Layer (SSL): Yes Server-side encryption: No URL style: Virtual Hosted (default), Path Vendor site: https://cloud.google.com/about/locations/ |
Cloud Storage - Regional | NetBackup 10.0 and later S3 connector | No | Africa-South1, Asia-East1, Asia-East2, Asia-Northeast1, Asia-Northeast2, Asia-South1, Asia-South2, Asia-Southeast1, Australia-Southeast1, Australia-Southeast2, EU-North1, EU-North2, EU-Southwest1, EU-West1, EU-West10, EU-West12, EU-West2, EU-West3, EU-West4, EU-West6, EU-West8, EU-West9, ME-Central1, ME-Central2, ME-West1, NorthAmerica-Northeast1, NorthAmerica-Northeast2, SouthAmerica-East1, SouthAmerica-West1, US-Central1, US-East1, US-East4, US-East5, US-South1, US-West1, US-West2, US-West3, US-West4 | Also supported with NetBackup Appliance 5.0 and later S3 connector. CloudCatalyst: Supported with back-level media servers only. Creating a disk volume via the NetBackup Admin Console or CLI is not supported with this solution. Create the bucket outside of NetBackup using the cloud provider's interface. MSDP Direct Cloud Tiering: Yes S3 Object Lock: Yes, requires NetBackup 10.4 or later. Secure Socket Layer (SSL): Yes Server-side encryption: No Support for the Asia-South2, Australia-Southeast2, and NorthAmerica-Northeast2 regions requires Cloud Configuration Package version 2.9.1 or later. Support for the EU-Southwest1 and EU-West9 regions requires Cloud Configuration Package version 2.9.3 or later. Support for the US-East5 and US-South1 regions requires Cloud Configuration Package version 2.9.4 or later. URL style: Virtual Hosted (default), Path Vendor site: https://cloud.google.com/about/locations/ |
Cloud Storage Archive | NetBackup 10.0 and later S3 connector | No | Africa-South1, Asia (Multi-Regional), Asia-East1, Asia-East2, Asia-Northeast1, Asia-Northeast2, Asia-Northeast3, Asia-South1, Asia-South2, Asia-Southeast1, Asia-Southeast2, Australia-Southeast1, Australia-Southeast2, EU (Multi-Regional), EU-Central2, EU-North1, EU-North2, EU-Southwest1, EU-West1, EU-West10, EU-West12, EU-West2, EU-West3, EU-West4, EU-West6, EU-West8, EU-West9, ME-Central1, ME-Central2, ME-West1, NorthAmerica-Northeast1, NorthAmerica-Northeast2, SouthAmerica-East1, SouthAmerica-West1, US (Multi-Regional), US-Central1, US-East1, US-East4, US-East5, US-South1, US-West1, US-West2, US-West3, US-West4 | Also supported with NetBackup Appliance 5.0 and later S3 connector. CloudCatalyst: Supported with back-level media servers only. Creating a disk volume via the NetBackup Admin Console or CLI is not supported with this solution. Create the bucket outside of NetBackup using the cloud provider's interface. MSDP Direct Cloud Tiering: Yes S3 Object Lock: Yes, requires NetBackup 10.4 or later. Secure Socket Layer (SSL): Yes Server-side encryption: No Support for the Asia-South2, Australia-Southeast2, and NorthAmerica-Northeast2 regions requires Cloud Configuration Package version 2.9.1 or later. Support for the EU-Southwest1 and EU-West9 regions requires Cloud Configuration Package version 2.9.3 or later. Support for the US-East5 and US-South1 regions requires Cloud Configuration Package version 2.9.4 or later. URL style: Virtual Hosted (default), Path Vendor site: https://cloud.google.com/storage/archival |
Cloud Storage Coldline | NetBackup 10.0 and later S3 connector | No | Africa-South1, Asia (Multi-Regional), Asia-East1, Asia-East2, Asia-Northeast1, Asia-Northeast2, Asia-Northeast3, Asia-South1, Asia-South2, Asia-Southeast1, Asia-Southeast2, Australia-Southeast1, Australia-Southeast2, EU (Multi-Regional), EU-Central2, EU-North1, EU-North2, EU-Southwest1, EU-West1, EU-West10, EU-West12, EU-West2, EU-West3, EU-West4, EU-West6, EU-West8, EU-West9, ME-Central1, ME-Central2, ME-West1, NorthAmerica-Northeast1, NorthAmerica-Northeast2, SouthAmerica-East1, SouthAmerica-West1, US (Multi-Regional), US-Central1, US-East1, US-East4, US-East5, US-South1, US-West1, US-West2, US-West3, US-West4 | Also supported with NetBackup Appliance 5.0 and later S3 connector. CloudCatalyst: Supported with back-level media servers only. Creating a disk volume via the NetBackup Admin Console or CLI is not supported with this solution. Create the bucket outside of NetBackup using the cloud provider's interface. MSDP Direct Cloud Tiering: Yes S3 Object Lock: Yes, requires NetBackup 10.4 or later. Secure Socket Layer (SSL): Yes Server-side encryption: No Support for the Asia-South2, Australia-Southeast2, and NorthAmerica-Northeast2 regions requires Cloud Configuration Package version 2.9.1 or later. Support for the EU-Southwest1 and EU-West9 regions requires Cloud Configuration Package version 2.9.3 or later. Support for the US-East5 and US-South1 regions requires Cloud Configuration Package version 2.9.4 or later. URL style: Virtual Hosted (default), Path Vendor site: https://cloud.google.com/storage/archival |
Cloud Storage Nearline | NetBackup 10.0 and later S3 connector | No | Africa-South1, Asia (Multi-Regional), Asia-East1, Asia-East2, Asia-Northeast1, Asia-Northeast2, Asia-Northeast3, Asia-South1, Asia-South2, Asia-Southeast1, Asia-Southeast2, Australia-Southeast1, Australia-Southeast2, EU (Multi-Regional), EU-Central2, EU-North1, EU-North2, EU-Southwest1, EU-West1, EU-West10, EU-West12, EU-West2, EU-West3, EU-West4, EU-West6, EU-West8, EU-West9, ME-Central1, ME-Central2, ME-West1, NorthAmerica-Northeast1, NorthAmerica-Northeast2, SouthAmerica-East1, SouthAmerica-West1, US (Multi-Regional), US-Central1, US-East1, US-East4, US-East5, US-South1, US-West1, US-West2, US-West3, US-West4 | Also supported with NetBackup Appliance 5.0 and later S3 connector. CloudCatalyst: Supported with back-level media servers only. Creating a disk volume via the NetBackup Admin Console or CLI is not supported with this solution. Create the bucket outside of NetBackup using the cloud provider's interface. MSDP Direct Cloud Tiering: Yes S3 Object Lock: Yes, requires NetBackup 10.4 or later. Secure Socket Layer (SSL): Yes Server-side encryption: No Support for the Asia-South2, Australia-Southeast2, and NorthAmerica-Northeast2 regions requires Cloud Configuration Package version 2.9.1 or later. Support for the EU-Southwest1 and EU-West9 regions requires Cloud Configuration Package version 2.9.3 or later. Support for the US-East5 and US-South1 regions requires Cloud Configuration Package version 2.9.4 or later. URL style: Virtual Hosted (default), Path Vendor site: https://cloud.google.com/storage-nearline/ |
Hewlett Packard Enterprise
Cloud Storage Solution | NetBackup Version Containing Plug-in or Vendor-Supplied Plug-in Version | IPv6 | Locales / Regions | Notes |
---|---|---|---|---|
Cloud Volumes | HPE 4.2 Plug-in | No | All Locales | Also supported with NetBackup Appliance 4.0 and later S3 connector. Also supported with NetBackup Appliance 5.0 and later S3 connector. CloudCatalyst: No Granular Recovery Technology with VMware-type policies: Yes Granular Recovery Technology: Yes Instant Recovery for VMware: Yes MSDP Direct Cloud Tiering: No NetBackup Accelerator (for files and folders): Yes NetBackup Accelerator with Hyper-V: Yes NetBackup Accelerator with NDMP: Yes NetBackup Accelerator with VMware: Yes Optimized Duplication: Yes. Supported only when duplicating from a source StoreOnce store to a target Cloud Volumes store. S3 Object Lock: No Vendor site: https://cloudvolumes.hpe.com/welcome/ Whole Image Optimized Duplication: Yes. Supported only when duplicating from a source StoreOnce store to a target Cloud Volumes store. |
Hitachi Vantara
Cloud Storage Solution | NetBackup Version Containing Plug-in or Vendor-Supplied Plug-in Version | IPv6 | Locales / Regions | Notes |
---|---|---|---|---|
Content Platform (HCP) | NetBackup 10.0 and later S3 connector | Yes | On-Premises | Also supported with NetBackup Appliance 5.0 and later S3 connector. CloudCatalyst: Supported with back-level media servers only. MSDP Direct Cloud Tiering: Yes S3 Object Lock: Yes, Requires NetBackup 10.1 or later and Cloud Configuration Package version 2.12.4 or later. Secure Socket Layer (SSL): Yes Server-side encryption: No Supported in LAN and WAN environments. The versioning feature must be enabled in the Hitachi cloud storage settings for both the tenant and the bucket. URL style: Path Vendor site: https://www.hitachivantara.com/en-us/products/cloud-object-platform/content-platform.html |
HCP for Cloud Scale | NetBackup 10.0 and later S3 connector | No | On-Premises | Also supported with NetBackup Appliance 5.0 and later S3 connector.
CloudCatalyst: Supported with back-level media servers only. MSDP Direct Cloud Tiering: Yes S3 Object Lock: Yes Secure Socket Layer (SSL): Yes Server-side encryption: No Supported in LAN and WAN environments. URL style: Path Vendor site: https://www.hitachivantara.com/en-us/products/storage/object-storage/content-platform.html |
IBM
Cloud Storage Solution | NetBackup Version Containing Plug-in or Vendor-Supplied Plug-in Version | IPv6 | Locales / Regions | Notes |
---|---|---|---|---|
Ceph Storage | NetBackup 10.0 and later S3 connector | No | On-Premises | Also supported with NetBackup Appliance 5.0 and later S3 connector.
CloudCatalyst: Supported with back-level media servers only. MSDP Direct Cloud Tiering: Yes S3 Object Lock: Yes, Requires NetBackup 10.4 or later and Cloud Configuration Package version 2.12.7 or later. Secure Socket Layer (SSL): Yes Server-side encryption: No URL style: Path Vendor site: https://www.ibm.com/products/storage-ceph |
Cloud Object Storage - Cold Vault | NetBackup 10.0 and later S3 connector | No | Amsterdam, AP Australia, AP Cross Region, AP Osaka, AP Tokyo, CAN Toronto, Chennai, EU Cross Region, EU Germany, EU United Kingdom, Madrid, Milan, Montreal, Paris, San Jose, Sao Paulo, Singapore, US Cross Region, US East, US South | Also supported with NetBackup Appliance 5.0 and later S3 connector. CloudCatalyst: Supported with back-level media servers only. MSDP Direct Cloud Tiering: Yes Regions AUS Melbourne, Hong Kong, Mexico City, Oslo and Seoul are decommissioned by IBM. Refer Decommissioned locations S3 Object Lock: Yes, requires NetBackup 10.3 or later. Secure Socket Layer (SSL): Yes Server-side encryption: Yes. Supports AES256. URL style: Virtual Hosted (default), Path Vendor site: https://www.ibm.com/cloud-computing/products/storage/object-storage/cloud/ |
Cloud Object Storage - Private | NetBackup 10.0 and later S3 connector | No | On-Premises | Also supported with NetBackup Appliance 5.0 and later S3 connector. CloudCatalyst: Supported with back-level media servers only. MSDP Direct Cloud Tiering: Yes S3 Object Lock: Yes, requires NetBackup 10.3 or later. Secure Socket Layer (SSL): Yes Server-side encryption: Yes. Supports AES256. URL style: Virtual Hosted (default), Path Vendor site: https://www.ibm.com/cloud-computing/products/storage/object-storage/cloud/ |
Cloud Object Storage - Smart Tier | NetBackup 10.0 and later S3 connector | No | Amsterdam, AP Australia, AP Cross Region, AP Osaka, AP Tokyo, CAN Toronto, Chennai, EU Cross Region, EU Germany, EU United Kingdom, Madrid, Milan, Montreal, Paris, San Jose, Sao Paulo, Singapore, US Cross Region, US East, US South | Also supported with NetBackup Appliance 5.0 and later S3 connector. CloudCatalyst: Supported with back-level media servers only. MSDP Direct Cloud Tiering: Yes Regions AUS Melbourne, Hong Kong, Mexico City, Oslo and Seoul are decommissioned by IBM. Refer Decommissioned locations S3 Object Lock: Yes, requires NetBackup 10.3 or later. Secure Socket Layer (SSL): Yes Server-side encryption: Yes. Supports AES256. URL style: Virtual Hosted (default), Path Vendor site: https://www.ibm.com/cloud-computing/products/storage/object-storage/cloud/ |
Cloud Object Storage - Standard | NetBackup 10.0 and later S3 connector | No | Amsterdam, AP Australia, AP Cross Region, AP Osaka, AP Tokyo, CAN Toronto, Chennai, EU Cross Region, EU Germany, EU United Kingdom, Madrid, Milan, Montreal, Paris, San Jose, Sao Paulo, Singapore, US Cross Region, US East, US South | Also supported with NetBackup Appliance 5.0 and later S3 connector. CloudCatalyst: Supported with back-level media servers only. MSDP Direct Cloud Tiering: Yes Regions AUS Melbourne, Hong Kong, Mexico City, Oslo and Seoul are decommissioned by IBM. Refer Decommissioned locations S3 Object Lock: Yes, requires NetBackup 10.3 or later. Secure Socket Layer (SSL): Yes Server-side encryption: Yes. Supports AES256. URL style: Virtual Hosted (default), Path Vendor site: https://www.ibm.com/cloud-computing/products/storage/object-storage/cloud/ |
Cloud Object Storage - Vault | NetBackup 10.0 and later S3 connector | No | Amsterdam, AP Australia, AP Cross Region, AP Osaka, AP Tokyo, CAN Toronto, Chennai, EU Cross Region, EU Germany, EU United Kingdom, Madrid, Milan, Montreal, Paris, San Jose, Sao Paulo, Singapore, US Cross Region, US East, US South | Also supported with NetBackup Appliance 5.0 and later S3 connector. CloudCatalyst: Supported with back-level media servers only. MSDP Direct Cloud Tiering: Yes Regions AUS Melbourne, Hong Kong, Mexico City, Oslo and Seoul are decommissioned by IBM. Refer Decommissioned locations S3 Object Lock: Yes, requires NetBackup 10.3 or later. Secure Socket Layer (SSL): Yes Server-side encryption: Yes. Supports AES256. URL style: Virtual Hosted (default), Path Vendor site: https://www.ibm.com/cloud-computing/products/storage/object-storage/cloud/ |
Impossible Cloud
Cloud Storage Solution | NetBackup Version Containing Plug-in or Vendor-Supplied Plug-in Version | IPv6 | Locales / Regions | Notes |
---|---|---|---|---|
Cloud Storage | NetBackup 10.0 and later S3 connector | No | US-WEST-1 | MSDP Direct Cloud Tiering: Yes
Requires Cloud Configuration Package version 2.10.9 or later. S3 Object Lock: Yes, Requires NetBackup 10.0 or later and Cloud Configuration Package version 2.11.3 or later. Secure Socket Layer (SSL): Yes Server-side encryption: No URL style: Path Vendor site: https://www.impossiblecloud.com/ |
Infoniqa
Cloud Storage Solution | NetBackup Version Containing Plug-in or Vendor-Supplied Plug-in Version | IPv6 | Locales / Regions | Notes |
---|---|---|---|---|
SWISS3CLOUD | NetBackup 10.0 and later S3 connector | No | All Locales | Also supported with NetBackup Appliance 5.0 and later S3 connector. CloudCatalyst: Supported with back-level media servers only. MSDP Direct Cloud Tiering: Yes S3 Object Lock: No Secure Socket Layer (SSL): Yes Server-side encryption: No URL style: Path Vendor site: https://www.infoniqa.ch/cloud-services/swiss3cloud/ |
Iron Mountain
Cloud Storage Solution | NetBackup Version Containing Plug-in or Vendor-Supplied Plug-in Version | IPv6 | Locales / Regions | Notes |
---|---|---|---|---|
Iron Cloud Secure Offline Storage (SOS) | NetBackup 10.3 and later S3 connector | No | us-east-1 | Requires NetBackup 10.3 or later.
MSDP Direct Cloud Tiering: Yes S3 Object Lock: No Secure Socket Layer (SSL): Yes Server-side encryption: No URL style: Path Vendor site: https://www.ironmountain.com/services/iron-cloud-data-management/secure-offline-storage |
iTernity
Cloud Storage Solution | NetBackup Version Containing Plug-in or Vendor-Supplied Plug-in Version | IPv6 | Locales / Regions | Notes |
---|---|---|---|---|
iCAS FS | NetBackup 10.0 and later S3 connector | No | On-Premises | CloudCatalyst: Supported with back-level media servers only.
MSDP Direct Cloud Tiering: Yes Requires NetBackup 10.0.0.1 or later and Cloud Configuration Package version 2.9.4 or later. S3 Object Lock: Yes, Requires NetBackup 10.1 or later and Cloud Configuration Package version 2.11.4 or later. Secure Socket Layer (SSL): Yes Server-side encryption: No URL style: Path Vendor site: https://iternity.com/en/products/icas-fs/ |
Microsoft
Cloud Storage Solution | NetBackup Version Containing Plug-in or Vendor-Supplied Plug-in Version | IPv6 | Locales / Regions | Notes |
---|---|---|---|---|
Azure | NetBackup 10.0 and later Azure connector | No | All Locales | Also supported with NetBackup Appliance 5.0 and later Azure connector. Azure Archive is supported. For more information, see About restore from a backup in Microsoft Azure Archive. Azure Blob storage with hot, cool and cold tiers is supported. Cold tier support requires NetBackup 10.3 or later and Cloud Configuration Package version 2.11.5 or later. CloudCatalyst: Supported with back-level media servers only. MSDP Direct Cloud Tiering: Yes. Supported with Azure and Azure Archive. GRS and GZRS is not supported. Object Lock (Immutable storage): Yes. Secure Socket Layer (SSL): Yes Vendor site: https://docs.microsoft.com/en-us/azure/storage/ |
Azure Germany | NetBackup 10.0 and later Azure connector | No | All Locales | Also supported with NetBackup Appliance 5.0 and later Azure connector. Azure Archive is supported. For more information, see About restore from a backup in Microsoft Azure Archive. Azure Blob storage with hot and cool tiers is supported. CloudCatalyst: Supported with back-level media servers only. MSDP Direct Cloud Tiering: Yes. Supported with Azure and Azure Archive. GRS and GZRS is not supported. Secure Socket Layer (SSL): Yes Vendor site: https://docs.microsoft.com/en-gb/azure/germany/ |
Azure Government | NetBackup 10.0 and later Azure connector | No | All US Gov Locales | Also supported with NetBackup Appliance 5.0 and later Azure connector. Azure Archive is supported. For more information, see About restore from a backup in Microsoft Azure Archive. Azure Blob storage with hot, cool and cold tiers is supported. Cold tier support requires NetBackup 10.3 or later and Cloud Configuration Package version 2.11.5 or later. CloudCatalyst: Supported with back-level media servers only. MSDP Direct Cloud Tiering: Yes. Supported with Azure and Azure Archive. GRS and GZRS is not supported. Object Lock (Immutable storage): Yes. Secure Socket Layer (SSL): Yes Vendor site: https://azure.microsoft.com/en-us/overview/clouds/government/ |
NEC
Cloud Storage Solution | NetBackup Version Containing Plug-in or Vendor-Supplied Plug-in Version | IPv6 | Locales / Regions | Notes |
---|---|---|---|---|
Cloud IaaS | NetBackup 10.0 and later S3 connector | No | All Locales | Also supported with NetBackup Appliance 5.0 and later S3 connector. CloudCatalyst: Supported with back-level media servers only. MSDP Direct Cloud Tiering: Yes S3 Object Lock: No Secure Socket Layer (SSL): No Server-side encryption: No URL style: Path (default), Virtual Hosted Vendor site: http://jpn.nec.com/cloud/service/platform_service/iaas.html |
Cloud IaaS Object Storage N2 | NetBackup 10.1 and later S3 connector | No | Kanagawa, Kobe | CloudCatalyst: Supported with back-level media servers only.
Creating a disk volume via the NetBackup Admin Console, CLI or WebUI Console is not supported with this solution. Create the bucket outside of NetBackup using the cloud provider's interface. Requires Cloud Configuration Package version 2.12.3 or later. MSDP Direct Cloud Tiering: Yes S3 Object Lock: No Secure Socket Layer (SSL): Yes Server-side encryption: No URL style: Path, Virtual Hosted Authentication Signature: Version 4 Vendor site: http://jpn.nec.com/cloud/service/platform_service/iaas.html |
Cloud Storage (St) | NetBackup 10.1 and later S3 connector | No | Inzai | Requires NetBackup 10.1 or later, Cloud Configuration Package version 2.13.2 or later and Device Mappings version 1.183 or later.
MSDP Direct Cloud Tiering: Yes S3 Object Lock: Yes Secure Socket Layer (SSL): Yes Server-side encryption: No URL style: Path, Virtual Hosted Vendor site: https://jpn.nec.com/cloud/service/storage/st/index.html |
HYDRAstor HS3 and HS8 (4th Gen), iStorage HS3 and HS8 (4th Gen) and NEC Storage HS3 and HS8 (4th Gen) | NetBackup 10.0 and later S3 connector | No | On-Premises | Also supported with NetBackup Appliance 5.0 and later S3 connector. CloudCatalyst: Supported with back-level media servers only. MSDP Direct Cloud Tiering: Yes S3 Object Lock: No Secure Socket Layer (SSL): No Server-side encryption: No URL style: Path (default), Virtual Hosted Vendor site: http://www.necam.com/HYDRAstor/ |
HYDRAstor HS3 and HS8 (5th Gen), iStorage HS3 and HS8 (5th Gen) and NEC Storage HS3 and HS8 (5th Gen) | NetBackup 10.0 and later S3 connector | No | On-Premises | Also supported with NetBackup Appliance 5.0 and later S3 connector. CloudCatalyst: Supported with back-level media servers only. MSDP Direct Cloud Tiering: Yes S3 Object Lock: No Secure Socket Layer (SSL): No Server-side encryption: No URL style: Path (default), Virtual Hosted Vendor site: http://www.necam.com/HYDRAstor/ |
NetApp
Cloud Storage Solution | NetBackup Version Containing Plug-in or Vendor-Supplied Plug-in Version | IPv6 | Locales / Regions | Notes |
---|---|---|---|---|
ONTAP S3 | NetBackup 10.0 and later S3 connector | No | On-Premises | MSDP Direct Cloud Tiering: Yes
Requires Cloud Configuration Package version 2.10.9 or later. Creating a disk volume via NetBackup Admin Console, CLI or WebUI Console is not supported with this solution. Create the bucket outside of NetBackup using the cloud provider's interface. S3 Object Lock: Yes, GOVERNANCE mode only. Requires NetBackup 10.3 or later and Cloud Configuration Package version 2.12.8 or later. Secure Socket Layer (SSL): Yes Server-side encryption: No URL style: Path Vendor site: https://www.netapp.com/ |
StorageGRID Webscale Object Storage - LAN | NetBackup 10.2 and later S3 connector | No | All Locales | Requires NetBackup 10.2 or later and Cloud Configuration Package version 2.10.9 or later.
MSDP Direct Cloud Tiering: Yes S3 Object Lock: Yes, requires NetBackup 10.3 or later. Secure Socket Layer (SSL): Yes Server-side encryption: No. URL style: Path (default), Virtual Hosted Vendor site: http://www.netapp.com/us/products/data-management-software/object-storage-grid-sds.aspx |
StorageGRID Webscale Object Storage - WAN | NetBackup 10.0 and later S3 connector | No | All Locales | Also supported with NetBackup Appliance 5.0 and later S3 connector.
CloudCatalyst: Supported with back-level media servers only. MSDP Direct Cloud Tiering: Yes S3 Object Lock: Yes, requires NetBackup 10.1.1 or later. Server-side encryption: Yes. Supports AES256. Secure Socket Layer (SSL): Yes URL style: Path (default), Virtual Hosted Vendor site: http://www.netapp.com/us/products/data-management-software/object-storage-grid-sds.aspx |
NooBaa
Cloud Storage Solution | NetBackup Version Containing Plug-in or Vendor-Supplied Plug-in Version | IPv6 | Locales / Regions | Notes |
---|---|---|---|---|
NooBaa | NetBackup 10.0 and later S3 connector | No | All Locales, On-Premises | Also supported with NetBackup Appliance 5.0 and later S3 connector. CloudCatalyst: Supported with back-level media servers only. MSDP Direct Cloud Tiering: Yes S3 Object Lock: No Secure Socket Layer (SSL): Yes Server-side encryption: No URL style: Path Vendor site: http://www.noobaa.com/ |
Nutanix
Cloud Storage Solution | NetBackup Version Containing Plug-in or Vendor-Supplied Plug-in Version | IPv6 | Locales / Regions | Notes |
---|---|---|---|---|
Objects | NetBackup 10.0 and later S3 connector | No | On-Premises | Also supported with NetBackup Appliance 5.0 and later S3 connector. CloudCatalyst: Supported with back-level media servers only. MSDP Direct Cloud Tiering: Yes S3 Object Lock: Yes, Requires NetBackup 10.3 or later and Cloud Configuration Package version 2.13.1 or later. Only COMPLIANCE mode is supported. Secure Socket Layer (SSL): Yes Server-side encryption: No URL style: Path Vendor site: https://www.nutanix.com/products/objects/ |
Oracle
Cloud Storage Solution | NetBackup Version Containing Plug-in or Vendor-Supplied Plug-in Version | IPv6 | Locales / Regions | Notes |
---|---|---|---|---|
Oracle Cloud Infrastructure | NetBackup 10.0 and later S3 connector | No | AP Chuncheon, AP Hyderabad, AP Melbourne, AP Mumbai, AP Osaka, AP Seoul, AP Singapore 1, AP Singapore 2, AP Sydney, AP Tokyo, CA Montreal, CA Toronto, EU Amsterdam, EU Frankfurt, EU Madrid, EU Marseille, EU Milan, EU Paris, EU Stockholm, EU Zurich, ME Abu Dhabi, ME Dubai, ME Jeddah, MX Monterrey, MX Queretaro, SA Bogota, SA Santiago, SA Sao Paulo, SA Valparaiso, SA Vinhedo, UK London, UK Newport, US Ashburn, US Chicago, US Phoenix, US San Jose | Also supported with NetBackup Appliance 5.0 and later S3 connector. CloudCatalyst: Supported with back-level media servers only. Creating a disk volume (Cloud bucket) via the NetBackup Admin Console, CLI or Web UI Console is not supported with this solution. Create the bucket outside of NetBackup using the cloud provider's interface. MSDP Direct Cloud Tiering: Yes S3 Object Lock: No Secure Socket Layer (SSL): Yes Server-side encryption: Yes. Supports AES256. URL style: Path (default), Virtual Hosted Vendor site: https://cloud.oracle.com/en_US/infrastructure/storage |
Orange Business Services
Cloud Storage Solution | NetBackup Version Containing Plug-in or Vendor-Supplied Plug-in Version | IPv6 | Locales / Regions | Notes |
---|---|---|---|---|
Flexible Engine OBS | NetBackup 10.0 and later S3 connector | No | EU West 0, EU West 1, NA East 0 | Also supported with NetBackup Appliance 5.0 and later S3 connector. CloudCatalyst: Supported with back-level media servers only. MSDP Direct Cloud Tiering: Yes S3 Object Lock: No Secure Socket Layer (SSL): Yes Server-side encryption: No URL style: Path Vendor site: https://cloud.orange-business.com/en/flexible-engine/ |
OVHcloud
Cloud Storage Solution | NetBackup Version Containing Plug-in or Vendor-Supplied Plug-in Version | IPv6 | Locales / Regions | Notes |
---|---|---|---|---|
Standard Object Storage | NetBackup 10.1.1 and later S3 connector | No | Beauharnois, Frankfurt, Gravelines, London, Mumbai, Paris, Roubaix, Singapore, Strasbourg, Sydney, Toronto, Warsaw | MSDP Direct Cloud Tiering: Yes
Requires NetBackup 10.1.1 or later, Cloud Configuration Package version 2.12.10 or later and Device Mappings Package version 1.181 or later. S3 Object Lock: Yes. Secure Socket Layer (SSL): Yes Server-side encryption: Yes, Supports AES256. URL style: Path Vendor site: https://www.ovhcloud.com |
PSPACE
Cloud Storage Solution | NetBackup Version Containing Plug-in or Vendor-Supplied Plug-in Version | IPv6 | Locales / Regions | Notes |
---|---|---|---|---|
InfiniStor | NetBackup 10.1 and later S3 connector | No | All Locales, On-Premises | MSDP Direct Cloud Tiering: Yes
Requires NetBackup 10.1 or later, Cloud Configuration Package version 2.12.7 or later and Device Mappings Package version 1.180 or later. S3 Object Lock: Yes. Secure Socket Layer (SSL): Yes Server-side encryption: Yes, Supports AES256. URL style: Path Vendor site: https://www.pspace.com/ |
Pure Storage
Cloud Storage Solution | NetBackup Version Containing Plug-in or Vendor-Supplied Plug-in Version | IPv6 | Locales / Regions | Notes |
---|---|---|---|---|
FlashBlade | NetBackup 10.0 and later S3 connector | No | On-Premises | MSDP Direct Cloud Tiering: Yes
Requires Cloud Configuration Package version 2.10.10 or later. S3 Object Lock: Yes, Requires NetBackup 10.0 or later and Cloud Configuration Package version 2.11.0 or later. Secure Socket Layer (SSL): Yes Server-side encryption: No URL style: Path Vendor site: https://www.purestorage.com/ |
Quantum
Cloud Storage Solution | NetBackup Version Containing Plug-in or Vendor-Supplied Plug-in Version | IPv6 | Locales / Regions | Notes |
---|---|---|---|---|
Active Archive and ActiveScale Systems - Glacier | NetBackup 10.0 and later S3 connector | No | On-Premises | Also supported with NetBackup Appliance 5.0 and later S3 connector. CloudCatalyst: Supported with back-level media servers only. MSDP Direct Cloud Tiering: Yes Requires Cloud Configuration Package version 2.9.1 or later. S3 Object Lock: No Secure Socket Layer (SSL): Yes Server-side encryption: Yes. Supports AES256. URL style: Path Vendor site: https://www.quantum.com/en/products/object-storage |
Active Archive and ActiveScale Systems - Standard | NetBackup 10.0 and later S3 connector | No | On-Premises | Also supported with NetBackup Appliance 5.0 and later S3 connector. CloudCatalyst: Supported with back-level media servers only. MSDP Direct Cloud Tiering: Yes Requires Cloud Configuration Package version 2.9.1 or later. S3 Object Lock: Yes, requires NetBackup 10.1.1 or later. Secure Socket Layer (SSL): Yes Server-side encryption: Yes. Supports AES256. URL style: Path Vendor site: https://www.quantum.com/en/products/object-storage |
SandStone
Cloud Storage Solution | NetBackup Version Containing Plug-in or Vendor-Supplied Plug-in Version | IPv6 | Locales / Regions | Notes |
---|---|---|---|---|
MOS | NetBackup 10.0 and later S3 connector | No | On-Premises | CloudCatalyst: Supported with back-level media servers only. MSDP Direct Cloud Tiering: Yes S3 Object Lock: No Secure Socket Layer (SSL): Yes Server-side encryption: No URL style: Path Vendor site: http://www.szsandstone.com/product/mos |
Scality
Cloud Storage Solution | NetBackup Version Containing Plug-in or Vendor-Supplied Plug-in Version | IPv6 | Locales / Regions | Notes |
---|---|---|---|---|
RING Storage | NetBackup 10.0 and later S3 connector | No | All Locales, On-Premises | Also supported with NetBackup Appliance 5.0 and later S3 connector. CloudCatalyst: Supported with back-level media servers only. MSDP Direct Cloud Tiering: Yes S3 Object Lock: Yes, Compliance mode requires NetBackup 10.1 or later. Governance mode requires NetBackup 10.1.1 or later. Secure Socket Layer (SSL): Yes Server-side encryption: Yes. Supports AES256. Supported in LAN and WAN environments. URL style: Path (LAN); Virtual Hosted (default), Path (WAN) Vendor site: http://www.scality.com/ |
Seagate
Cloud Storage Solution | NetBackup Version Containing Plug-in or Vendor-Supplied Plug-in Version | IPv6 | Locales / Regions | Notes |
---|---|---|---|---|
Lyve Cloud | NetBackup 10.0 and later S3 connector | No | us-east-1 | Also supported with NetBackup Appliance 5.0 and later S3 connector.
CloudCatalyst: Supported with back-level media servers only. MSDP Direct Cloud Tiering: Yes S3 Object Lock: Yes Secure Socket Layer (SSL): Yes Server-side encryption: No URL style: Path Vendor site: https://www.seagate.com/services/cloud/storage/ |
Spectra Logic
Cloud Storage Solution | NetBackup Version Containing Plug-in or Vendor-Supplied Plug-in Version | IPv6 | Locales / Regions | Notes |
---|---|---|---|---|
Vail | NetBackup 10.1 and later S3 connector | No | On-Premises | MSDP Direct Cloud Tiering: Yes
Requires NetBackup 10.1 or later and Cloud Configuration Package version 2.10.5 or later. S3 Object Lock: No Secure Socket Layer (SSL): Yes Server-side encryption: Yes. Supports AES256. URL style: Path Vendor site: https://spectralogic.com/products/vail/ |
STACKIT
Cloud Storage Solution | NetBackup Version Containing Plug-in or Vendor-Supplied Plug-in Version | IPv6 | Locales / Regions | Notes |
---|---|---|---|---|
Object Storage | NetBackup 10.1 and later S3 connector | No | EU01 | MSDP Direct Cloud Tiering: Yes
Requires NetBackup 10.1 or later and Cloud Configuration Package version 2.10.6 or later. S3 Object Lock: No Secure Socket Layer (SSL): Yes Server-side encryption: Yes. Supports AES256. URL style: Path Vendor site: https://www.stackit.de/ |
SUSE
Cloud Storage Solution | NetBackup Version Containing Plug-in or Vendor-Supplied Plug-in Version | IPv6 | Locales / Regions | Notes |
---|---|---|---|---|
SUSE Enterprise Storage | NetBackup 10.0 and later S3 connector | No | On-Premises | Also supported with NetBackup Appliance 5.0 and later S3 connector. CloudCatalyst: Supported with back-level media servers only. MSDP Direct Cloud Tiering: Yes S3 Object Lock: No Secure Socket Layer (SSL): Yes Server-side encryption: Yes. Supports AES256. URL style: Path Vendor site: https://www.suse.com/products/suse-enterprise-storage/ |
SwiftStack
Cloud Storage Solution | NetBackup Version Containing Plug-in or Vendor-Supplied Plug-in Version | IPv6 | Locales / Regions | Notes |
---|---|---|---|---|
Object Storage | NetBackup 10.0 and later S3 connector | No | On-Premises | Also supported with NetBackup Appliance 5.0 and later S3 connector. CloudCatalyst: Supported with back-level media servers only. Creating a disk volume via the NetBackup Admin Console or CLI is not supported with this solution. Create the bucket outside of NetBackup using the cloud provider's interface. For information on upgrading from 1 MB to 16 MB object size, refer to the vendor's documentation. MSDP Direct Cloud Tiering: Yes S3 Object Lock: No Secure Socket Layer (SSL): Yes Server-side encryption: No URL style: Path Vendor site: https://www.swiftstack.com |
Tencent
Cloud Storage Solution | NetBackup Version Containing Plug-in or Vendor-Supplied Plug-in Version | IPv6 | Locales / Regions | Notes |
---|---|---|---|---|
Cloud Object Storage (COS) - ARCHIVE | NetBackup 10.0 and later S3 connector | No | ap-bangkok, ap-beijing, ap-beijing-1, ap-chengdu, ap-chongqing, ap-guangzhou, ap-hongkong, ap-mumbai, ap-nanjing, ap-seoul, ap-shanghai, ap-singapore, ap-tokyo, eu-frankfurt, eu-moscow, na-ashburn, na-siliconvalley, na-toronto | Also supported with NetBackup Appliance 5.0 and later S3 connector. CloudCatalyst: Supported with back-level media servers only. MSDP Direct Cloud Tiering: Yes S3 Object Lock: No Secure Socket Layer (SSL): Yes Server-side encryption: Yes. Supports AES256. URL style: Path Vendor site: https://intl.cloud.tencent.com/ |
Cloud Object Storage (COS) - DEEP ARCHIVE | NetBackup 10.0 and later S3 connector | No | ap-beijing, ap-chengdu, ap-guangzhou, ap-shanghai | Also supported with NetBackup Appliance 5.0 and later S3 connector. CloudCatalyst: Supported with back-level media servers only. MSDP Direct Cloud Tiering: Yes S3 Object Lock: No Secure Socket Layer (SSL): Yes Server-side encryption: Yes. Supports AES256. URL style: Path Vendor site: https://intl.cloud.tencent.com/ |
Cloud Object Storage (COS) - Standard | NetBackup 10.0 and later S3 connector | No | ap-bangkok, ap-beijing, ap-beijing-1, ap-chengdu, ap-chongqing, ap-guangzhou, ap-hongkong, ap-mumbai, ap-nanjing, ap-seoul, ap-shanghai, ap-singapore, ap-tokyo, eu-frankfurt, eu-moscow, na-ashburn, na-siliconvalley, na-toronto | Also supported with NetBackup Appliance 5.0 and later S3 connector. CloudCatalyst: Supported with back-level media servers only. MSDP Direct Cloud Tiering: Yes S3 Object Lock: No Secure Socket Layer (SSL): Yes Server-side encryption: Yes. Supports AES256. URL style: Path Vendor site: https://intl.cloud.tencent.com/ |
Cloud Object Storage (COS) - Standard IA | NetBackup 10.0 and later S3 connector | No | ap-bangkok, ap-beijing, ap-beijing-1, ap-chengdu, ap-chongqing, ap-guangzhou, ap-hongkong, ap-mumbai, ap-nanjing, ap-seoul, ap-shanghai, ap-singapore, ap-tokyo, eu-frankfurt, eu-moscow, na-ashburn, na-siliconvalley, na-toronto | Also supported with NetBackup Appliance 5.0 and later S3 connector. CloudCatalyst: Supported with back-level media servers only. MSDP Direct Cloud Tiering: Yes S3 Object Lock: No Secure Socket Layer (SSL): Yes Server-side encryption: Yes. Supports AES256. URL style: Path Vendor site: https://intl.cloud.tencent.com/ |
VAST Data
Cloud Storage Solution | NetBackup Version Containing Plug-in or Vendor-Supplied Plug-in Version | IPv6 | Locales / Regions | Notes |
---|---|---|---|---|
Data Platform | NetBackup 10.0 and later S3 connector | No | On-Premises | MSDP Direct Cloud Tiering: Yes
Requires Cloud Configuration Package version 2.10.8 or later. S3 Object Lock: Yes, Requires NetBackup 10.3 or later and Cloud Configuration Package version 2.11.0 or later. Secure Socket Layer (SSL): Yes Server-side encryption: No. Default location is VAST-1 URL style: Path Vendor site: https://vastdata.com/ |
Veritas
Cloud Storage Solution | NetBackup Version Containing Plug-in or Vendor-Supplied Plug-in Version | IPv6 | Locales / Regions | Notes |
---|---|---|---|---|
Alta Recovery Vault AWS Archive | NetBackup 10.0.0.1 and later S3 connector | No | Africa (Cape Town), Asia Pacific (Hong Kong), Asia Pacific (Hyderabad), Asia Pacific (Jakarta), Asia Pacific (Melbourne), Asia Pacific (Mumbai), Asia Pacific (Osaka), Asia Pacific (Seoul), Asia Pacific (Singapore), Asia Pacific (Sydney), Asia Pacific (Tokyo), Canada (Central), Europe (Frankfurt), Europe (Ireland), Europe (London), Europe (Milan), Europe (Paris), Europe (Spain), Europe (Stockholm), Europe (Zurich), Israel (Tel Aviv), Middle East (Bahrain), Middle East (UAE), South America (Sao Paulo), US East (N. Virginia FIPS 140-2), US East (N. Virginia), US East (Ohio FIPS 140-2), US East (Ohio), US West (N. California FIPS 140-2), US West (N. California), US West (Oregon FIPS 140-2), US West (Oregon) | Beginning May 1, 2023 new buckets in Recovery Vault are supported only with Immutability enabled both on the bucket and at the NetBackup Storage Unit level.
Also supported with NetBackup Appliance 5.0.0.1 and later S3 connector. MSDP Direct Cloud Tiering: Yes NetBackup Accelerator (for files and folders): No NetBackup Accelerator with VMware: No NetBackup supports Amazon Glacier Deep Archive standard retrieval policies. For more information on times required for retrieval, see Amazon's documentation for this storage class. Veritas recommends setting the retrieval retention period to a minimum of 3 days. S3 Object Lock: Yes Secure Socket Layer (SSL): Yes Server-side encryption: Yes. Supports AES256. URL style: Virtual Hosted (default), Path Vendor site: http://aws.amazon.com/s3 |
Alta Recovery Vault AWS GovCloud Archive | NetBackup 10.0.0.1 and later S3 connector | No | US East1 (Gov FIPS 140-2), US East1 (Gov Non-FIPS), US West1 (Gov FIPS 140-2), US West1 (Gov Non-FIPS) | Beginning May 1, 2023 new buckets in Recovery Vault are supported only with Immutability enabled both on the bucket and at the NetBackup Storage Unit level.
Also supported with NetBackup Appliance 5.0.0.1 and later S3 connector. AWS C2S is supported with this solution. When configuring C2S through a CAP server, use a non-encrypted client key. MSDP Direct Cloud Tiering: Yes. Only supported with the non-FIPS endpoints at this time. NetBackup Accelerator (for files and folders): No NetBackup Accelerator with VMware: No NetBackup supports Amazon Glacier Deep Archive standard retrieval policies. For more information on times required for retrieval, see Amazon's documentation for this storage class. Veritas recommends setting the retrieval retention period to a minimum of 3 days. S3 Object Lock: Yes Secure Socket Layer (SSL): Yes Server-side encryption: Yes. Supports AES256. URL style: Virtual Hosted (default), Path http://aws.amazon.com/govcloud-us/ |
Alta Recovery Vault AWS GovCloud Standard | NetBackup 10.0 and later S3 connector | No | US East1 (Gov FIPS 140-2), US East1 (Gov Non-FIPS), US West1 (Gov FIPS 140-2), US West1 (Gov Non-FIPS) | Beginning May 1, 2023 new buckets in Recovery Vault are supported only with Immutability enabled both on the bucket and at the NetBackup Storage Unit level.
Also supported with NetBackup Appliance 5.0 and later S3 connector. AWS C2S is supported with this solution. CloudCatalyst: No NetBackup Accelerator (for files and folders): Yes NetBackup Accelerator with VMware: Yes MSDP Direct Cloud Tiering: Yes. Only supported with the non-FIPS endpoints at this time. Requires the Emergency Engineering Binaries in bundle https://www.veritas.com/content/support/en_US/downloads/update.UPD179558 S3 Object Lock: Yes Secure Socket Layer (SSL): Yes Server-side encryption: Yes. Supports AES256. URL style: Virtual Hosted (default), Path Vendor site: http://aws.amazon.com/govcloud-us/ |
Alta Recovery Vault AWS Standard | NetBackup 10.0 and later S3 connector | No | Africa (Cape Town), Asia Pacific (Hong Kong), Asia Pacific (Hyderabad), Asia Pacific (Jakarta), Asia Pacific (Melbourne), Asia Pacific (Mumbai), Asia Pacific (Osaka), Asia Pacific (Seoul), Asia Pacific (Singapore), Asia Pacific (Sydney), Asia Pacific (Tokyo), Canada (Central), Europe (Frankfurt), Europe (Ireland), Europe (London), Europe (Milan), Europe (Paris), Europe (Spain), Europe (Stockholm), Europe (Zurich), Israel (Tel Aviv), Middle East (Bahrain), Middle East (UAE), South America (Sao Paulo), US East (N. Virginia FIPS 140-2), US East (N. Virginia), US East (Ohio FIPS 140-2), US East (Ohio), US West (N. California FIPS 140-2), US West (N. California), US West (Oregon FIPS 140-2), US West (Oregon) | Beginning May 1, 2023 new buckets in Recovery Vault are supported only with Immutability enabled both on the bucket and at the NetBackup Storage Unit level.
Also supported with NetBackup Appliance 5.0 and later S3 connector. CloudCatalyst: No NetBackup Accelerator (for files and folders): Yes NetBackup Accelerator with VMware: Yes MSDP Direct Cloud Tiering: Yes Requires the Emergency Engineering Binaries in bundle https://www.veritas.com/content/support/en_US/downloads/update.UPD179558 S3 Object Lock: Yes Secure Socket Layer (SSL): Yes Server-side encryption: Yes. Supports AES256. Support for the Asia Pacific (Jakarta) region requires Cloud Configuration Package version 2.9.1 or later. URL style: Virtual Hosted (default), Path Vendor site: http://aws.amazon.com/s3 |
Alta Recovery Vault Azure | NetBackup 10.0 and later Azure connector | No | All Locales | Beginning May 1, 2023 new buckets in Recovery Vault are supported only with Immutability enabled both on the bucket and at the NetBackup Storage Unit level.
Cloud regions in Mainland China are not supported. For Azure reserved access regions, contact Veritas Product Management to enable the support. Also supported with NetBackup Appliance 5.0 and later Azure connector. Azure Blob storage with cool tiers is supported. CloudCatalyst: No NetBackup Accelerator (for files and folders): Yes NetBackup Accelerator with VMware: Yes MSDP Direct Cloud Tiering: Yes Secure Socket Layer (SSL): Yes Vendor site: https://docs.microsoft.com/en-us/azure/storage/ |
Alta Recovery Vault Azure Archive | NetBackup 10.0.0.1 and later Azure connector | No | All Locales | Beginning May 1, 2023 new buckets in Recovery Vault are supported only with Immutability enabled both on the bucket and at the NetBackup Storage Unit level.
Cloud regions in Mainland China are not supported. For Azure reserved access regions, contact Veritas Product Management to enable the support. Also supported with NetBackup Appliance 5.0 and later Azure connector. CloudCatalyst: No NetBackup Accelerator (for files and folders): No NetBackup Accelerator with VMware: No MSDP Direct Cloud Tiering: Yes Secure Socket Layer (SSL): Yes Vendor site: https://docs.microsoft.com/en-us/azure/storage/ |
Alta Recovery Vault Azure Government | NetBackup 10.0 and later Azure connector | No | All US Gov Locales | Beginning May 1, 2023 new buckets in Recovery Vault are supported only with Immutability enabled both on the bucket and at the NetBackup Storage Unit level.
Also supported with NetBackup Appliance 5.0 and later Azure connector. Azure Blob storage with cool tiers is supported. CloudCatalyst: No NetBackup Accelerator (for files and folders): Yes NetBackup Accelerator with VMware: Yes MSDP Direct Cloud Tiering: Yes Secure Socket Layer (SSL): Yes Vendor site: https://azure.microsoft.com/en-us/overview/clouds/government/ |
Alta Recovery Vault Azure Government Archive | NetBackup 10.0.0.1 and later Azure connector | No | All US Gov Locales | Beginning May 1, 2023 new buckets in Recovery Vault are supported only with Immutability enabled both on the bucket and at the NetBackup Storage Unit level.
Also supported with NetBackup Appliance 5.0 and later Azure connector. CloudCatalyst: No NetBackup Accelerator (for files and folders): No NetBackup Accelerator with VMware: No MSDP Direct Cloud Tiering: Yes Secure Socket Layer (SSL): Yes Vendor site: https://azure.microsoft.com/en-us/overview/clouds/government/ |
Veritas Access | NetBackup 10.0 and later S3 connector | No | On-Premises | Also supported with NetBackup Appliance 5.0 and later S3 connector.
CloudCatalyst: Supported with back-level media servers only. MSDP Direct Cloud Tiering: Yes S3 Object Lock: Yes Secure Socket Layer (SSL): Yes Server-side encryption: No URL style: Path (default), Virtual Hosted Vendor site: https://www.veritas.com/product/software-defined-storage/access |
Veritas Access 3340/3350 Appliance | NetBackup 10.0 and later S3 connector | No | On-Premises | Also supported with NetBackup Appliance 5.0 and later S3 connector.
CloudCatalyst: Supported with back-level media servers only. MSDP Direct Cloud Tiering: Yes S3 Object Lock: Yes Secure Socket Layer (SSL): Yes Server-side encryption: No URL style: Path (default), Virtual Hosted Vendor site: https://www.veritas.com/product/software-defined-storage/access |
Wasabi
Cloud Storage Solution | NetBackup Version Containing Plug-in or Vendor-Supplied Plug-in Version | IPv6 | Locales / Regions | Notes |
---|---|---|---|---|
Hot Cloud Storage | NetBackup 10.0 and later S3 connector | No | ap-northeast-1 (Tokyo), ap-northeast-2 (Osaka), ap-southeast-1 (Singapore), ap-southeast-2 (Sydney), ca-central-1 (Toronto), eu-central-1 (Amsterdam), eu-central-2 (Frankfurt), eu-south-1 (Milan), eu-west-1 (London), eu-west-2 (Paris), eu-west-3 (London), us-central-1 (Plano, Texas), us-east-1 (Ashburn, Virginia), us-east-2 (Manassas, Virginia), us-west-1 (Oregon) | Also supported with NetBackup Appliance 5.0 and later S3 connector. CloudCatalyst: Supported with back-level media servers only. MSDP Direct Cloud Tiering: Yes S3 Object Lock: Yes, requires NetBackup 10.1 or later. Secure Socket Layer (SSL): Yes Server-side encryption: Yes. Supports AES256. Support for the ap-southeast-1 (Singapore) region requires Cloud Configuration Package version 2.9.3 or later. Support for the ap-southeast-2 (Sydney), ca-central-1 (Toronto) and eu-central-2 (Frankfurt) regions requires Cloud Configuration Package version 2.9.2 or later. Support for the eu-west-2 (Paris) region requires Cloud Configuration Package version 2.9.1 or later. Support for the us-east-1 (Ashburn, Virginia) requires NetBackup 10.1 or later. URL style: Virtual Hosted (default), Path Vendor site: https://wasabi.com |
OST Storage Servers
OpenStorage Servers are intelligent storage devices that interface to NetBackup Media Servers via the Veritas OpenStorage (OST) API. The vendor supplying the Storage Server appliance provides a software plug-in, which is installed on each NetBackup Media Server that is attached to the OpenStorage Server.
OST Storage Servers support information is listed below, organized by vendor. Under each vendor there are separate tables showing compatibility with NetBackup Appliances and with Linux/Windows operating systems. The tables provide information on supported versions of plug-ins and functionality, and other important notes about the hardware and its compatibility. OST functionality is available on all supported NetBackup Media Server platforms. If you do not see OST support for your desired Storage Server appliance / Media Server OS platform, please contact that Storage Server appliance vendor to request OST support for that platform. Please see the Veritas NetBackup Administrator's Guide for more information on how to use OST.
OST Storage Servers - Considerations | OST Storage Servers - Supported Functionality | OST Storage Servers - Links to Vendor Sites | OST Storage Servers - Vendor Compatibility
OST Storage Servers - Considerations
Subject | Notes |
---|---|
Support assumptions |
For details on supported operating systems, please refer to the "NetBackup 10.0 - 10.x.x Operating System Software Compatibility List".
1. All OpenStorage Servers are compatible with the NetBackup Data Protection Optimization Option features (Storage Lifecycle Policies, Intelligent Disk Capacity Management and Media Server Load Balancing) and the SAN Client (currently supported only with Solaris SPARC and Linux x64 media servers). 2. Where support is shown for NetBackup 5200 Series or 5300 Series Appliances it means that the OST solution is supported on appliances running versions 3.2 or later, unless noted otherwise. 3. Where support is shown for "Windows Server 2012 Datacenter" it also means that the other editions of Windows Server 2012, Windows Storage Server 2012, Windows Server 2012 R2, and Windows Storage Server 2012 R2 are supported. 4. Where support is shown for "Windows Server 2016 Datacenter" it also means that the other editions of Windows Server 2016 and Windows Storage Server 2016 are supported. 5. Where support is shown for "Windows Server 2019 Datacenter" it also means that the other editions of Windows Server 2019 are supported. 6. Where support is shown for "Windows Server 2022 Datacenter" it also means that the other editions of Windows Server 2022 are supported. 7. CentOS and Oracle Linux are not supported with OpenStorage, unless noted otherwise. 8. SUSE Linux Enterprise Server 12 support requires SP3 or later. |
Vendor support considerations |
1. Veritas and OpenStorage server vendors have mutually agreed to support NetBackup customers with OST solutions.
Veritas and most OST server vendors are members of TSANet.
2. Veritas qualifies OpenStorage plug-ins for use with NetBackup. The qualified plug-ins are maintained by the party that writes and distributes the plug-ins. Features Veritas Partners implement behind the OST API, that operate independently and are transparent to NetBackup and the OpenStorage API (for example, replication between storage servers, deduplication on the storage server, deduplication-aware plug-ins, data transport mechanisms between the media server and the storage server), are not specifically qualified by Veritas. Partner-specific features designed to interoperate in the NetBackup environment as part of the total solution are the maintenance responsibility of the partner. Check the partner's compatibility list to ensure support of the feature with NetBackup and to ensure that your infrastructure (that is, hardware and network) meets the partner's recommended sizing considerations for the feature. 3. Check the device manufacturer's compatibility list to verify the minimum version of Storage Server software required for your Storage Server family member, that the Storage Server software version you are running is compatible with the plug-in version, and that the storage server software version supports the OpenStorage functionality you are running. 4. Minor versions of the plug-ins listed in the tables below are also supported. (Example: Version "2.0" means versions 2.0.1, 2.0.2, etc. are also supported. Version "3" means versions 3.1, 3.2, etc. are also supported.) |
Configuration considerations |
1. The Data Interface column in the tables below describes the supported data path between the media server running the vendor's OST plug-in and the OST storage server.
2. The Veritas NetBackup OpenStorage Optimized Duplication feature takes advantage of the replication capabilities built into many storage servers and cloud solutions by allowing images replicated by the storage servers or cloud solutions to be registered as duplicated copies in the NetBackup catalog. This feature requires at least one NetBackup Media Server with connectivity to both the source storage server or cloud solution and the destination storage server or cloud solution. Optimized Duplication cannot be performed across NetBackup domains. 3. A Logical Storage Unit (LSU) must be configured to only one NetBackup domain. Media servers from more than one NetBackup domain configured to the same LSU is not supported. |
Operational considerations |
1. Storage Servers that do not automatically increase the size of LSUs may take advantage of the LSU spanning feature.
For information about spanning volumes on OpenStorage disk pools, see the Veritas NetBackup OpenStorage Solutions Guide for Disk.
2. The NetBackup Accelerator, Accelerator with NDMP, and Accelerator with VMware-type policies features are not supported with spanned LSUs. |
OST Storage Servers - Supported Functionality
The following table lists NetBackup OpenStorage functionality and indicates the NetBackup 10.x version at which that functionality was first supported. For detailed descriptions of OpenStorage functionality, see the "NetBackup OpenStorage Solutions Guide for Disk".
To see which OST functionality is supported with your OpenStorage solution, refer to the "Supported OpenStorage Functionality" column in the Vendor Compatibility tables below.
OpenStorage Functionality | Abbreviation | NetBackup Start of Support | Notes |
---|---|---|---|
Accelerator (for files and folders) | Accelerator | 10.0 | If your storage server shows support for Accelerator in the tables below, Veritas recommends updating your device mappings file to the current version to ensure this functionality is enabled.
If you are running Accelerator-enabled backups of Windows clients whose file systems contain hard linked files, see "Accelerator enabled backups of Windows hard linked files to OpenStorage disk storage may cause bptm to crash". Accelerator is not supported with spanned Logical Storage Units (LSU). |
Accelerator with NDMP | Accel_NDMP | 10.0 |
Supported with Dell EMC Isilon Scale-Out NAS filers, and NetApp AFF, FAS, and V series filers.
For more information on this feature, see the "About NetBackup Accelerator for NDMP". Accelerator with NDMP is not supported with spanned LSUs. |
Accelerator with Hyper-V-type policies | Accel_Hyper-V | 10.0 | If your storage server shows support for Accelerator with Hyper-V in the tables below, Veritas recommends updating your device mappings file to the current version to ensure this functionality is enabled.
Accelerator with Hyper-V-type policies is not supported with spanned LSUs. Accelerator with Hyper-V-type policies is not supported with shared virtual disks and VHD sets. Accelerator with Hyper-V-type policies support requires Hyper-V Server 2016 or later. For more information on this feature, see the "Veritas NetBackup for Hyper-V Administrator's Guide". |
Accelerator with VMware-type policies | Accel_VMware | 10.0 | If your storage server shows support for Accelerator with VMware in the tables below, Veritas recommends updating your device mappings file to the current version to ensure this functionality is enabled.
Accelerator with VMware-type policies is not supported with spanned LSUs. For more information on this feature, see the "Veritas NetBackup for VMware Administrator's Guide". |
Auto Image Replication | A.I.R. | 10.0 |
For more information on configuring Auto Image Replication, see "About the storage lifecycle policies required for Auto Image Replication".
Veritas recommends replicating images from NetBackup 8.0 or later storage servers to target storage servers running the same NetBackup version. Replicating images between NetBackup 8.0 or later storage servers and NetBackup 7.x storage servers is supported, however, due to differences in encryption and fingerprinting methods, the additional processing required may cause performance issues and causes the replicated image data to be unencrypted while in transit. In configurations running both A.I.R. and Targeted A.I.R., Veritas recommends setting the Storage Lifecycle Policies parameter "Auto create A.I.R. import SLP" to "No" and creating non-Targeted A.I.R. import policies only where desired. Only one media server should be configured to each target Logical Storage Unit (LSU). Each source and target storage server should have its credentials configured in only one NetBackup domain. |
Targeted Auto Image Replication | Targeted_A.I.R. | 10.0 | If your storage server shows support for Targeted A.I.R. in the tables below, Veritas recommends updating your device mappings file to the current version to ensure this functionality is enabled.
Veritas recommends replicating images from NetBackup 8.0 or later storage servers to target storage servers running the same NetBackup version. Replicating images between NetBackup 8.0 or later storage servers and NetBackup 7.x storage servers is supported, however, due to differences in encryption and fingerprinting methods, the additional processing required may cause performance issues and causes the replicated image data to be unencrypted while in transit. In configurations running both A.I.R. and Targeted A.I.R., Veritas recommends setting the Storage Lifecycle Policies parameter "Auto create A.I.R. import SLP" to "No" and creating non-Targeted A.I.R. import policies only where desired. Only one media server should be configured to each target Logical Storage Unit (LSU). Each source and target storage server should have its credentials configured in only one NetBackup domain. When support for Targeted A.I.R. is shown in the tables below, all replication topologies are supported, unless noted otherwise. |
Direct Copy to dedicated tape drives | Direct_Copy | 10.0 | |
Direct Copy to shared tape drives | Direct_Copy_Shared | 10.0 | |
Granular Recovery Technology | Granular_Recovery | 10.0 | Support for the Veritas NetBackup OpenStorage Granular Recovery Technology feature is described in "Granular Restore Technology (GRT) support for NetBackup with PureDisk (PDDO/PDDE)" and "Granular Restore Technology (GRT) support for NetBackup with 3rd-party OpenStorage Secondary Storage Solutions". |
Granular Recovery Technology with VMware-type policies | GRT_VMware | 10.0 | Support for VMware-type backup policies with Application Protection options enabled for Exchange or SharePoint. Support for the Veritas NetBackup OpenStorage Granular Recovery Technology feature is described in "Granular Restore Technology (GRT) support for NetBackup with PureDisk (PDDO/PDDE)" and "Granular Restore Technology (GRT) support for NetBackup with 3rd-party OpenStorage Secondary Storage Solutions". |
Immutable Data / WORM | WORM | 10.0 |
When support for immutable data/WORM (Write Once Read Many) is shown in the tables below, basic backup/restore, duplication, A.I.R. and Targeted A.I.R. using WORM are supported.
Data Immutability/WORM is supported with Client Direct with NetBackup 9.1 and later. |
Instant Recovery for VMware | IR_VMware | 10.0 | Support for restoring virtual machines with Instant Recovery is described in the "Veritas NetBackup for VMware Administrator's Guide". For details on supported platforms for instant recovery restore hosts, see "Support for NetBackup 7.7.x, 8.x, and 9.x in virtual environments". |
NetBackup Encryption Key Management Service | KMS | 10.0 | In the OST Cloud vendor tables, KMS indicates that the cloud provider supports using NetBackup KMS to encrypt backups to cloud targets. In the OST Storage Servers vendor tables, KMS indicates that the plug-in supports NetBackup KMS with Direct Copy to Tape functionality. |
Optimized Duplication | Opt_Dup | 10.0 | Optimized Duplication transfers data in 256 KB chunks. |
Optimized Duplication (Whole Image Copy) | WI_Opt_Dup | 10.0 | Whole image Optimized Duplication uses the storage unit's Maximum fragment size to transfer an entire NetBackup image fragment in a single operation. |
Optimized Synthetics | Opt_Synth | 10.0 | Storage Lifecycle Policies are not supported in policies that use the multiple copy synthetic backups method. For details, see "Storage lifecycle policies are not supported in policies that use the multiple copy synthetic backups method". |
OST Storage Servers - Links to Vendor Sites
More information on NetBackup OpenStorage solutions is available at the following OST Storage Server vendors' websites.
OST Storage Servers - Vendor Compatibility
Dell EMC | Dell EMC Data Domain | ExaGrid | FalconStor | Fujitsu | H3C | Hewlett Packard Enterprise | Infinidat | NEC | Oracle | Quantum | Quest | Secsmart | Veritas
Dell EMC
Dell EMC - Support with Windows / Linux
Storage Server Family | Plug-in | Data Interface | IPv6 | Supported OpenStorage Functionality | Windows Server 2012 x64 |
---|---|---|---|---|---|
DR2000v [1] | 3.1 | Ethernet | No | Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth | Datacenter [2] |
| |||||
DR2000v [1] | 3.2 | Ethernet | No | Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, Opt_Dup, Opt_Synth | Datacenter [2] |
| |||||
DR Series | 3.1 | Ethernet | No | Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, Opt_Dup, Opt_Synth | Datacenter [2] |
| |||||
DR Series | 3.2 | Ethernet | No | Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, Opt_Dup, Opt_Synth | Datacenter [2] |
|
- This device is a virtual appliance. For compatible versions of VMware, see Dell EMC's and VMware's compatibility lists.
- Requires a force install on Windows platforms. Contact Dell EMC for instructions.
Dell EMC - Family Membership
Storage Server Family | Members |
---|---|
DR Series | DR4000, DR4100, DR6000 |
Dell EMC Data Domain
Dell EMC Data Domain - Support with NetBackup Appliance and Flex Appliance
Storage Server Family | Plug-in | Data Interface | IPv6 | Supported OpenStorage Functionality | 5200 Series | 5300 Series |
---|---|---|---|---|---|---|
Appliance series [1][2][3][4] | 7.2 | Ethernet | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | Yes | Yes |
| ||||||
Appliance series [1][2][3][4][5] | 7.2 | Fibre Channel | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | Yes | Yes |
| ||||||
Appliance series [1][2][3][6] | 7.3 | Ethernet | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | Yes | Yes |
| ||||||
Appliance series [1][2][3][5][6] | 7.3 | Fibre Channel | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | Yes | Yes |
| ||||||
Appliance series [1][2][3][7] | 7.4 | Ethernet | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | Yes | Yes |
| ||||||
Appliance series [1][2][3][5][7] | 7.4 | Fibre Channel | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | Yes | Yes |
| ||||||
Appliance series [1][3][7] | 7.5 | Ethernet | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | Yes | Yes |
| ||||||
Appliance series [1][3][5][7] | 7.5 | Fibre Channel | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | Yes | Yes |
| ||||||
Appliance series [1][3][7] | 7.6 | Ethernet | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | Yes | Yes |
| ||||||
Appliance series [1][3][5][7] | 7.6 | Fibre Channel | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | Yes | Yes |
| ||||||
Appliance series [1][3][7] | 7.7 | Ethernet | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | Yes | Yes |
| ||||||
Appliance series [1][3][5][7] | 7.7 | Fibre Channel | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | Yes | Yes |
| ||||||
Appliance series [1][3][7][8] | 7.8 | Ethernet | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | Yes | Yes |
| ||||||
Appliance series [1][3][5][7][8] | 7.8 | Fibre Channel | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | Yes | Yes |
| ||||||
Appliance series [1][3][7][8] | 7.9 | Ethernet | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | Yes | Yes |
| ||||||
Appliance series [1][3][5][7][8] | 7.9 | Fibre Channel | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | Yes | Yes |
| ||||||
Appliance series [1][3][7][8] | 7.10 | Ethernet | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | Yes | Yes |
| ||||||
Appliance series [1][3][5][7][8] | 7.10 | Fibre Channel | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | Yes | Yes |
| ||||||
Appliance series [1][3][7][8] | 8.1 | Ethernet | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | Yes | Yes |
| ||||||
Appliance series [1][3][8] | 8.3 | Ethernet | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | Yes | Yes |
| ||||||
Virtual Edition (VMware) [1][2][3][4][9] | 7.2 | Ethernet | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | Yes | Yes |
| ||||||
Virtual Edition (VMware) [1][2][3][6][9] | 7.3 | Ethernet | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | Yes | Yes |
| ||||||
Virtual Edition (VMware) [1][2][3][7][9] | 7.4 | Ethernet | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | Yes | Yes |
| ||||||
Virtual Edition (VMware) [1][3][7][9] | 7.5 | Ethernet | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | Yes | Yes |
| ||||||
Virtual Edition (VMware) [1][3][7][9] | 7.6 | Ethernet | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | Yes | Yes |
| ||||||
Virtual Edition (VMware) [1][3][7][9] | 7.7 | Ethernet | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | Yes | Yes |
| ||||||
Virtual Edition (VMware) [1][3][7][8][9] | 7.8 | Ethernet | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | Yes | Yes |
| ||||||
Virtual Edition (VMware) [1][3][7][8][9] | 7.9 | Ethernet | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | Yes | Yes |
| ||||||
Virtual Edition (VMware) [1][3][7][8][9] | 7.10 | Ethernet | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | Yes | Yes |
| ||||||
Virtual Edition (VMware) [1][3][7][8][9] | 8.1 | Ethernet | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | Yes | Yes |
| ||||||
Virtual Edition (VMware) [1][3][8][9] | 8.3 | Ethernet | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | Yes | Yes |
|
- IPv6 is supported with NetBackup 8.1.1 and later.
- Supported with NetBackup 9.0 and later only when upgrading from an earlier NetBackup version on which the plug-in is running. If the plug-in needs to be reinstalled after upgrading NetBackup to 9.0 or later, you must install plug-in version 7.5 or later.
- Targeted A.I.R. is supported in One-to-One, One-to-Many, and Many-to-One configurations.
- WORM support requires plug-in version 7.2.0.50 or later and NetBackup 8.3.0.1 or later.
- When running Targeted A.I.R. over Fibre Channel, Windows is only supported as a target domain.
- WORM support requires plug-in version 7.3.0.10 or later and NetBackup 8.3.0.1 or later.
- WORM support requires NetBackup 8.3.0.1 or later.
- Supports PowerProtect Smart Scale, however T-AIR functionality is not supported in this release of Smart Scale.
- This device is a virtual appliance. For compatible versions of VMware, see Dell EMC Data Domain's and VMware's compatibility lists.
Dell EMC Data Domain - Support with Windows / Linux
Storage Server Family | Plug-in | Data Interface | IPv6 | Supported OpenStorage Functionality | Windows Server 2012 x64 | Windows Server 2016 x64 | Windows Server 2019 x64 | Windows Server 2022 x64 | Red Hat Enterprise Linux on x86-64 | SUSE Linux Enterprise Server on x86-64 |
---|---|---|---|---|---|---|---|---|---|---|
Appliance series [1][2][3][4] | 7.2 | Ethernet | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | Datacenter | Datacenter | Datacenter | No | 7, 8 | 12, 15 |
| ||||||||||
Appliance series [1][2][3][4][5] | 7.2 | Fibre Channel | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | Datacenter | Datacenter | Datacenter | No | 7, 8 | 12, 15 |
| ||||||||||
Appliance series [1][2][3][6] | 7.3 | Ethernet | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | Datacenter | Datacenter | Datacenter | No | 7, 8 | 12, 15 |
| ||||||||||
Appliance series [1][2][3][5][6] | 7.3 | Fibre Channel | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | Datacenter | Datacenter | Datacenter | No | 7, 8 | 12, 15 |
| ||||||||||
Appliance series [1][2][3][7] | 7.4 | Ethernet | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | Datacenter | Datacenter | Datacenter | No | 7, 8 | 12, 15 |
| ||||||||||
Appliance series [1][2][3][5][7] | 7.4 | Fibre Channel | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | Datacenter | Datacenter | Datacenter | No | 7, 8 | 12, 15 |
| ||||||||||
Appliance series [1][3][7] | 7.5 | Ethernet | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | Datacenter | Datacenter | Datacenter | No | 7, 8 | 12, 15 |
| ||||||||||
Appliance series [1][3][5][7] | 7.5 | Fibre Channel | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | Datacenter | Datacenter | Datacenter | No | 7, 8 | 12, 15 |
| ||||||||||
Appliance series [1][3][7] | 7.6 | Ethernet | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | Datacenter | Datacenter | Datacenter | No | 7, 8 | 12, 15 |
| ||||||||||
Appliance series [1][3][5][7] | 7.6 | Fibre Channel | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | Datacenter | Datacenter | Datacenter | No | 7, 8 | 12, 15 |
| ||||||||||
Appliance series [1][3][7] | 7.7 | Ethernet | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | Datacenter | Datacenter | Datacenter | No | 7, 8 | 12, 15 |
| ||||||||||
Appliance series [1][3][5][7] | 7.7 | Fibre Channel | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | Datacenter | Datacenter | Datacenter | No | 7, 8 | 12, 15 |
| ||||||||||
Appliance series [1][3][7][8] | 7.8 | Ethernet | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | Datacenter | Datacenter | Datacenter | No | 7, 8 | 12, 15 |
| ||||||||||
Appliance series [1][3][5][7][8] | 7.8 | Fibre Channel | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | Datacenter | Datacenter | Datacenter | No | 7, 8 | 12, 15 |
| ||||||||||
Appliance series [1][3][7][8] | 7.9 | Ethernet | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | Datacenter | Datacenter | Datacenter | Datacenter | 7, 8 | 12, 15 |
| ||||||||||
Appliance series [1][3][5][7][8] | 7.9 | Fibre Channel | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | Datacenter | Datacenter | Datacenter | Datacenter | 7, 8 | 12, 15 |
| ||||||||||
Appliance series [1][3][7][8] | 7.10 | Ethernet | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | Datacenter | Datacenter | Datacenter | Datacenter | 7, 8, 9 | 12, 15 |
| ||||||||||
Appliance series [1][3][5][7][8] | 7.10 | Fibre Channel | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | Datacenter | Datacenter | Datacenter | Datacenter | 7, 8, 9 | 12, 15 |
| ||||||||||
Appliance series [1][3][7][8] | 7.11 | Ethernet | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | Datacenter | Datacenter | Datacenter | Datacenter | 7, 8, 9 | 12, 15 |
| ||||||||||
Appliance series [1][3][7][8] | 7.12 | Ethernet | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | No | Datacenter | Datacenter | Datacenter | 7, 8, 9 | 12, 15 |
| ||||||||||
Appliance series [1][3][7][8] | 7.13 | Ethernet | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | No | Datacenter | Datacenter | Datacenter | 7, 8, 9 | 12, 15 |
| ||||||||||
Appliance series [1][3][7][8] | 8.0 | Ethernet | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | No | Datacenter | Datacenter | Datacenter | 7, 8, 9 | 12, 15 |
| ||||||||||
Appliance series [1][3][7][8] | 8.1 | Ethernet | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | No | Datacenter | Datacenter | Datacenter | 8, 9 [9] | 12, 15 |
| ||||||||||
Appliance series [1][3][8] | 8.3 | Ethernet | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | No | Datacenter | Datacenter | Datacenter | 8, 9 | 12, 15 |
| ||||||||||
Virtual Edition (VMware) [1][2][3][4][10] | 7.2 | Ethernet | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | Datacenter | Datacenter | Datacenter | No | 7, 8 | 12, 15 |
| ||||||||||
Virtual Edition (VMware) [1][2][3][6][10] | 7.3 | Ethernet | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | Datacenter | Datacenter | Datacenter | No | 7, 8 | 12, 15 |
| ||||||||||
Virtual Edition (VMware) [1][2][3][7][10] | 7.4 | Ethernet | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | Datacenter | Datacenter | Datacenter | No | 7, 8 | 12, 15 |
| ||||||||||
Virtual Edition (VMware) [1][3][7][10] | 7.5 | Ethernet | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | Datacenter | Datacenter | Datacenter | No | 7, 8 | 12, 15 |
| ||||||||||
Virtual Edition (VMware) [1][3][7][10] | 7.6 | Ethernet | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | Datacenter | Datacenter | Datacenter | No | 7, 8 | 12, 15 |
| ||||||||||
Virtual Edition (VMware) [1][3][7][10] | 7.7 | Ethernet | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | Datacenter | Datacenter | Datacenter | No | 7, 8 | 12, 15 |
| ||||||||||
Virtual Edition (VMware) [1][3][7][8][10] | 7.8 | Ethernet | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | Datacenter | Datacenter | Datacenter | No | 7, 8 | 12, 15 |
| ||||||||||
Virtual Edition (VMware) [1][3][7][8][10] | 7.9 | Ethernet | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | Datacenter | Datacenter | Datacenter | Datacenter | 7, 8 | 12, 15 |
| ||||||||||
Virtual Edition (VMware) [1][3][7][8][10] | 7.10 | Ethernet | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | Datacenter | Datacenter | Datacenter | Datacenter | 7, 8, 9 | 12, 15 |
| ||||||||||
Virtual Edition (VMware) [1][3][7][8][10] | 7.11 | Ethernet | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | Datacenter | Datacenter | Datacenter | Datacenter | 7, 8, 9 | 12, 15 |
| ||||||||||
Virtual Edition (VMware) [1][3][7][8][10] | 7.12 | Ethernet | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | No | Datacenter | Datacenter | Datacenter | 7, 8, 9 | 12, 15 |
| ||||||||||
Virtual Edition (VMware) [1][3][7][8][10] | 7.13 | Ethernet | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | No | Datacenter | Datacenter | Datacenter | 7, 8, 9 | 12, 15 |
| ||||||||||
Virtual Edition (VMware) [1][3][7][8][10] | 8.0 | Ethernet | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | No | Datacenter | Datacenter | Datacenter | 7, 8, 9 | 12, 15 |
| ||||||||||
Virtual Edition (VMware) [1][3][7][8][10] | 8.1 | Ethernet | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | No | Datacenter | Datacenter | Datacenter | 8, 9 [9] | 12, 15 |
| ||||||||||
Virtual Edition (VMware) [1][3][8][10] | 8.3 | Ethernet | Yes | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WI_Opt_Dup, WORM | No | Datacenter | Datacenter | Datacenter | 8, 9 | 12, 15 |
|
- IPv6 is supported with NetBackup 8.1.1 and later.
- Supported with NetBackup 9.0 and later only when upgrading from an earlier NetBackup version on which the plug-in is running. If the plug-in needs to be reinstalled after upgrading NetBackup to 9.0 or later, you must install plug-in version 7.5 or later.
- Targeted A.I.R. is supported in One-to-One, One-to-Many, and Many-to-One configurations.
- WORM support requires plug-in version 7.2.0.50 or later and NetBackup 8.3.0.1 or later.
- When running Targeted A.I.R. over Fibre Channel, Windows is only supported as a target domain.
- WORM support requires plug-in version 7.3.0.10 or later and NetBackup 8.3.0.1 or later.
- WORM support requires NetBackup 8.3.0.1 or later.
- Supports PowerProtect Smart Scale, however T-AIR functionality is not supported in this release of Smart Scale.
- Epic-Large-File (ELF) policy type is supported with NetBackup 10.5 and later. For more information, refer About the Epic-Large-File policy type.
- This device is a virtual appliance. For compatible versions of VMware, see Dell EMC Data Domain's and VMware's compatibility lists.
Dell EMC Data Domain - Family Membership
Storage Server Family | Members |
---|---|
Appliance series | DD2200, DD2500, DD3300, DD4200, DD4500, DD6300, DD6400, DD6800, DD6900, DD7200, DD9300, DD9400, DD9500, DD9800, DD9900 |
ExaGrid
ExaGrid - Support with NetBackup Appliance
Storage Server Family | Plug-in | Data Interface | IPv6 | Supported OpenStorage Functionality | 5200 Series | 5300 Series |
---|---|---|---|---|---|---|
EX series [1][2][3][4] | V11.5.0 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R. | Yes | Yes |
|
- Accelerator support requires ExaGrid software version 5.2.2 or later.
- Optimized Duplication (Opt_Dup) may fail on NetBackup 10.1, for more information and solution, refer: Optimized Duplication fails with status 191
- Pooled OST Shares feature requires ExaGrid software version 6.1.1 or later, simplifying OST device setup and management.
- Targeted A.I.R. is supported in One-to-One, One-to-Many, and Many-to-One configurations.
ExaGrid - Support with Windows / Linux
Storage Server Family | Plug-in | Data Interface | IPv6 | Supported OpenStorage Functionality | Windows Server 2012 x64 | Windows Server 2016 x64 | Windows Server 2019 x64 | Windows Server 2022 x64 | Red Hat Enterprise Linux on x86-64 |
---|---|---|---|---|---|---|---|---|---|
EX series [1][2] | V11.4.1 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R. | Datacenter | Datacenter | No | No | 7 |
| |||||||||
EX series [1][2][3][4] | V11.5.0 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R. | Datacenter | Datacenter | Datacenter | Datacenter | 7, 8, 9 |
|
- Accelerator support requires ExaGrid software version 5.2.2 or later.
- Targeted A.I.R. is supported in One-to-One, One-to-Many, and Many-to-One configurations.
- Optimized Duplication (Opt_Dup) may fail on NetBackup 10.1, for more information and solution, refer: Optimized Duplication fails with status 191
- Pooled OST Shares feature requires ExaGrid software version 6.1.1 or later, simplifying OST device setup and management.
ExaGrid - Family Membership
Storage Server Family | Members |
---|---|
EX series | All Models |
FalconStor
FalconStor - Support with NetBackup Appliance
Storage Server Family | Plug-in | Data Interface | IPv6 | Supported OpenStorage Functionality | 5200 Series | 5300 Series |
---|---|---|---|---|---|---|
Virtual Tape Library (VTL) series | 9 | Ethernet | No | A.I.R., Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R. | Yes | Yes |
Virtual Tape Library (VTL) series | 9 | Fibre Channel | No | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Direct_Copy_Shared, Opt_Dup, Opt_Synth, Targeted_A.I.R. | Yes | Yes |
FalconStor - Support with Windows / Linux
Storage Server Family | Plug-in | Data Interface | IPv6 | Supported OpenStorage Functionality | Windows Server 2012 x64 | Windows Server 2016 x64 | Red Hat Enterprise Linux on x86-64 | SUSE Linux Enterprise Server on x86-64 |
---|---|---|---|---|---|---|---|---|
Virtual Tape Library (VTL) series | 9 | Ethernet | No | A.I.R., Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R. | Datacenter | Datacenter | 7 | 12 |
Virtual Tape Library (VTL) series | 9 | Fibre Channel | No | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Direct_Copy_Shared, Opt_Dup, Opt_Synth, Targeted_A.I.R. | Datacenter | Datacenter | 7 | 12 |
FalconStor - Family Membership
Storage Server Family | Members |
---|---|
Virtual Tape Library (VTL) series | VTL-G, VTL-S, VTL-V |
Fujitsu
Fujitsu - Support with NetBackup Appliance
Storage Server Family | Plug-in | Data Interface | IPv6 | Supported OpenStorage Functionality | 5200 Series | 5300 Series |
---|---|---|---|---|---|---|
ETERNUS CS800 ENTERPRISE | 10.0 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth | Yes | Yes |
ETERNUS CS800 ENTRY | 10.0 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, KMS, Opt_Dup, Opt_Synth | Yes | Yes |
ETERNUS CS800 M1 [1][2] | 11.0 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WORM | Yes | Yes |
| ||||||
ETERNUS CS800 Reference Architecture [1][2][3] | 11.0 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WORM | Yes | Yes |
| ||||||
ETERNUS CS800 S3 | 3.1 | Ethernet | No | A.I.R., Direct_Copy_Shared, KMS, Opt_Dup, Opt_Synth | Yes | Yes |
ETERNUS CS800 S4 | 3.1 | Ethernet | No | A.I.R., Direct_Copy_Shared, KMS, Opt_Dup, Opt_Synth | Yes | Yes |
ETERNUS CS800 S4 | 10.0 | Ethernet | No | A.I.R., Direct_Copy_Shared, KMS, Opt_Dup, Opt_Synth | Yes | Yes |
ETERNUS CS800 S5 | 3.1 | Ethernet | No | A.I.R., Direct_Copy_Shared, KMS, Opt_Dup, Opt_Synth | Yes | Yes |
ETERNUS CS800 S5 | 10.0 | Ethernet | No | A.I.R., Direct_Copy_Shared, KMS, Opt_Dup, Opt_Synth | Yes | Yes |
ETERNUS CS800 S6 | 3.1 | Ethernet | No | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, KMS, Opt_Dup, Opt_Synth | Yes | Yes |
ETERNUS CS800 S6 | 10.0 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, KMS, Opt_Dup, Opt_Synth | Yes | Yes |
ETERNUS CS800 S7 | 10.0 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, KMS, Opt_Dup, Opt_Synth | Yes | Yes |
ETERNUS CS800 SCALE | 10.0 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, KMS, Opt_Dup, Opt_Synth | Yes | Yes |
- Targeted A.I.R. support requires Fujitsu OS 4.1 or later.
- WORM support requires plug-in version 11.0.0-4724 or later, Fujitsu OS 4.5.2 or later and NetBackup 8.3.0.1 or later.
- This device uses Quantum V5000 Software Stack on Fujitsu Server PRIMERGY.
Fujitsu - Support with Windows / Linux
Storage Server Family | Plug-in | Data Interface | IPv6 | Supported OpenStorage Functionality | Windows Server 2012 x64 | Windows Server 2016 x64 | Windows Server 2019 x64 | Windows Server 2022 x64 | Red Hat Enterprise Linux on x86-64 | SUSE Linux Enterprise Server on x86-64 |
---|---|---|---|---|---|---|---|---|---|---|
ETERNUS CS800 ENTERPRISE | 10.0 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth | Datacenter | Datacenter | Datacenter | No | 7 | 12, 15 |
ETERNUS CS800 ENTRY | 10.0 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, KMS, Opt_Dup, Opt_Synth | Datacenter | Datacenter | Datacenter | No | 7 | 12, 15 |
ETERNUS CS800 M1 [1][2] | 11.0 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WORM | No | Datacenter | Datacenter | Datacenter | 7, 8 | No |
| ||||||||||
ETERNUS CS800 Reference Architecture [1][2][3] | 11.0 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WORM | No | Datacenter | Datacenter | Datacenter | 7, 8 | No |
| ||||||||||
ETERNUS CS800 S3 | 2.9 | Ethernet | No | A.I.R., Direct_Copy_Shared, KMS, Opt_Dup, Opt_Synth | Datacenter | No | No | No | No | No |
ETERNUS CS800 S3 | 3.1 | Ethernet | No | A.I.R., Direct_Copy_Shared, KMS, Opt_Dup, Opt_Synth | Datacenter | No | No | No | 7 | 12 |
ETERNUS CS800 S4 | 2.9 | Ethernet | No | A.I.R., Direct_Copy_Shared, KMS, Opt_Dup, Opt_Synth | Datacenter | No | No | No | No | No |
ETERNUS CS800 S4 | 3.1 | Ethernet | No | A.I.R., Direct_Copy_Shared, KMS, Opt_Dup, Opt_Synth | Datacenter | No | No | No | 7 | 12 |
ETERNUS CS800 S4 | 10.0 | Ethernet | No | A.I.R., Direct_Copy_Shared, KMS, Opt_Dup, Opt_Synth | Datacenter | No | No | No | 7 | 12 |
ETERNUS CS800 S5 | 2.9 | Ethernet | No | A.I.R., Direct_Copy_Shared, KMS, Opt_Dup, Opt_Synth | Datacenter | No | No | No | No | No |
ETERNUS CS800 S5 | 3.1 | Ethernet | No | A.I.R., Direct_Copy_Shared, KMS, Opt_Dup, Opt_Synth | Datacenter | No | No | No | 7 | 12 |
ETERNUS CS800 S5 | 10.0 | Ethernet | No | A.I.R., Direct_Copy_Shared, KMS, Opt_Dup, Opt_Synth | Datacenter | Datacenter | No | No | 7 | 12 |
ETERNUS CS800 S6 | 3.1 | Ethernet | No | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, KMS, Opt_Dup, Opt_Synth | Datacenter | No | No | No | 7 | 12 |
ETERNUS CS800 S6 | 10.0 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, KMS, Opt_Dup, Opt_Synth | Datacenter | Datacenter | No | No | 7 | 12 |
ETERNUS CS800 S7 | 10.0 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, KMS, Opt_Dup, Opt_Synth | Datacenter | Datacenter | No | No | 7 | 12 |
ETERNUS CS800 SCALE | 10.0 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, KMS, Opt_Dup, Opt_Synth | Datacenter | Datacenter | Datacenter | No | 7 | 12, 15 |
ETERNUS CS8000 series | 1.0 | Ethernet | No | Opt_Dup | No | No | No | No | 7 | 12 |
ETERNUS CS8000 series | 1.1 | Ethernet | No | Opt_Dup | Datacenter | No | No | No | 7 | 12 |
- Targeted A.I.R. support requires Fujitsu OS 4.1 or later.
- WORM support requires plug-in version 11.0.0-4724 or later, Fujitsu OS 4.5.2 or later and NetBackup 8.3.0.1 or later.
- This device uses Quantum V5000 Software Stack on Fujitsu Server PRIMERGY.
Fujitsu - Family Membership
Storage Server Family | Members |
---|---|
ETERNUS CS8000 series | ETERNUS CS8050, ETERNUS CS8200, ETERNUS CS8400, ETERNUS CS8800 |
H3C
H3C - Support with NetBackup Appliance
Storage Server Family | Plug-in | Data Interface | IPv6 | Supported OpenStorage Functionality | 5200 Series | 5300 Series |
---|---|---|---|---|---|---|
CP3310 [1][2] | 4.0 | Ethernet | No | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Yes | Yes |
| ||||||
CP3352 [1][2] | 4.0 | Ethernet | No | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Yes | Yes |
| ||||||
CP3352 [1][2][3] | 4.0 | Fibre Channel | No | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Yes | Yes |
| ||||||
CP3354 [1][2] | 4.0 | Ethernet | No | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Yes | Yes |
| ||||||
CP3354 [1][2][3] | 4.0 | Fibre Channel | No | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Yes | Yes |
| ||||||
CP5510 [1][2] | 4.0 | Ethernet | No | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Yes | Yes |
| ||||||
CP5510 [1][2][3] | 4.0 | Fibre Channel | No | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Yes | Yes |
| ||||||
CP5550 [1][2] | 4.0 | Ethernet | No | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Yes | Yes |
| ||||||
CP5550 [1][2][3] | 4.0 | Fibre Channel | No | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Yes | Yes |
| ||||||
CP6660 [1][2] | 4.0 | Ethernet | No | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Yes | Yes |
| ||||||
CP6660 [1][2][3] | 4.0 | Fibre Channel | No | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Yes | Yes |
|
- Accelerator with NDMP support requires StoreOnce plug-in version 4.0.1 or later and StoreOnce software version 3.13.3 or later.
- Instant Recovery with VMware support requires StoreOnce software version 3.15.1 or later.
- Optimized Duplication and Whole Image Optimized Duplication over Fibre Channel support requires StoreOnce software version 3.16 or later.
H3C - Support with Windows / Linux
Storage Server Family | Plug-in | Data Interface | IPv6 | Supported OpenStorage Functionality | Windows Server 2012 x64 | Red Hat Enterprise Linux on x86-64 | SUSE Linux Enterprise Server on x86-64 |
---|---|---|---|---|---|---|---|
CP3310 [1][2] | 4.0 | Ethernet | No | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Datacenter | 7 | 12 |
| |||||||
CP3352 [1][2] | 4.0 | Ethernet | No | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Datacenter | 7 | 12 |
| |||||||
CP3352 [1][2][3] | 4.0 | Fibre Channel | No | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Datacenter | 7 | 12 [4] |
| |||||||
CP3354 [1][2] | 4.0 | Ethernet | No | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Datacenter | 7 | 12 |
| |||||||
CP3354 [1][2][3] | 4.0 | Fibre Channel | No | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Datacenter | 7 | 12 [4] |
| |||||||
CP5510 [1][2] | 4.0 | Ethernet | No | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Datacenter | 7 | 12 |
| |||||||
CP5510 [1][2][3] | 4.0 | Fibre Channel | No | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Datacenter | 7 | 12 [4] |
| |||||||
CP5550 [1][2] | 4.0 | Ethernet | No | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Datacenter | 7 | 12 |
| |||||||
CP5550 [1][2][3] | 4.0 | Fibre Channel | No | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Datacenter | 7 | 12 [4] |
| |||||||
CP6660 [1][2] | 4.0 | Ethernet | No | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Datacenter | 7 | 12 |
| |||||||
CP6660 [1][2][3] | 4.0 | Fibre Channel | No | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Datacenter | 7 | 12 [4] |
|
- Accelerator with NDMP support requires StoreOnce plug-in version 4.0.1 or later and StoreOnce software version 3.13.3 or later.
- Instant Recovery with VMware support requires StoreOnce software version 3.15.1 or later.
- Optimized Duplication and Whole Image Optimized Duplication over Fibre Channel support requires StoreOnce software version 3.16 or later.
- Fibre Channel data path is supported on SLES 11 GA through SP2 with StoreOnce software versions earlier than 3.13.1. Fibre Channel data path is supported on SLES 11 SP3 and later updates with StoreOnce software versions 3.13.1 or later.
Hewlett Packard Enterprise
Hewlett Packard Enterprise - Support with NetBackup Appliance and Flex Appliance
Storage Server Family | Plug-in | Data Interface | IPv6 | Supported OpenStorage Functionality | 5200 Series | 5300 Series |
---|---|---|---|---|---|---|
StoreOnce 2000 series [1][2] | 4.0 | Ethernet | No | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Yes | Yes |
| ||||||
StoreOnce 2000 series [2][3] | 4.2 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Yes | Yes |
| ||||||
StoreOnce 2000 series [2][3][4] | 4.3 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Yes | Yes |
| ||||||
StoreOnce 3000 series [1][2] | 4.0 | Ethernet | No | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Yes | Yes |
| ||||||
StoreOnce 3000 series [2][3] | 4.2 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Yes | Yes |
| ||||||
StoreOnce 3000 series [2][3][4] | 4.3 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Yes | Yes |
| ||||||
StoreOnce 3500/3600 series [1][2] | 4.0 | Ethernet | No | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Yes | Yes |
| ||||||
StoreOnce 3500/3600 series [1][2][5] | 4.0 | Fibre Channel | No | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Yes | Yes |
| ||||||
StoreOnce 3500/3600 series [2][3] | 4.2 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Yes | Yes |
| ||||||
StoreOnce 3500/3600 series [2][3] | 4.2 | Fibre Channel | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Yes | Yes |
| ||||||
StoreOnce 3500/3600 series [2][3][4][6] | 4.3 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Yes | Yes |
| ||||||
StoreOnce 3500/3600 series [2][3][4][5][6] | 4.3 | Fibre Channel | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Yes | Yes |
| ||||||
StoreOnce 3500/3600 series [2][3][4][7] | 4.4 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup, WORM | Yes | Yes |
| ||||||
StoreOnce 3500/3600 series [2][3][4][7] | 4.4 | Fibre Channel | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup, WORM | Yes | Yes |
| ||||||
StoreOnce 4000 series [1][2] | 4.0 | Ethernet | No | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Yes | Yes |
| ||||||
StoreOnce 4000 series [1][2][5] | 4.0 | Fibre Channel | No | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Yes | Yes |
| ||||||
StoreOnce 4000 series [2][3] | 4.2 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Yes | Yes |
| ||||||
StoreOnce 4000 series [2][3] | 4.2 | Fibre Channel | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Yes | Yes |
| ||||||
StoreOnce 4000 series [2][3][4] | 4.3 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Yes | Yes |
| ||||||
StoreOnce 4000 series [2][3][4][5] | 4.3 | Fibre Channel | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Yes | Yes |
| ||||||
StoreOnce 5000 series [1][2] | 4.0 | Ethernet | No | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Yes | Yes |
| ||||||
StoreOnce 5000 series [1][2][5] | 4.0 | Fibre Channel | No | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Yes | Yes |
| ||||||
StoreOnce 5000 series [2][3] | 4.2 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Yes | Yes |
| ||||||
StoreOnce 5000 series [2][3] | 4.2 | Fibre Channel | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Yes | Yes |
| ||||||
StoreOnce 5000 series [2][3][4][6] | 4.3 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Yes | Yes |
| ||||||
StoreOnce 5000 series [2][3][4][5][6] | 4.3 | Fibre Channel | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Yes | Yes |
| ||||||
StoreOnce 5000 series [2][3][4][7] | 4.4 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup, WORM | Yes | Yes |
| ||||||
StoreOnce 5000 series [2][3][4][7] | 4.4 | Fibre Channel | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup, WORM | Yes | Yes |
| ||||||
StoreOnce 6000 series [1][2] | 4.0 | Ethernet | No | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Yes | Yes |
| ||||||
StoreOnce 6000 series [1][2][5] | 4.0 | Fibre Channel | No | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Yes | Yes |
| ||||||
StoreOnce 6000 series [2][3] | 4.2 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Yes | Yes |
| ||||||
StoreOnce 6000 series [2][3] | 4.2 | Fibre Channel | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Yes | Yes |
| ||||||
StoreOnce 6000 series [2][3][4] | 4.3 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Yes | Yes |
| ||||||
StoreOnce 6000 series [2][3][4][5] | 4.3 | Fibre Channel | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Yes | Yes |
| ||||||
StoreOnce VSA (Hyper-V) [2][3] | 4.2 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Yes | Yes |
| ||||||
StoreOnce VSA (Hyper-V) [2][3][4] | 4.3 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Yes | Yes |
| ||||||
StoreOnce VSA (VMware) [1][2][8] | 4.0 | Ethernet | No | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Yes | Yes |
| ||||||
StoreOnce VSA (VMware) [2][3][8] | 4.2 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Yes | Yes |
| ||||||
StoreOnce VSA (VMware) [2][3][4][6][8] | 4.3 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Yes | Yes |
| ||||||
StoreOnce VSA (VMware) [2][3][4][7][8] | 4.4 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup, WORM | Yes | Yes |
|
- Accelerator with NDMP support requires StoreOnce plug-in version 4.0.1 or later and StoreOnce software version 3.13.3 or later.
- Instant Recovery with VMware support requires StoreOnce software version 3.15.1 or later.
- Reverse A.I.R. is supported with this solution. For more information on replicating an image back to the source primary server, see Auto Image Replication (AIR): How To move a copy of an image back to the source
- This device supports concurrent backups to OST storage servers and to VTL emulated tape drives.
- Optimized Duplication and Whole Image Optimized Duplication over Fibre Channel support requires StoreOnce software version 3.16 or later.
- Support on Windows server requires NetBackup 8.3.0.1 or later.
- WORM support requires plug-in version 4.4.0 or later, StoreOnce software version 4.3.2-2221.21 or later and NetBackup 8.3.0.1 or later.
- This device is a virtual appliance. For compatible versions of VMware, see Hewlett Packard Enterprise's and VMware's compatibility lists.
Hewlett Packard Enterprise - Support with Windows / Linux
Storage Server Family | Plug-in | Data Interface | IPv6 | Supported OpenStorage Functionality | Windows Server 2012 x64 | Windows Server 2016 x64 | Windows Server 2019 x64 | Windows Server 2022 x64 | Red Hat Enterprise Linux on x86-64 | SUSE Linux Enterprise Server on x86-64 |
---|---|---|---|---|---|---|---|---|---|---|
StoreOnce 2000 series [1][2] | 4.0 | Ethernet | No | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Datacenter | No | No | No | 7 | 12 |
| ||||||||||
StoreOnce 2000 series [2][3] | 4.2 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Datacenter | Datacenter | Datacenter | No | 7 [4] | 12, 15 |
| ||||||||||
StoreOnce 2000 series [2][3][5] | 4.3 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | No | No | No | No | 7, 8 | 12, 15 |
| ||||||||||
StoreOnce 3000 series [1][2] | 4.0 | Ethernet | No | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Datacenter | No | No | No | 7 | 12 |
| ||||||||||
StoreOnce 3000 series [2][3] | 4.2 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Datacenter | Datacenter | Datacenter | No | 7 [4] | 12, 15 |
| ||||||||||
StoreOnce 3000 series [2][3][5] | 4.3 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | No | No | No | No | 7, 8 | 12, 15 |
| ||||||||||
StoreOnce 3500/3600 series [1][2] | 4.0 | Ethernet | No | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Datacenter | No | No | No | 7 | 12 |
| ||||||||||
StoreOnce 3500/3600 series [1][2][6] | 4.0 | Fibre Channel | No | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Datacenter | No | No | No | 7 | 12 [7] |
| ||||||||||
StoreOnce 3500/3600 series [2][3] | 4.2 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Datacenter | Datacenter | Datacenter | No | 7 [4] | 12, 15 |
| ||||||||||
StoreOnce 3500/3600 series [2][3] | 4.2 | Fibre Channel | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Datacenter | Datacenter | No | No | 7 [4] | 12 |
| ||||||||||
StoreOnce 3500/3600 series [2][3][5][8] | 4.3 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Datacenter | Datacenter | Datacenter | Datacenter | 7, 8 | 12, 15 |
| ||||||||||
StoreOnce 3500/3600 series [2][3][5][6][8] | 4.3 | Fibre Channel | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | No | No | No | No | 7, 8 | 12, 15 |
| ||||||||||
StoreOnce 3500/3600 series [2][3][5][9] | 4.4 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup, WORM | No | Datacenter | Datacenter | Datacenter | 7, 8 | 12, 15 |
| ||||||||||
StoreOnce 3500/3600 series [2][3][5][9] | 4.4 | Fibre Channel | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup, WORM | No | Datacenter | Datacenter | Datacenter | 7, 8 | 12, 15 |
| ||||||||||
StoreOnce 4000 series [1][2] | 4.0 | Ethernet | No | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Datacenter | No | No | No | 7 | 12 |
| ||||||||||
StoreOnce 4000 series [1][2][6] | 4.0 | Fibre Channel | No | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Datacenter | No | No | No | 7 | 12 |
| ||||||||||
StoreOnce 4000 series [2][3] | 4.2 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Datacenter | Datacenter | Datacenter | No | 7 [4] | 12, 15 |
| ||||||||||
StoreOnce 4000 series [2][3] | 4.2 | Fibre Channel | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Datacenter | Datacenter | No | No | 7 [4] | 12 |
| ||||||||||
StoreOnce 4000 series [2][3][5] | 4.3 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | No | No | No | No | 7, 8 | 12, 15 |
| ||||||||||
StoreOnce 4000 series [2][3][5][6] | 4.3 | Fibre Channel | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | No | No | No | No | 7, 8 | 12, 15 |
| ||||||||||
StoreOnce 5000 series [1][2] | 4.0 | Ethernet | No | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Datacenter | No | No | No | 7 | 12 |
| ||||||||||
StoreOnce 5000 series [1][2][6] | 4.0 | Fibre Channel | No | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Datacenter | No | No | No | 7 | 12 |
| ||||||||||
StoreOnce 5000 series [2][3] | 4.2 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Datacenter | Datacenter | Datacenter | No | 7 [4] | 12, 15 |
| ||||||||||
StoreOnce 5000 series [2][3] | 4.2 | Fibre Channel | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Datacenter | Datacenter | No | No | 7 [4] | 12 |
| ||||||||||
StoreOnce 5000 series [2][3][5][8] | 4.3 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Datacenter | Datacenter | Datacenter | Datacenter | 7, 8 | 12, 15 |
| ||||||||||
StoreOnce 5000 series [2][3][5][6][8] | 4.3 | Fibre Channel | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | No | No | No | No | 7, 8 | 12, 15 |
| ||||||||||
StoreOnce 5000 series [2][3][5][9] | 4.4 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup, WORM | No | Datacenter | Datacenter | Datacenter | 7, 8 | 12, 15 |
| ||||||||||
StoreOnce 5000 series [2][3][5][9] | 4.4 | Fibre Channel | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup, WORM | No | Datacenter | Datacenter | Datacenter | 7, 8 | 12, 15 |
| ||||||||||
StoreOnce 6000 series [1][2] | 4.0 | Ethernet | No | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Datacenter | No | No | No | 7 | 12 |
| ||||||||||
StoreOnce 6000 series [1][2][6] | 4.0 | Fibre Channel | No | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Datacenter | No | No | No | 7 | 12 |
| ||||||||||
StoreOnce 6000 series [2][3] | 4.2 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Datacenter | Datacenter | Datacenter | No | 7 [4] | 12, 15 |
| ||||||||||
StoreOnce 6000 series [2][3] | 4.2 | Fibre Channel | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Datacenter | Datacenter | No | No | 7 [4] | 12 |
| ||||||||||
StoreOnce 6000 series [2][3][5] | 4.3 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | No | No | No | No | 7, 8 | 12, 15 |
| ||||||||||
StoreOnce 6000 series [2][3][5][6] | 4.3 | Fibre Channel | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | No | No | No | No | 7, 8 | 12, 15 |
| ||||||||||
StoreOnce VSA (Hyper-V) [2][3] | 4.2 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Datacenter | Datacenter | Datacenter | No | 7 [4] | 12, 15 |
| ||||||||||
StoreOnce VSA (Hyper-V) [2][3][5] | 4.3 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | No | No | No | No | 7, 8 | 12, 15 |
| ||||||||||
StoreOnce VSA (VMware) [1][2][10] | 4.0 | Ethernet | No | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Datacenter | No | No | No | 7 | 12 |
| ||||||||||
StoreOnce VSA (VMware) [2][3][10] | 4.2 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Datacenter | Datacenter | Datacenter | No | 7 [4] | 12, 15 |
| ||||||||||
StoreOnce VSA (VMware) [2][3][5][8][10] | 4.3 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup | Datacenter | Datacenter | Datacenter | Datacenter | 7, 8 | 12, 15 |
| ||||||||||
StoreOnce VSA (VMware) [2][3][5][9][10] | 4.4 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Targeted_A.I.R., WI_Opt_Dup, WORM | No | Datacenter | Datacenter | Datacenter | 7, 8 | 12, 15 |
|
- Accelerator with NDMP support requires StoreOnce plug-in version 4.0.1 or later and StoreOnce software version 3.13.3 or later.
- Instant Recovery with VMware support requires StoreOnce software version 3.15.1 or later.
- Reverse A.I.R. is supported with this solution. For more information on replicating an image back to the source primary server, see Auto Image Replication (AIR): How To move a copy of an image back to the source
- The Red Hat plug-in is also supported with CentOS 7.
- This device supports concurrent backups to OST storage servers and to VTL emulated tape drives.
- Optimized Duplication and Whole Image Optimized Duplication over Fibre Channel support requires StoreOnce software version 3.16 or later.
- Fibre Channel data path is supported on SLES 11 GA through SP2 with StoreOnce software versions earlier than 3.13.1. Fibre Channel data path is supported on SLES 11 SP3 and later updates with StoreOnce software versions 3.13.1 or later.
- Support on Windows server requires NetBackup 8.3.0.1 or later.
- WORM support requires plug-in version 4.4.0 or later, StoreOnce software version 4.3.2-2221.21 or later and NetBackup 8.3.0.1 or later.
- This device is a virtual appliance. For compatible versions of VMware, see Hewlett Packard Enterprise's and VMware's compatibility lists.
Hewlett Packard Enterprise - Family Membership
Storage Server Family | Members |
---|---|
StoreOnce 2000 series | StoreOnce 2610, StoreOnce 2620, StoreOnce 2700, StoreOnce 2900 |
StoreOnce 3000 series | StoreOnce 3100 |
StoreOnce 3500/3600 series | StoreOnce 3520, StoreOnce 3540, StoreOnce 3620, StoreOnce 3640, StoreOnce 3660 |
StoreOnce 4000 series | StoreOnce 4210fc, StoreOnce 4210i, StoreOnce 4220, StoreOnce 4420, StoreOnce 4430, StoreOnce 4500, StoreOnce 4700, StoreOnce 4900 |
StoreOnce 5000 series | StoreOnce 5100, StoreOnce 5200, StoreOnce 5250, StoreOnce 5500, StoreOnce 5650 |
StoreOnce 6000 series | StoreOnce 6500, StoreOnce 6600, StoreOnce B6200 |
Infinidat
Infinidat - Support with NetBackup Appliance
Storage Server Family | Plug-in | Data Interface | IPv6 | Supported OpenStorage Functionality | 5200 Series | 5300 Series |
---|---|---|---|---|---|---|
InfiniGuard B-series | 10.0 | Ethernet | No | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, KMS, Opt_Dup, Opt_Synth | Yes | Yes |
Infinidat - Support with Windows / Linux
Storage Server Family | Plug-in | Data Interface | IPv6 | Supported OpenStorage Functionality | Windows Server 2012 x64 | Windows Server 2016 x64 | Windows Server 2019 x64 | Windows Server 2022 x64 | Red Hat Enterprise Linux on x86-64 | SUSE Linux Enterprise Server on x86-64 |
---|---|---|---|---|---|---|---|---|---|---|
InfiniGuard B-series | 10.0 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, KMS, Opt_Dup, Opt_Synth | Datacenter | Datacenter | Datacenter | No | 7 | 12, 15 |
InfiniGuard B-series | 10.1 | Ethernet | No | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, KMS, Opt_Dup, Opt_Synth | Datacenter | Datacenter | Datacenter | Datacenter | 7, 8 | 12, 15 |
InfiniGuard B-series [1] | 11.0 | Ethernet | No | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, KMS, Opt_Dup, Opt_Synth, Targeted_A.I.R., WORM | Datacenter | Datacenter | Datacenter | Datacenter | 7, 8 | No |
|
- Targeted_A.I.R support on NetBackup 10.1 and NetBackup 10.1.1 requires Emergency Engineering Binary (EEB). Contact Veritas Support and ask for the EEB associated with Etrack 4092071 for NetBackup 10.1 and Etrack 4105018 for NetBackup 10.1.1.
Infinidat - Family Membership
Storage Server Family | Members |
---|---|
InfiniGuard B-series | InfiniGuard B4212N, InfiniGuard B4260, InfiniGuard B4260N, InfiniGuard B4306, InfiniGuard B4312, InfiniGuard B4320 |
NEC
NEC - Support with Windows / Linux
Storage Server Family | Plug-in | Data Interface | IPv6 | Supported OpenStorage Functionality | Windows Server 2012 x64 | Windows Server 2016 x64 | Windows Server 2019 x64 | Windows Server 2022 x64 | Red Hat Enterprise Linux on x86-64 | SUSE Linux Enterprise Server on x86-64 |
---|---|---|---|---|---|---|---|---|---|---|
HYDRAstor HS3 and HS8 (4th Gen), iStorage HS3 and HS8 (4th Gen) and NEC Storage HS3 and HS8 (4th Gen) [1] | 2.9 | Ethernet | No | A.I.R., Opt_Dup, Opt_Synth | Datacenter | No | No | No | No | No |
| ||||||||||
HYDRAstor HS3 and HS8 (4th Gen), iStorage HS3 and HS8 (4th Gen) and NEC Storage HS3 and HS8 (4th Gen) [1] | 2.10 | Ethernet | No | A.I.R., Opt_Dup, Opt_Synth | Datacenter | No | No | No | No | No |
| ||||||||||
HYDRAstor HS3 and HS8 (4th Gen), iStorage HS3 and HS8 (4th Gen) and NEC Storage HS3 and HS8 (4th Gen) [1] | 2.11 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth | Datacenter | Datacenter | Datacenter | No | 7, 8 | 12, 15 |
| ||||||||||
HYDRAstor HS3 and HS8 (4th Gen), iStorage HS3 and HS8 (4th Gen) and NEC Storage HS3 and HS8 (4th Gen) [1][2] | 2.12 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, WORM | No | Datacenter | Datacenter | Datacenter | 7, 8 | 12, 15 |
| ||||||||||
HYDRAstor HS3 and HS8 (5th Gen), iStorage HS3 and HS8 (5th Gen) and NEC Storage HS3 and HS8 (5th Gen) [1] | 2.11 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth | Datacenter | Datacenter | Datacenter | No | 7, 8 | 12, 15 |
| ||||||||||
HYDRAstor HS3 and HS8 (5th Gen), iStorage HS3 and HS8 (5th Gen) and NEC Storage HS3 and HS8 (5th Gen) [1][2] | 2.12 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, WORM | No | Datacenter | Datacenter | Datacenter | 7, 8 | 12, 15 |
| ||||||||||
HYDRAstor HS Virtual Appliance, iStorage HS Virtual Appliance, iStorage HS Lite, and NEC Storage HS Virtual Appliance [1] | 2.11 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth | Datacenter | Datacenter | Datacenter | No | 7, 8 | 12, 15 |
| ||||||||||
HYDRAstor HS Virtual Appliance, iStorage HS Virtual Appliance, iStorage HS Lite, and NEC Storage HS Virtual Appliance [1][2][3] | 2.12 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, WORM | No | Datacenter | Datacenter | Datacenter | 7, 8, 9 | 12, 15 |
|
- Auto Image Replication must be configured according to the "Custom A.I.R. Configuration" specified in NEC's white paper "OpenStorage (OST) Auto Image Replication Setup Guide", which may be obtained from NEC.
- WORM support requires NetBackup 8.3.0.1 or later.
- Support on RHEL 9 requires NetBackup 10.3 or later and NEC OST plug-in 2.12.5 or later.
NEC - Family Membership
Storage Server Family | Members |
---|---|
HYDRAstor HS3 and HS8 (4th Gen), iStorage HS3 and HS8 (4th Gen) and NEC Storage HS3 and HS8 (4th Gen) | HYDRAstor HS3-410, HYDRAstor HS8-4001S, HYDRAstor HS8-4002S, HYDRAstor HS8-4006R, HYDRAstor HS8-4165, iStorage HS3-40, iStorage HS8-40, NEC Storage HS3-40, NEC Storage HS8-40 |
HYDRAstor HS3 and HS8 (5th Gen), iStorage HS3 and HS8 (5th Gen) and NEC Storage HS3 and HS8 (5th Gen) | HYDRAstor HS3-510, HYDRAstor HS8-5000, iStorage HS3-50, iStorage HS8-50, NEC Storage HS3-50, NEC Storage HS8-50 |
HYDRAstor HS Virtual Appliance, iStorage HS Virtual Appliance, iStorage HS Lite, and NEC Storage HS Virtual Appliance | HYDRAstor HS24-514, iStorage HS24-514, NEC Storage HS24-514 |
Oracle
Oracle - Support with Windows / Linux
Storage Server Family | Plug-in | Data Interface | IPv6 | Supported OpenStorage Functionality | Windows Server 2012 x64 | Red Hat Enterprise Linux on x86-64 | SUSE Linux Enterprise Server on x86-64 |
---|---|---|---|---|---|---|---|
ZFS Storage Appliance series | 1.1 | Ethernet | No | Opt_Dup | No | 7 | 12 |
ZFS Storage Appliance series | 1.1 | Fibre Channel | No | Opt_Dup | No | 7 | 12 |
ZFS Storage Appliance series [1] | 2.0 | Ethernet | No | Opt_Dup | Datacenter | 7 | 12 |
| |||||||
ZFS Storage Appliance series [1] | 2.0 | Fibre Channel | No | Opt_Dup | No | 7 | 12 |
|
- Oracle inline deduplication is supported with MS-Windows and Standard backup policy types. Disable inline duplication when using any other backup policy type.
Oracle - Family Membership
Storage Server Family | Members |
---|---|
ZFS Storage Appliance series | ZFS Storage 7110, ZFS Storage 7120, ZFS Storage 7210, ZFS Storage 7310, ZFS Storage 7320, ZFS Storage 7410, ZFS Storage 7420, ZFS Storage 7430, ZFS Storage ZS3-2, ZFS Storage ZS3-4, ZFS Storage ZS4-4, ZFS Storage ZS5-2, ZFS Storage ZS5-4 |
Quantum
Quantum - Support with NetBackup Appliance
Storage Server Family | Plug-in | Data Interface | IPv6 | Supported OpenStorage Functionality | 5200 Series | 5300 Series |
---|---|---|---|---|---|---|
DXi4000 Series | 3.1 | Ethernet | No | A.I.R., Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth | Yes | Yes |
DXi4000 Series | 10.0 | Ethernet | No | A.I.R., Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth | Yes | Yes |
DXi4700 Series [1] | 3.1 | Ethernet | No | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, KMS, Opt_Dup, Opt_Synth | Yes | Yes |
| ||||||
DXi4700 Series [1] | 10.0 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, KMS, Opt_Dup, Opt_Synth | Yes | Yes |
| ||||||
DXi4800 Series [1] | 10.0 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, KMS, Opt_Dup, Opt_Synth | Yes | Yes |
| ||||||
DXi4800 Series [2][3][4] | 10.1 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, KMS, Opt_Dup, Opt_Synth, Targeted_A.I.R. | Yes | Yes |
| ||||||
DXi4800 Series [2][3][4][5] | 11.0 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WORM | Yes | Yes |
| ||||||
DXi6000 Series [6] | 3.1 | Ethernet | No | A.I.R., Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, KMS, Opt_Dup, Opt_Synth | Yes | Yes |
| ||||||
DXi6000 Series [6] | 10.0 | Ethernet | No | A.I.R., Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, KMS, Opt_Dup, Opt_Synth | Yes | Yes |
| ||||||
DXi6700 Series | 3.1 | Ethernet | No | A.I.R., Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, KMS, Opt_Dup, Opt_Synth | Yes | Yes |
DXi6700 Series | 10.0 | Ethernet | No | A.I.R., Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, KMS, Opt_Dup, Opt_Synth | Yes | Yes |
DXi6800 Series [1] | 3.1 | Ethernet | No | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, KMS, Opt_Dup, Opt_Synth | Yes | Yes |
| ||||||
DXi6800 Series [1] | 10.0 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, KMS, Opt_Dup, Opt_Synth | Yes | Yes |
| ||||||
DXi6900 Series [1] | 3.1 | Ethernet | No | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, KMS, Opt_Dup, Opt_Synth | Yes | Yes |
| ||||||
DXi6900 Series [1] | 10.0 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, KMS, Opt_Dup, Opt_Synth | Yes | Yes |
| ||||||
DXi6900 Series [2][3][7] | 10.1 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, KMS, Opt_Dup, Opt_Synth, Targeted_A.I.R. | Yes | Yes |
| ||||||
DXi8500 Series | 3.1 | Ethernet | No | A.I.R., Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, KMS, Opt_Dup, Opt_Synth | Yes | Yes |
DXi8500 Series | 10.0 | Ethernet | No | A.I.R., Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, KMS, Opt_Dup, Opt_Synth | Yes | Yes |
DXi9000 Series [1] | 10.0 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, KMS, Opt_Dup, Opt_Synth | Yes | Yes |
| ||||||
DXi9000 Series [2][3][4] | 10.1 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, KMS, Opt_Dup, Opt_Synth, Targeted_A.I.R. | Yes | Yes |
| ||||||
DXi9000 Series [2][3][4][5] | 11.0 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WORM | Yes | Yes |
| ||||||
DXi T10 Series | 10.0 | Ethernet | No | A.I.R., Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth | Yes | Yes |
DXi T10 Series [2][3][4] | 10.1 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R. | Yes | Yes |
| ||||||
DXi T10 Series [2][3][4][5] | 11.0 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WORM | Yes | Yes |
| ||||||
DXi V Series [8] | 3.1 | Ethernet | No | A.I.R., Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth | Yes | Yes |
| ||||||
DXi V Series [8] | 10.0 | Ethernet | No | A.I.R., Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth | Yes | Yes |
| ||||||
DXi V Series [2][3][4][8] | 10.1 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R. | Yes | Yes |
| ||||||
DXi V Series [2][3][4][5][8] | 11.0 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WORM | Yes | Yes |
|
- Accelerator support requires DXi Software 3.1 or later.
- Reverse A.I.R. is supported with this solution. For more information on replicating an image back to the source primary server, see Auto Image Replication (AIR): How To move a copy of an image back to the source
- Targeted A.I.R. is supported in One-to-One, Many-to-One, and Cascading A.I.R. configurations.
- Targeted A.I.R. support requires DXi Software 4.1 or later.
- WORM support requires plug-in version 11.0.0-4724 or later, Quantum DXi Software 4.5.2 or later and NetBackup 8.3.0.1 or later.
- The Direct Copy to shared tape drives feature (Direct_Copy_Shared) is supported on the DXi6540 and DXi6550 models.
- Targeted A.I.R. support requires DXi Software 3.4.0.5 or later.
- This device is a virtual appliance. For compatible versions of VMware, see Quantum's and VMware's compatibility lists.
Quantum - Support with Windows / Linux
Storage Server Family | Plug-in | Data Interface | IPv6 | Supported OpenStorage Functionality | Windows Server 2012 x64 | Windows Server 2016 x64 | Windows Server 2019 x64 | Windows Server 2022 x64 | Red Hat Enterprise Linux on x86-64 | SUSE Linux Enterprise Server on x86-64 |
---|---|---|---|---|---|---|---|---|---|---|
DXi4000 Series | 2.9 | Ethernet | No | A.I.R., Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth | Datacenter | No | No | No | No | No |
DXi4000 Series | 3.0 | Ethernet | No | A.I.R., Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth | Datacenter | No | No | No | 7 | 12 |
DXi4000 Series | 3.1 | Ethernet | No | A.I.R., Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth | Datacenter | No | No | No | 7 | 12 |
DXi4000 Series | 10.0 | Ethernet | No | A.I.R., Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth | Datacenter | Datacenter | No | No | 7 | 12 |
DXi4700 Series [1] | 2.9 | Ethernet | No | A.I.R., Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, KMS, Opt_Dup, Opt_Synth | Datacenter | No | No | No | No | No |
| ||||||||||
DXi4700 Series [1][2] | 3.0 | Ethernet | No | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, KMS, Opt_Dup, Opt_Synth | Datacenter | No | No | No | No | No |
| ||||||||||
DXi4700 Series [2] | 3.1 | Ethernet | No | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, KMS, Opt_Dup, Opt_Synth | Datacenter | No | No | No | 7 | 12 |
| ||||||||||
DXi4700 Series [2] | 10.0 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, KMS, Opt_Dup, Opt_Synth | Datacenter | Datacenter | Datacenter | No | 7 | 12, 15 |
| ||||||||||
DXi4800 Series [2] | 10.0 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, KMS, Opt_Dup, Opt_Synth | Datacenter | Datacenter | Datacenter | No | 7 | 12, 15 |
| ||||||||||
DXi4800 Series [3][4][5] | 10.1 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, KMS, Opt_Dup, Opt_Synth, Targeted_A.I.R. | Datacenter | Datacenter | Datacenter | No | 7, 8 | 12, 15 |
| ||||||||||
DXi4800 Series [3][4][5][6] | 11.0 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WORM | Datacenter | Datacenter | Datacenter | Datacenter | 7, 8 | No |
| ||||||||||
DXi6000 Series [7] | 2.9 | Ethernet | No | A.I.R., Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, KMS, Opt_Dup, Opt_Synth | Datacenter | No | No | No | No | No |
| ||||||||||
DXi6000 Series [7] | 3.0 | Ethernet | No | A.I.R., Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, KMS, Opt_Dup, Opt_Synth | Datacenter | No | No | No | 7 | 12 |
| ||||||||||
DXi6000 Series [7] | 3.1 | Ethernet | No | A.I.R., Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, KMS, Opt_Dup, Opt_Synth | Datacenter | No | No | No | 7 | 12 |
| ||||||||||
DXi6000 Series [7] | 10.0 | Ethernet | No | A.I.R., Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, KMS, Opt_Dup, Opt_Synth | Datacenter | Datacenter | No | No | 7 | 12 |
| ||||||||||
DXi6700 Series | 2.9 | Ethernet | No | A.I.R., Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, KMS, Opt_Dup, Opt_Synth | Datacenter | No | No | No | No | No |
DXi6700 Series | 3.0 | Ethernet | No | A.I.R., Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, KMS, Opt_Dup, Opt_Synth | Datacenter | No | No | No | 7 | 12 |
DXi6700 Series | 3.1 | Ethernet | No | A.I.R., Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, KMS, Opt_Dup, Opt_Synth | Datacenter | No | No | No | 7 | 12 |
DXi6700 Series | 10.0 | Ethernet | No | A.I.R., Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, KMS, Opt_Dup, Opt_Synth | Datacenter | Datacenter | No | No | 7 | 12 |
DXi6800 Series | 2.9 | Ethernet | No | A.I.R., Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, KMS, Opt_Dup, Opt_Synth | Datacenter | No | No | No | No | No |
DXi6800 Series [2] | 3.0 | Ethernet | No | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, KMS, Opt_Dup, Opt_Synth | Datacenter | No | No | No | No | No |
| ||||||||||
DXi6800 Series [2] | 3.1 | Ethernet | No | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, KMS, Opt_Dup, Opt_Synth | Datacenter | No | No | No | 7 | 12 |
| ||||||||||
DXi6800 Series [2] | 10.0 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, KMS, Opt_Dup, Opt_Synth | Datacenter | Datacenter | Datacenter | No | 7 | 12, 15 |
| ||||||||||
DXi6900 Series [1] | 2.9 | Ethernet | No | A.I.R., Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, KMS, Opt_Dup, Opt_Synth | Datacenter | No | No | No | No | No |
| ||||||||||
DXi6900 Series [2] | 3.0 | Ethernet | No | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, KMS, Opt_Dup, Opt_Synth | Datacenter | No | No | No | No | No |
| ||||||||||
DXi6900 Series [2] | 3.1 | Ethernet | No | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, KMS, Opt_Dup, Opt_Synth | Datacenter | No | No | No | 7 | 12 |
| ||||||||||
DXi6900 Series [2] | 10.0 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, KMS, Opt_Dup, Opt_Synth | Datacenter | Datacenter | Datacenter | No | 7 | 12, 15 |
| ||||||||||
DXi6900 Series [3][4][8] | 10.1 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, KMS, Opt_Dup, Opt_Synth, Targeted_A.I.R. | Datacenter | Datacenter | Datacenter | No | 7, 8 | 12, 15 |
| ||||||||||
DXi8500 Series | 2.9 | Ethernet | No | A.I.R., Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, KMS, Opt_Dup, Opt_Synth | Datacenter | No | No | No | No | No |
DXi8500 Series | 3.0 | Ethernet | No | A.I.R., Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, KMS, Opt_Dup, Opt_Synth | Datacenter | No | No | No | 7 | 12 |
DXi8500 Series | 3.1 | Ethernet | No | A.I.R., Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, KMS, Opt_Dup, Opt_Synth | Datacenter | No | No | No | 7 | 12 |
DXi8500 Series | 10.0 | Ethernet | No | A.I.R., Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, KMS, Opt_Dup, Opt_Synth | Datacenter | Datacenter | No | No | 7 | 12 |
DXi9000 Series [2] | 10.0 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, KMS, Opt_Dup, Opt_Synth | Datacenter | Datacenter | Datacenter | No | 7 | 12, 15 |
| ||||||||||
DXi9000 Series [3][4][5] | 10.1 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, KMS, Opt_Dup, Opt_Synth, Targeted_A.I.R. | Datacenter | Datacenter | Datacenter | No | 7, 8 | 12, 15 |
| ||||||||||
DXi9000 Series [3][4][5][6] | 11.0 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WORM | Datacenter | Datacenter | Datacenter | Datacenter | 7, 8 | No |
| ||||||||||
DXi T10 Series | 10.0 | Ethernet | No | A.I.R., Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth | No | Datacenter | No | No | No | 12 |
DXi T10 Series [3][4][5] | 10.1 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R. | No | Datacenter | Datacenter | No | 8 | 12, 15 |
| ||||||||||
DXi T10 Series [3][4][5][6] | 11.0 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WORM | No | Datacenter | Datacenter | Datacenter | 8 | No |
| ||||||||||
DXi V Series [9] | 2.9 | Ethernet | No | A.I.R., Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth | Datacenter | No | No | No | No | No |
| ||||||||||
DXi V Series [9] | 3.0 | Ethernet | No | A.I.R., Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth | Datacenter | No | No | No | 7 | 12 |
| ||||||||||
DXi V Series [9] | 3.1 | Ethernet | No | A.I.R., Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth | Datacenter | No | No | No | 7 | 12 |
| ||||||||||
DXi V Series [9] | 10.0 | Ethernet | No | A.I.R., Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth | Datacenter | Datacenter | No | No | 7 | 12 |
| ||||||||||
DXi V Series [3][4][5][9] | 10.1 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Direct_Copy_Shared, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R. | Datacenter | Datacenter | Datacenter | No | 7, 8 | 12, 15 |
| ||||||||||
DXi V Series [3][4][5][6][9] | 11.0 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WORM | Datacenter | Datacenter | Datacenter | Datacenter | 7, 8 | No |
|
- Direct Copy to Tape support requires DXi Software 3.0 or later.
- Accelerator support requires DXi Software 3.1 or later.
- Reverse A.I.R. is supported with this solution. For more information on replicating an image back to the source primary server, see Auto Image Replication (AIR): How To move a copy of an image back to the source
- Targeted A.I.R. is supported in One-to-One, Many-to-One, and Cascading A.I.R. configurations.
- Targeted A.I.R. support requires DXi Software 4.1 or later.
- WORM support requires plug-in version 11.0.0-4724 or later, Quantum DXi Software 4.5.2 or later and NetBackup 8.3.0.1 or later.
- The Direct Copy to shared tape drives feature (Direct_Copy_Shared) is supported on the DXi6540 and DXi6550 models.
- Targeted A.I.R. support requires DXi Software 3.4.0.5 or later.
- This device is a virtual appliance. For compatible versions of VMware, see Quantum's and VMware's compatibility lists.
Quantum - Family Membership
Storage Server Family | Members |
---|---|
DXi4000 Series | DXi4510, DXi4520, DXi4601 |
DXi4700 Series | DXi4701 |
DXi4800 Series | DXi4800, DXi4801 |
DXi6000 Series | DXi6510, DXi6520, DXi6530, DXi6540, DXi6550 |
DXi6700 Series | DXi6700, DXi6701, DXi6702 |
DXi6800 Series | DXi6802 |
DXi6900 Series | DXi6900, DXi6900-S |
DXi8500 Series | DXi8500, DXi8500 2TB, DXi8500 3TB |
DXi9000 Series | DXi9000, DXi9100 |
DXi T10 Series | DXi T10-60, DXi T10-120 |
DXi V Series | DXi V5000 |
Quest
Quest - Support with Windows / Linux
Storage Server Family | Plug-in | Data Interface | IPv6 | Supported OpenStorage Functionality | Windows Server 2012 x64 | Windows Server 2016 x64 | Windows Server 2019 x64 | Red Hat Enterprise Linux on x86-64 |
---|---|---|---|---|---|---|---|---|
DR 13g Series | 4.0 | Ethernet | No | Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth | Datacenter | No | No | 7 |
QoreStor [1] | 4.1 | Ethernet | No | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth | Datacenter | Datacenter | Datacenter | 7 [2] |
|
- A.I.R. support requires QoreStor SDS 6.1 storage server software.
- A.I.R. is supported with this media server platform.
Quest - Family Membership
Storage Server Family | Members |
---|---|
DR 13g Series | DR4300, DR4300e, DR6300 |
Secsmart
Secsmart - Support with Windows / Linux
Storage Server Family | Plug-in | Data Interface | IPv6 | Supported OpenStorage Functionality | Windows Server 2016 x64 | Windows Server 2019 x64 | Windows Server 2022 x64 | Red Hat Enterprise Linux on x86-64 | SUSE Linux Enterprise Server on x86-64 |
---|---|---|---|---|---|---|---|---|---|
HyperProtect series [1][2][3][4][5] | 1.6.0 | Ethernet | No | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R., WORM | Datacenter | Datacenter | Datacenter | 7, 8, 9 | 12, 15 |
|
- Accelerator and Synthetic backups requires that File Clone be enabled for DataTurbo.
- Accelerator, Accel_NDMP, Accel_VMware and Opt_Synth are not supported on RHEL 7.9, SLES 12 and SLES 15.
- For OST configuration guide and HyperProtect administration guide, refer to Secsmart documentation at https://pan.baidu.com/s/10IB9g6s2LjNJNom19SLp2A?pwd=fd8i
- Support starts from NetBackup 10.3 onwards and requires Device Mappings Files version 1.178 or later.
- Targeted A.I.R. is supported in One-to-One, One-to-Many, and Many-to-One configurations.
Veritas
Veritas - Support with Windows / Linux
Storage Server Family | Plug-in | Data Interface | IPv6 | Supported OpenStorage Functionality | Windows Server 2012 x64 | Windows Server 2016 x64 | Red Hat Enterprise Linux on x86-64 | SUSE Linux Enterprise Server on x86-64 |
---|---|---|---|---|---|---|---|---|
Veritas Access 3340 Appliance | NetBackup 8.0 and later | Ethernet | No | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R. | Datacenter | Datacenter | 7 | 12 |
Veritas Access 3340/3350 Appliance | NetBackup 10.0 and later | Ethernet | No | A.I.R., Accelerator, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth, Targeted_A.I.R. | Datacenter | Datacenter | 7 | 12 |
Virtual Tape Libraries
Virtual tape device support information is listed below, organized by vendor. Under each vendor there are separate tables showing compatibility with NetBackup Appliances and with Linux/Windows operating systems. The tables provide information on supported versions of software, inquiry string (vendor ID + product ID), and other important notes about the hardware and its compatibility.
Virtual Tape Libraries/Drives - Considerations | Virtual Tape Libraries/Drives - Tape Drive Emulation Attributes | Virtual Tape Libraries/Drives - NetBackup Robot Types | Virtual Tape Libraries/Drives - Vendor Compatibility
Virtual Tape Libraries/Drives - Considerations
Subject | Notes |
---|---|
Support assumptions |
For details on supported operating systems, please refer to the "NetBackup 10.0 - 10.x.x Operating System Software Compatibility List".
1. Virtual tape device software versions are no longer listed in this section. Veritas recommends using the most recent version of software available when you configure the VTL with NetBackup. When a minimum VTL software version is required, it will be listed in a footnote. If a VTL software version is causing a problem, Veritas will work with the hardware vendor to resolve the problem. Veritas and most hardware vendors listed are members of TSAnet. 2. Where support is shown for "Windows Server 2012 Datacenter" it also means that the other editions of Windows Server 2012, Windows Storage Server 2012, Windows Server 2012 R2, and Windows Storage Server 2012 R2 are supported. 3. Where support is shown for "Windows Server 2016 Datacenter" it also means that the other editions of Windows Server 2016 and Windows Storage Server 2016 are supported. 4. Where support is shown for "Windows Server 2019 Datacenter" it also means that the other editions of Windows Server 2019 are supported. 5. Where support is shown for "Windows Server 2022 Datacenter" it also means that the other editions of Windows Server 2022 are supported. 6. Where support is shown for "Red Hat Enterprise Linux 7 on x86-64" it also means that CentOS 7 and Oracle Linux 7 are supported. 7. SUSE Linux Enterprise Server 12 support requires SP3 or later. |
Vendor support considerations |
1. Check the device manufacturer's compatibility list to verify OS platform support for the version of software running on your VTL.
2. Check the device manufacturer's compatibility list to verify the minimum version of VTL software required for your VTL family member. 3. The list of attributes for each drive emulation is based on the most recent version of Virtual tape device software tested. Check with the device manufacturer to determine when support for a specific attribute was added. |
Configuration considerations |
1. The virtual library must be configured with the unique VTL inquiry string as listed.
Using the inquiry string to emulate a real library model is not supported even if the real device is supported with NetBackup.
2. Only the virtual tape drive emulations listed with each virtual library are supported. Other virtual tape drive emulations are not supported even if the real device being emulated is supported with NetBackup. Conversely, a virtual tape drive emulation listed as supported in this section does not mean the physical model is also supported. 3. Veritas recommends the use of SCSI Persistent Reserve (SPR) whenever all the hardware in your device path supports it. Refer to the NetBackup Administrator's Guide for more information on SPR and the types of configurations where SPR may be more effective than the default SPC-2 SCSI reserve and release method. 4. NetBackup NDMP Direct Copy with VTL enables NDMP tape duplication to physical tape libraries. For more information on this feature, see "About NDMP DirectCopy". |
OS library and tape driver considerations | 1. Refer to the Tape Drives section of this document for information on supported tape drivers. |
Operational considerations |
1. Filling up the available disk space on a virtual device may cause unpredictable behavior of the device.
Working with the device vendor may be required to recover from errors that result from a full disk.
2. NetBackup NDMP Direct Copy with VTL Copying virtual media to physical media or a 2nd virtual media is not supported by Veritas; any support for this must come from the VTL vendor providing the capability. If the VTL copies virtual media to physical media (or a 2nd VTL), NetBackup is not aware of the physical media or 2nd virtual media and may not be able to recover that data directly from it. 3. When NetBackup expires a virtual volume, the virtual device is not aware that the data is no longer needed. Because of this, the virtual device may appear to be much closer to capacity than it really is. When NetBackup subsequently begins writing to that virtual volume at the beginning of the volume, the virtual library will then be aware that the rest of the data is no longer needed and can free up the disk space. |
Virtual Tape Libraries/Drives - Tape Drive Emulation Attributes
The following table lists attributes supported with Virtual Tape Libraries and indicates the NetBackup version (9.0 or later) at which that attribute was first supported.
Attribute | Abbreviation | NetBackup 10.0 (or later) Start of Support |
---|---|---|
NDMP Direct Copy with VTL, physical tape drives used with this feature must be dedicated to the VTL. | DirCpy_Ded | 10.0 |
NDMP Direct Copy with VTL, physical tape drives used with this feature can be shared using NetBackup Shared Storage Option (SSO). | DirCpy_Shr | 10.0 |
SCSI Reservation | SResv | 10.0 |
SCSI Persistent Reservation | SPR | 10.0 |
Write Once, Read Many | WORM | 10.0 |
NetBackup Encryption Key Management Service | KMS | 10.0 |
Append-only mode | Append | 10.0 |
Virtual Tape Libraries/Drives - NetBackup Robot Types
Most Virtual Tape Libraries use the NetBackup robot type TLD. The following table lists operating system platform support for TLD robots. For supported OS versions, refer to the "NetBackup 10.0 - 10.x.x Operating System Software Compatibility List".
A few Virtual Tape Libraries use NetBackup robot type ACS. For information on ACS robotics support, see ACS - Oracle Automated Cartridge System in the Tape Libraries section.
For more information about configuring robot types, see the "NetBackup Device Configuration Guide".
TLD - Tape Library DLT
Operating System | NetBackup 10.0 (or later) Start of Support |
---|---|
NDMP | 10.0 |
Red Hat Enterprise Linux on x86-64 | 10.0 |
SUSE Linux Enterprise Server on x86-64 | 10.0 |
Windows Server 2012 x64 | 10.0 |
Windows Server 2016 x64 | 10.0 |
Windows Server 2019 x64 | 10.0 |
Windows Server 2022 x64 | 10.0 |
Virtual Tape Libraries/Drives - Vendor Compatibility
Amazon | Dell EMC | Dell EMC Data Domain | FalconStor | Fujitsu | H3C | Hewlett Packard Enterprise | Hitachi Vantara | Huawei | IBM | Infinidat | NEC | Oracle | Quantum | Quest | Spectra Logic | Tandberg
Amazon
Amazon - Support with Windows / Linux
VTL Family - Interface | Virtual Tape Drive | Software Version | Inquiry String | Attributes | Windows Server 2012 x64 | Windows Server 2016 x64 | Windows Server 2019 x64 | Red Hat Enterprise Linux on x86-64 |
---|---|---|---|---|---|---|---|---|
AWS Storage Gateway VTL - iSCSI [1][2][3] | IBM LTO - all generations | Latest from Manufacturer | AWS^^^^^Gateway-VTL | Datacenter | Datacenter | Datacenter | 7 | |
|
- Please refer to AWS documentation for hypervisor and host requirements.
- The AWS Storage Gateway VTL is also supported when deployed as an Amazon EC2 instance.
- This solution uses S3 and Glacier storage. Before deployment, please refer to Best Practices for using Veritas Backup products (NetBackup, Backup Exec) with the Amazon Web Services (AWS) Storage Gateway-VTL.
Dell EMC
Dell EMC - Support with NetBackup Appliance
VTL Family - Interface | Virtual Tape Drive | Software Version | Inquiry String | Attributes | 5200 Series | 5300 Series |
---|---|---|---|---|---|---|
DL3D series - Fibre Channel | IBM LTO - all generations | Latest from Manufacturer | EMC^^^^^DL1500 | Yes | Yes | |
DL5000 Series - Fibre Channel | Hewlett Packard Enterprise LTO - all generations | Latest from Manufacturer | EMC^^^^^Disk^Library | DirCpy_Shr | Yes | Yes |
DL5000 Series - Fibre Channel | IBM LTO - all generations | Latest from Manufacturer | EMC^^^^^Disk^Library | DirCpy_Shr | Yes | Yes |
Dell EMC - Support with Windows / Linux
VTL Family - Interface | Virtual Tape Drive | Software Version | Inquiry String | Attributes | Windows Server 2012 x64 | Windows Server 2016 x64 | Windows Server 2019 x64 | Red Hat Enterprise Linux on x86-64 | SUSE Linux Enterprise Server on x86-64 |
---|---|---|---|---|---|---|---|---|---|
DL3D series - Fibre Channel | IBM LTO - all generations | Latest from Manufacturer | EMC^^^^^DL1500 | Datacenter | Datacenter | Datacenter | 7 | 12, 15 | |
DL5000 Series - Fibre Channel | Hewlett Packard Enterprise LTO - all generations | Latest from Manufacturer | EMC^^^^^Disk^Library | DirCpy_Shr | Datacenter | Datacenter | Datacenter | 7 | 12, 15 |
DL5000 Series - Fibre Channel | IBM LTO - all generations | Latest from Manufacturer | EMC^^^^^Disk^Library | DirCpy_Shr | Datacenter | Datacenter | Datacenter | 7 | 12, 15 |
DR Series (Dell) - iSCSI | IBM LTO - all generations | Latest from Manufacturer | DELL^^^^DR_L700 | Datacenter | No | No | No | No | |
Dell EMC - Family Membership
VTL Family - Interface | Members |
---|---|
DL3D series - Fibre Channel | DL1500, DL3000 |
Dell EMC Data Domain
Dell EMC Data Domain - Support with NetBackup Appliance
VTL Family - Interface | Virtual Tape Drive | Software Version | Inquiry String | Attributes | 5200 Series | 5300 Series |
---|---|---|---|---|---|---|
Appliance Series - Fibre Channel [1][2] | Hewlett Packard Enterprise LTO - all generations | Latest from Manufacturer | D_DOMAINRESTORER_L180 | Yes | Yes | |
| ||||||
Appliance Series - Fibre Channel [1][2] | IBM LTO - all generations | Latest from Manufacturer | D_DOMAINRESTORER_L180 | Yes | Yes | |
|
- The ADIC inquiry string is supported with VTL software version 5.3 and later.
- The Quantum inquiry string is supported with VTL software version 5.5 and later.
Dell EMC Data Domain - Support with Windows / Linux
VTL Family - Interface | Virtual Tape Drive | Software Version | Inquiry String | Attributes | Windows Server 2012 x64 | Windows Server 2016 x64 | Windows Server 2019 x64 | Red Hat Enterprise Linux on x86-64 | SUSE Linux Enterprise Server on x86-64 |
---|---|---|---|---|---|---|---|---|---|
Appliance Series - Fibre Channel [1][2] | Hewlett Packard Enterprise LTO - all generations | Latest from Manufacturer | D_DOMAINRESTORER_L180 | Datacenter | Datacenter | Datacenter | 7 | 12, 15 | |
| |||||||||
Appliance Series - Fibre Channel [1][2] | IBM LTO - all generations | Latest from Manufacturer | D_DOMAINRESTORER_L180 | Datacenter | Datacenter | Datacenter | 7, 8 | 12, 15 | |
| |||||||||
Appliance Series - NDMP | IBM LTO - all generations | Latest from Manufacturer | D_DOMAINRESTORER_L180 | No | No | No | No | 12 | |
- The ADIC inquiry string is supported with VTL software version 5.3 and later.
- The Quantum inquiry string is supported with VTL software version 5.5 and later.
Dell EMC Data Domain - Family Membership
VTL Family - Interface | Members |
---|---|
Appliance Series - Fibre Channel | DD2200, DD2500, DD3300, DD4200, DD4500, DD6300, DD6800, DD6900, DD7200, DD9300, DD9400, DD9500, DD9800, DD9900 |
Appliance Series - NDMP | DD2200, DD2500, DD3300, DD4200, DD4500, DD6300, DD6800, DD6900, DD7200, DD9300, DD9400, DD9500, DD9800, DD9900 |
FalconStor
FalconStor - Support with NetBackup Appliance
VTL Family - Interface | Virtual Tape Drive | Software Version | Inquiry String | Attributes | 5200 Series | 5300 Series |
---|---|---|---|---|---|---|
VirtualTape Library - Fibre Channel | Hewlett Packard Enterprise LTO - all generations | Latest from Manufacturer | FALCON^^VTL | Yes | Yes | |
VirtualTape Library - Fibre Channel | IBM LTO - all generations | Latest from Manufacturer | FALCON^^VTL | Yes | Yes | |
VirtualTape Library - Fibre Channel | Oracle StorageTek T9840 - all generations | Latest from Manufacturer | FALCON^^VTL | Yes | Yes | |
VirtualTape Library - Fibre Channel | Oracle StorageTek T10000 - all generations | Latest from Manufacturer | FALCON^^VTL | Yes | Yes | |
FalconStor - Support with Windows / Linux
VTL Family - Interface | Virtual Tape Drive | Software Version | Inquiry String | Attributes | Windows Server 2012 x64 | Windows Server 2016 x64 | Windows Server 2019 x64 | Red Hat Enterprise Linux on x86-64 | SUSE Linux Enterprise Server on x86-64 |
---|---|---|---|---|---|---|---|---|---|
VirtualTape Library (RedHat VTL Server Platform) - Fibre Channel | Hewlett Packard Enterprise LTO - all generations | Latest from Manufacturer | FALCON^^VTL | DirCpy_Shr | Datacenter | Datacenter | Datacenter | 7 | 12, 15 |
VirtualTape Library (RedHat VTL Server Platform) - Fibre Channel | IBM LTO - all generations | Latest from Manufacturer | FALCON^^VTL | DirCpy_Shr | Datacenter | Datacenter | Datacenter | 7 | 12, 15 |
Fujitsu
Fujitsu - Support with NetBackup Appliance
VTL Family - Interface | Virtual Tape Drive | Software Version | Inquiry String | Attributes | 5200 Series | 5300 Series |
---|---|---|---|---|---|---|
ETERNUS CS (ACS) - Fibre Channel [1] | IBM LTO - all generations | Latest from Manufacturer | FSC^^^^^CS-TL | Yes | Yes | |
| ||||||
ETERNUS CS (ACS) - Fibre Channel [1] | IBM TotalStorage 3590 - all generations | Latest from Manufacturer | FSC^^^^^CS-TL | Yes | Yes | |
| ||||||
ETERNUS CS (ACS) - Fibre Channel [1] | Oracle StorageTek T9840 - all generations | Latest from Manufacturer | FSC^^^^^CS-TL | Yes | Yes | |
| ||||||
ETERNUS CS - Fibre Channel | IBM LTO - all generations | Latest from Manufacturer | FSC^^^^^CS-TL | Yes | Yes | |
ETERNUS CS - Fibre Channel | IBM TotalStorage 3590 - all generations | Latest from Manufacturer | FSC^^^^^CS-TL | Yes | Yes | |
ETERNUS CS - Fibre Channel | Oracle StorageTek T9840 - all generations | Latest from Manufacturer | FSC^^^^^CS-TL | Yes | Yes | |
ETERNUS CS800 S4 - Fibre Channel | Hewlett Packard Enterprise LTO - all generations | Latest from Manufacturer | FSC^^^^^CS-TL | DirCpy_Shr | Yes | Yes |
ETERNUS CS800 S4 - Fibre Channel | IBM LTO - all generations | Latest from Manufacturer | FSC^^^^^CS-TL | DirCpy_Shr | Yes | Yes |
ETERNUS CS800 S5 - Fibre Channel | Hewlett Packard Enterprise LTO - all generations | Latest from Manufacturer | FSC^^^^^CS-TL | DirCpy_Shr | Yes | Yes |
ETERNUS CS800 S5 - Fibre Channel | IBM LTO - all generations | Latest from Manufacturer | FSC^^^^^CS-TL | DirCpy_Shr | Yes | Yes |
ETERNUS CS800 S6 - Fibre Channel | Hewlett Packard Enterprise LTO - all generations | Latest from Manufacturer | FSC^^^^^CS-TL | DirCpy_Shr | Yes | Yes |
ETERNUS CS800 S6 - Fibre Channel | IBM LTO - all generations | Latest from Manufacturer | FSC^^^^^CS-TL | DirCpy_Shr | Yes | Yes |
ETERNUS CS800 S7 - Fibre Channel | Hewlett Packard Enterprise LTO - all generations | Latest from Manufacturer | FSC^^^^^CS-TL | DirCpy_Shr | Yes | Yes |
ETERNUS CS800 S7 - Fibre Channel | IBM LTO - all generations | Latest from Manufacturer | FSC^^^^^CS-TL | DirCpy_Shr | Yes | Yes |
Fujitsu - Support with Windows / Linux
VTL Family - Interface | Virtual Tape Drive | Software Version | Inquiry String | Attributes | Windows Server 2012 x64 | Windows Server 2016 x64 | Windows Server 2019 x64 | Red Hat Enterprise Linux on x86-64 | SUSE Linux Enterprise Server on x86-64 |
---|---|---|---|---|---|---|---|---|---|
ETERNUS CS (ACS) - Fibre Channel [1] | IBM LTO - all generations | Latest from Manufacturer | FSC^^^^^CS-TL | Datacenter | Datacenter | No | 7 | 12 | |
| |||||||||
ETERNUS CS (ACS) - Fibre Channel [1] | IBM TotalStorage 3590 - all generations | Latest from Manufacturer | FSC^^^^^CS-TL | No | No | No | 7 | 12 | |
| |||||||||
ETERNUS CS (ACS) - Fibre Channel [1] | Oracle StorageTek T9840 - all generations | Latest from Manufacturer | FSC^^^^^CS-TL | No | No | No | 7 | 12 | |
| |||||||||
ETERNUS CS - Fibre Channel | IBM LTO - all generations | Latest from Manufacturer | FSC^^^^^CS-TL | Datacenter | Datacenter | Datacenter | 7 | 12, 15 | |
ETERNUS CS - Fibre Channel | IBM TotalStorage 3590 - all generations | Latest from Manufacturer | FSC^^^^^CS-TL | No | No | No | 7 | 12 | |
ETERNUS CS - Fibre Channel | Oracle StorageTek T9840 - all generations | Latest from Manufacturer | FSC^^^^^CS-TL | No | No | No | 7 | 12 | |
ETERNUS CS800 S4 - Fibre Channel | Hewlett Packard Enterprise LTO - all generations | Latest from Manufacturer | FSC^^^^^CS-TL | DirCpy_Shr | Datacenter | Datacenter | Datacenter | 7 | 12, 15 |
ETERNUS CS800 S4 - Fibre Channel | IBM LTO - all generations | Latest from Manufacturer | FSC^^^^^CS-TL | DirCpy_Shr | Datacenter | Datacenter | Datacenter | 7 | 12, 15 |
ETERNUS CS800 S5 - Fibre Channel | Hewlett Packard Enterprise LTO - all generations | Latest from Manufacturer | FSC^^^^^CS-TL | DirCpy_Shr | Datacenter | Datacenter | Datacenter | 7 | 12, 15 |
ETERNUS CS800 S5 - Fibre Channel | IBM LTO - all generations | Latest from Manufacturer | FSC^^^^^CS-TL | DirCpy_Shr | Datacenter | Datacenter | Datacenter | 7 | 12, 15 |
ETERNUS CS800 S6 - Fibre Channel | Hewlett Packard Enterprise LTO - all generations | Latest from Manufacturer | FSC^^^^^CS-TL | DirCpy_Shr | Datacenter | Datacenter | Datacenter | 7 | 12, 15 |
ETERNUS CS800 S6 - Fibre Channel | IBM LTO - all generations | Latest from Manufacturer | FSC^^^^^CS-TL | DirCpy_Shr | Datacenter | Datacenter | Datacenter | 7 | 12, 15 |
ETERNUS CS800 S7 - Fibre Channel | Hewlett Packard Enterprise LTO - all generations | Latest from Manufacturer | FSC^^^^^CS-TL | DirCpy_Shr | Datacenter | Datacenter | No | 7 | 12 |
ETERNUS CS800 S7 - Fibre Channel | IBM LTO - all generations | Latest from Manufacturer | FSC^^^^^CS-TL | DirCpy_Shr | Datacenter | Datacenter | No | 7 | 12 |
Fujitsu - Family Membership
VTL Family - Interface | Members |
---|---|
ETERNUS CS (ACS) - Fibre Channel | ETERNUS CS50 (ACS), ETERNUS CS500 (ACS), ETERNUS CS1000 (ACS), ETERNUS CS1500 (ACS), ETERNUS CS2000 (ACS), ETERNUS CS3000 (ACS), ETERNUS CS4000 (ACS), ETERNUS CS5000 (ACS), ETERNUS CS8000 (ACS) |
ETERNUS CS - Fibre Channel | ETERNUS CS50, ETERNUS CS500, ETERNUS CS1000, ETERNUS CS1500, ETERNUS CS2000, ETERNUS CS3000, ETERNUS CS4000, ETERNUS CS5000, ETERNUS CS8000 |
H3C
H3C - Support with NetBackup Appliance
VTL Family - Interface | Virtual Tape Drive | Software Version | Inquiry String | Attributes | 5200 Series | 5300 Series |
---|---|---|---|---|---|---|
CP3352 - Fibre Channel | Hewlett Packard Enterprise LTO - all generations | Latest from Manufacturer | HP^^^^^^D2DBS | Yes | Yes | |
CP3354 - Fibre Channel | Hewlett Packard Enterprise LTO - all generations | Latest from Manufacturer | HP^^^^^^D2DBS | Yes | Yes | |
CP5510 - Fibre Channel | Hewlett Packard Enterprise LTO - all generations | Latest from Manufacturer | HP^^^^^^D2DBS | Yes | Yes | |
CP5550 - Fibre Channel | Hewlett Packard Enterprise LTO - all generations | Latest from Manufacturer | HP^^^^^^D2DBS | Yes | Yes | |
CP6660 - Fibre Channel | Hewlett Packard Enterprise LTO - all generations | Latest from Manufacturer | HP^^^^^^D2DBS | Yes | Yes | |
H3C - Support with Windows / Linux
VTL Family - Interface | Virtual Tape Drive | Software Version | Inquiry String | Attributes | Windows Server 2012 x64 | Windows Server 2016 x64 | Windows Server 2019 x64 | Red Hat Enterprise Linux on x86-64 | SUSE Linux Enterprise Server on x86-64 |
---|---|---|---|---|---|---|---|---|---|
CP3352 - Fibre Channel | Hewlett Packard Enterprise LTO - all generations | Latest from Manufacturer | HP^^^^^^D2DBS | Datacenter | Datacenter | Datacenter | 7 | 12, 15 | |
CP3354 - Fibre Channel | Hewlett Packard Enterprise LTO - all generations | Latest from Manufacturer | HP^^^^^^D2DBS | Datacenter | Datacenter | Datacenter | 7 | 12, 15 | |
CP5510 - Fibre Channel | Hewlett Packard Enterprise LTO - all generations | Latest from Manufacturer | HP^^^^^^D2DBS | Datacenter | Datacenter | Datacenter | 7 | 12, 15 | |
CP5550 - Fibre Channel | Hewlett Packard Enterprise LTO - all generations | Latest from Manufacturer | HP^^^^^^D2DBS | Datacenter | No | No | 7 | 12 | |
CP6660 - Fibre Channel | Hewlett Packard Enterprise LTO - all generations | Latest from Manufacturer | HP^^^^^^D2DBS | Datacenter | No | No | 7 | 12 | |
Hewlett Packard Enterprise
Hewlett Packard Enterprise - Support with NetBackup Appliance
VTL Family - Interface | Virtual Tape Drive | Software Version | Inquiry String | Attributes | 5200 Series | 5300 Series |
---|---|---|---|---|---|---|
StoreOnce 3500 / 3600 Series - Fibre Channel | Hewlett Packard Enterprise LTO - all generations | Latest from Manufacturer | HP^^^^^^D2DBS | Yes | Yes | |
StoreOnce 4000 - Fibre Channel [1] | Hewlett Packard Enterprise LTO - all generations | Latest from Manufacturer | HP^^^^^^D2DBS | Yes | Yes | |
| ||||||
StoreOnce 5000 - Fibre Channel | Hewlett Packard Enterprise LTO - all generations | Latest from Manufacturer | HP^^^^^^D2DBS | Yes | Yes | |
StoreOnce 6000 - Fibre Channel [1] | Hewlett Packard Enterprise LTO - all generations | Latest from Manufacturer | HP^^^^^^D2DBS | Yes | Yes | |
|
Hewlett Packard Enterprise - Support with Windows / Linux
VTL Family - Interface | Virtual Tape Drive | Software Version | Inquiry String | Attributes | Windows Server 2012 x64 | Windows Server 2016 x64 | Windows Server 2019 x64 | Red Hat Enterprise Linux on x86-64 | SUSE Linux Enterprise Server on x86-64 |
---|---|---|---|---|---|---|---|---|---|
StoreOnce 3500 / 3600 Series - Fibre Channel | Hewlett Packard Enterprise LTO - all generations | Latest from Manufacturer | HP^^^^^^D2DBS | Datacenter | Datacenter | Datacenter | 7 | 12, 15 | |
StoreOnce 4000 - Fibre Channel [1] | Hewlett Packard Enterprise LTO - all generations | Latest from Manufacturer | HP^^^^^^D2DBS | Datacenter | Datacenter | Datacenter | 7 | 12, 15 | |
| |||||||||
StoreOnce 5000 - Fibre Channel | Hewlett Packard Enterprise LTO - all generations | Latest from Manufacturer | HP^^^^^^D2DBS | Datacenter | Datacenter | Datacenter | 7 | 12, 15 | |
StoreOnce 6000 - Fibre Channel [1] | Hewlett Packard Enterprise LTO - all generations | Latest from Manufacturer | HP^^^^^^D2DBS | Datacenter | Datacenter | Datacenter | 7 | 12, 15 | |
|
Hewlett Packard Enterprise - Family Membership
VTL Family - Interface | Members |
---|---|
StoreOnce 3500 / 3600 Series - Fibre Channel | StoreOnce 3520, StoreOnce 3540, StoreOnce 3620, StoreOnce 3640 |
StoreOnce 4000 - Fibre Channel | StoreOnce 4210fc, StoreOnce 4220, StoreOnce 4420, StoreOnce 4430, StoreOnce 4500, StoreOnce 4700, StoreOnce 4900 |
StoreOnce 5000 - Fibre Channel | StoreOnce 5100, StoreOnce 5200, StoreOnce 5250, StoreOnce 5500, StoreOnce 5600 |
StoreOnce 6000 - Fibre Channel | StoreOnce 6500, StoreOnce 6600, StoreOnce B6200 |
Hitachi Vantara
Hitachi Vantara - Support with NetBackup Appliance
VTL Family - Interface | Virtual Tape Drive | Software Version | Inquiry String | Attributes | 5200 Series | 5300 Series |
---|---|---|---|---|---|---|
Hitachi Virtual Tape Library Solutions - Fibre Channel | IBM LTO - all generations | Latest from Manufacturer | IBM^^^^^V3584L32 | Yes | Yes | |
Hitachi Vantara - Support with Windows / Linux
VTL Family - Interface | Virtual Tape Drive | Software Version | Inquiry String | Attributes | Red Hat Enterprise Linux on x86-64 | SUSE Linux Enterprise Server on x86-64 |
---|---|---|---|---|---|---|
Hitachi Virtual Tape Library Solutions - Fibre Channel | IBM LTO - all generations | Latest from Manufacturer | IBM^^^^^V3584L32 | 7 | 12 | |
Hitachi Vantara - Family Membership
VTL Family - Interface | Members |
---|---|
Hitachi Virtual Tape Library Solutions - Fibre Channel | ProtecTIER |
Huawei
Huawei - Support with NetBackup Appliance
VTL Family - Interface | Virtual Tape Drive | Software Version | Inquiry String | Attributes | 5200 Series | 5300 Series |
---|---|---|---|---|---|---|
VTL - Fibre Channel | IBM LTO - all generations | Latest from Manufacturer | FALCON^^VTL | Yes | Yes | |
Huawei - Support with Windows / Linux
VTL Family - Interface | Virtual Tape Drive | Software Version | Inquiry String | Attributes | Windows Server 2012 x64 | Windows Server 2016 x64 | Windows Server 2019 x64 | Red Hat Enterprise Linux on x86-64 | SUSE Linux Enterprise Server on x86-64 |
---|---|---|---|---|---|---|---|---|---|
VTL - Fibre Channel | IBM LTO - all generations | Latest from Manufacturer | FALCON^^VTL | DirCpy_Shr | Datacenter | Datacenter | Datacenter | 7 | 12, 15 |
Huawei - Family Membership
VTL Family - Interface | Members |
---|---|
VTL - Fibre Channel | VTL3500, VTL6000 |
IBM
IBM - Support with NetBackup Appliance
VTL Family - Interface | Virtual Tape Drive | Software Version | Inquiry String | Attributes | 5200 Series | 5300 Series |
---|---|---|---|---|---|---|
System Storage TS7600 series with ProtecTIER - Fibre Channel | IBM LTO - all generations | Latest from Manufacturer | IBM^^^^^V3584L32 | Yes | Yes | |
System Storage TS7650G ProtecTIER (DTC) - Fibre Channel | IBM LTO - all generations | Latest from Manufacturer | DTC^^^^^VTF | Yes | Yes | |
System Storage TS7650G ProtecTIER (TS3500) - Fibre Channel | IBM LTO - all generations | Latest from Manufacturer | IBM^^^^^3584L32 | Yes | Yes | |
Virtualization Engine TS7510 - Fibre Channel | IBM LTO - all generations | Latest from Manufacturer | IBM^^^^^TS7510 | Yes | Yes | |
Virtualization Engine TS7510 - Fibre Channel | IBM TotalStorage 3592 Model J1A | Latest from Manufacturer | IBM^^^^^TS7510 | Yes | Yes | |
Virtualization Engine TS7520 - Fibre Channel [1][2] | IBM LTO - all generations | Latest from Manufacturer | IBM^^^^^TS7520 | DirCpy_Ded | Yes | Yes |
| ||||||
Virtualization Engine TS7520 - Fibre Channel [1][2] | IBM System Storage TS1120 (3592 Model E05) | Latest from Manufacturer | IBM^^^^^TS7520 | DirCpy_Ded | Yes | Yes |
| ||||||
Virtualization Engine TS7520 - Fibre Channel [1][2] | IBM TotalStorage 3592 Model J1A | Latest from Manufacturer | IBM^^^^^TS7520 | DirCpy_Ded | Yes | Yes |
| ||||||
Virtualization Engine TS7530 - Fibre Channel | IBM LTO - all generations | Latest from Manufacturer | IBM^^^^^TS7530 | DirCpy_Ded | Yes | Yes |
Virtualization Engine TS7530 - Fibre Channel | IBM System Storage TS1120 (3592 Model E05) | Latest from Manufacturer | IBM^^^^^TS7530 | DirCpy_Ded | Yes | Yes |
Virtualization Engine TS7530 - Fibre Channel | IBM TotalStorage 3592 Model J1A | Latest from Manufacturer | IBM^^^^^TS7530 | DirCpy_Ded | Yes | Yes |
- NDMP Direct Copy with VTL support requires patch update ve138205g for 2.0 systems and update ve13821201 for 2.2 systems.
- The failover feature of the TS7520 has been tested and found to be compatible with NetBackup. Support for the TS7520 failover feature is provided by IBM.
IBM - Support with Windows / Linux
VTL Family - Interface | Virtual Tape Drive | Software Version | Inquiry String | Attributes | Windows Server 2012 x64 | Windows Server 2016 x64 | Windows Server 2019 x64 | Red Hat Enterprise Linux on x86-64 | SUSE Linux Enterprise Server on x86-64 |
---|---|---|---|---|---|---|---|---|---|
System Storage TS7600 series with ProtecTIER - Fibre Channel | IBM LTO - all generations | Latest from Manufacturer | IBM^^^^^V3584L32 | Datacenter | Datacenter | Datacenter | 7 | 12, 15 | |
System Storage TS7650G ProtecTIER (DTC) - Fibre Channel | IBM LTO - all generations | Latest from Manufacturer | DTC^^^^^VTF | Datacenter | Datacenter | Datacenter | 7 | 12, 15 | |
System Storage TS7650G ProtecTIER (TS3500) - Fibre Channel | IBM LTO - all generations | Latest from Manufacturer | IBM^^^^^3584L32 | Datacenter | Datacenter | Datacenter | 7 | 12, 15 | |
Virtualization Engine TS7530 - Fibre Channel | IBM LTO - all generations | Latest from Manufacturer | IBM^^^^^TS7530 | DirCpy_Ded | Datacenter | Datacenter | Datacenter | 7 | 12, 15 |
Virtualization Engine TS7530 - Fibre Channel | IBM System Storage TS1120 (3592 Model E05) | Latest from Manufacturer | IBM^^^^^TS7530 | DirCpy_Ded | No | No | No | 7 | 12 |
Virtualization Engine TS7530 - Fibre Channel | IBM TotalStorage 3592 Model J1A | Latest from Manufacturer | IBM^^^^^TS7530 | DirCpy_Ded | No | No | No | 7 | 12 |
IBM - Family Membership
VTL Family - Interface | Members |
---|---|
System Storage TS7600 series with ProtecTIER - Fibre Channel | System Storage TS7610SM1 ProtecTIER (V-TS3500), System Storage TS7620SM2 ProtecTIER (V-TS3500), System Storage TS7650AP1 ProtecTIER (V-TS3500), System Storage TS7650G ProtecTIER (V-TS3500) |
Infinidat
Infinidat - Support with Windows / Linux
VTL Family - Interface | Virtual Tape Drive | Software Version | Inquiry String | Attributes | Windows Server 2012 x64 | Windows Server 2016 x64 | Windows Server 2019 x64 | Red Hat Enterprise Linux on x86-64 | SUSE Linux Enterprise Server on x86-64 |
---|---|---|---|---|---|---|---|---|---|
InfiniGuard B-series - Fibre Channel | Hewlett Packard Enterprise LTO - all generations | Latest from Manufacturer | QUANTUM^DXi | DirCpy_Shr | Datacenter | Datacenter | Datacenter | 7 | 12, 15 |
InfiniGuard B-series - Fibre Channel | IBM LTO - all generations | Latest from Manufacturer | QUANTUM^DXi | DirCpy_Shr | Datacenter | Datacenter | Datacenter | 7 | 12, 15 |
Infinidat - Family Membership
VTL Family - Interface | Members |
---|---|
InfiniGuard B-series - Fibre Channel | InfiniGuard B4212N, InfiniGuard B4260, InfiniGuard B4260N |
NEC
NEC - Support with NetBackup Appliance
VTL Family - Interface | Virtual Tape Drive | Software Version | Inquiry String | Attributes | 5200 Series | 5300 Series |
---|---|---|---|---|---|---|
T3000VT Series - Fibre Channel | IBM LTO - all generations | Latest from Manufacturer | IBM^^^^^V3584L32 | Yes | Yes | |
NEC - Support with Windows / Linux
VTL Family - Interface | Virtual Tape Drive | Software Version | Inquiry String | Attributes | Red Hat Enterprise Linux on x86-64 | SUSE Linux Enterprise Server on x86-64 |
---|---|---|---|---|---|---|
T3000VT Series - Fibre Channel | IBM LTO - all generations | Latest from Manufacturer | IBM^^^^^V3584L32 | 7 | 12 | |
NEC - Family Membership
VTL Family - Interface | Members |
---|---|
T3000VT Series - Fibre Channel | T3200VT (V-TS3500) |
Oracle
Oracle - Support with Windows / Linux
VTL Family - Interface | Virtual Tape Drive | Software Version | Inquiry String | Attributes | Windows Server 2012 x64 | Red Hat Enterprise Linux on x86-64 |
---|---|---|---|---|---|---|
StorageTek VSM 7 - Ethernet [1] | Oracle VDrive | Latest from Manufacturer | Datacenter | 7 | ||
|
Quantum
Quantum - Support with NetBackup Appliance
VTL Family - Interface | Virtual Tape Drive | Software Version | Inquiry String | Attributes | 5200 Series | 5300 Series |
---|---|---|---|---|---|---|
DXi4700 Series - Fibre Channel | Hewlett Packard Enterprise LTO - all generations | Latest from Manufacturer | QUANTUM^DXi | DirCpy_Shr | Yes | Yes |
DXi4700 Series - Fibre Channel | IBM LTO - all generations | Latest from Manufacturer | QUANTUM^DXi | DirCpy_Shr | Yes | Yes |
DXi6800 Series - Fibre Channel | Hewlett Packard Enterprise LTO - all generations | Latest from Manufacturer | QUANTUM^DXi | DirCpy_Shr | Yes | Yes |
DXi6800 Series - Fibre Channel | IBM LTO - all generations | Latest from Manufacturer | QUANTUM^DXi | DirCpy_Shr | Yes | Yes |
DXi6900 Series - Fibre Channel | Hewlett Packard Enterprise LTO - all generations | Latest from Manufacturer | QUANTUM^DXi | DirCpy_Shr | Yes | Yes |
DXi6900 Series - Fibre Channel | IBM LTO - all generations | Latest from Manufacturer | QUANTUM^DXi | DirCpy_Shr | Yes | Yes |
DXi7500 Series - Fibre Channel | Hewlett Packard Enterprise LTO - all generations | Latest from Manufacturer | QUANTUM^DXi | DirCpy_Shr | Yes | Yes |
DXi7500 Series - Fibre Channel | IBM LTO - all generations | Latest from Manufacturer | QUANTUM^DXi | DirCpy_Shr | Yes | Yes |
Quantum - Support with Windows / Linux
VTL Family - Interface | Virtual Tape Drive | Software Version | Inquiry String | Attributes | Windows Server 2012 x64 | Windows Server 2016 x64 | Windows Server 2019 x64 | Red Hat Enterprise Linux on x86-64 | SUSE Linux Enterprise Server on x86-64 |
---|---|---|---|---|---|---|---|---|---|
DXi4700 Series - Fibre Channel | Hewlett Packard Enterprise LTO - all generations | Latest from Manufacturer | QUANTUM^DXi | DirCpy_Shr | Datacenter | Datacenter | Datacenter | 7 | 12, 15 |
DXi4700 Series - Fibre Channel | IBM LTO - all generations | Latest from Manufacturer | QUANTUM^DXi | DirCpy_Shr | Datacenter | Datacenter | Datacenter | 7 | 12, 15 |
DXi4800 Series - Fibre Channel | Hewlett Packard Enterprise LTO - all generations | Latest from Manufacturer | QUANTUM^DXi | DirCpy_Shr | Datacenter | Datacenter | Datacenter | 7 | 12, 15 |
DXi4800 Series - Fibre Channel | IBM LTO - all generations | Latest from Manufacturer | QUANTUM^DXi | DirCpy_Shr | Datacenter | Datacenter | Datacenter | 7 | 12, 15 |
DXi6800 Series - Fibre Channel | Hewlett Packard Enterprise LTO - all generations | Latest from Manufacturer | QUANTUM^DXi | DirCpy_Shr | Datacenter | Datacenter | Datacenter | 7 | 12, 15 |
DXi6800 Series - Fibre Channel | IBM LTO - all generations | Latest from Manufacturer | QUANTUM^DXi | DirCpy_Shr | Datacenter | Datacenter | Datacenter | 7 | 12, 15 |
DXi6900 Series - Fibre Channel | Hewlett Packard Enterprise LTO - all generations | Latest from Manufacturer | QUANTUM^DXi | DirCpy_Shr | Datacenter | Datacenter | Datacenter | 7 | 12, 15 |
DXi6900 Series - Fibre Channel | IBM LTO - all generations | Latest from Manufacturer | QUANTUM^DXi | DirCpy_Shr | Datacenter | Datacenter | Datacenter | 7 | 12, 15 |
DXi7500 Series - Fibre Channel | Hewlett Packard Enterprise LTO - all generations | Latest from Manufacturer | QUANTUM^DXi | DirCpy_Shr | Datacenter | Datacenter | Datacenter | 7 | 12, 15 |
DXi7500 Series - Fibre Channel | IBM LTO - all generations | Latest from Manufacturer | QUANTUM^DXi | DirCpy_Shr | Datacenter | Datacenter | Datacenter | 7 | 12, 15 |
DXi9000 Series - Fibre Channel | Hewlett Packard Enterprise LTO - all generations | Latest from Manufacturer | QUANTUM^DXi | DirCpy_Shr | Datacenter | Datacenter | Datacenter | 7 | 12, 15 |
DXi9000 Series - Fibre Channel | IBM LTO - all generations | Latest from Manufacturer | QUANTUM^DXi | DirCpy_Shr | Datacenter | Datacenter | Datacenter | 7 | 12, 15 |
Quantum - Family Membership
VTL Family - Interface | Members |
---|---|
DXi4700 Series - Fibre Channel | DXi4701 |
DXi4800 Series - Fibre Channel | DXi4800 |
DXi6800 Series - Fibre Channel | DXi6802 |
DXi6900 Series - Fibre Channel | DXi6900, DXi6900-S |
DXi7500 Series - Fibre Channel | DXi7500, DXi7500 Enterprise, DXi7500 Express, DXi7500-N |
DXi9000 Series - Fibre Channel | DXi9000, DXi9100 |
Quest
Quest - Support with Windows / Linux
VTL Family - Interface | Virtual Tape Drive | Software Version | Inquiry String | Attributes | Windows Server 2012 x64 | Windows Server 2016 x64 | Windows Server 2019 x64 | Red Hat Enterprise Linux on x86-64 |
---|---|---|---|---|---|---|---|---|
DR 13g Series (Dell) - Fibre Channel | IBM LTO - all generations | Latest from Manufacturer | DELL^^^^DR_L700 | Datacenter | Datacenter | Datacenter | 7 | |
Quest - Family Membership
VTL Family - Interface | Members |
---|---|
DR 13g Series (Dell) - Fibre Channel | DR4300 (Dell), DR4300e (Dell), DR6300 (Dell) |
Spectra Logic
Spectra Logic - Support with NetBackup Appliance
VTL Family - Interface | Virtual Tape Drive | Software Version | Inquiry String | Attributes | 5200 Series | 5300 Series |
---|---|---|---|---|---|---|
nTier VTL (RedHat 5.3 VTL Server Platform) - Fibre Channel | IBM LTO - all generations | Latest from Manufacturer | FALCON^^VTL | DirCpy_Shr | Yes | Yes |
Spectra Logic - Support with Windows / Linux
VTL Family - Interface | Virtual Tape Drive | Software Version | Inquiry String | Attributes | Windows Server 2012 x64 | Windows Server 2016 x64 | Windows Server 2019 x64 | Red Hat Enterprise Linux on x86-64 | SUSE Linux Enterprise Server on x86-64 |
---|---|---|---|---|---|---|---|---|---|
nTier VTL (RedHat 5.3 VTL Server Platform) - Fibre Channel | Hewlett Packard Enterprise LTO - all generations | Latest from Manufacturer | FALCON^^VTL | DirCpy_Shr | Datacenter | Datacenter | Datacenter | 7 | 12, 15 |
nTier VTL (RedHat 5.3 VTL Server Platform) - Fibre Channel | IBM LTO - all generations | Latest from Manufacturer | FALCON^^VTL | DirCpy_Shr | Datacenter | Datacenter | Datacenter | 7 | 12, 15 |
Tandberg
Spectra Logic - Support with NetBackup Appliance
VTL Family - Interface | Virtual Tape Drive | Software Version | Inquiry String | Attributes | 5200 Series | 5300 Series |
---|---|---|---|---|---|---|
nTier VTL (RedHat 5.3 VTL Server Platform) - Fibre Channel | IBM LTO - all generations | Latest from Manufacturer | FALCON^^VTL | DirCpy_Shr | Yes | Yes |
Spectra Logic - Support with Windows / Linux
VTL Family - Interface | Virtual Tape Drive | Software Version | Inquiry String | Attributes | Windows Server 2012 x64 | Windows Server 2016 x64 | Windows Server 2019 x64 | Red Hat Enterprise Linux on x86-64 | SUSE Linux Enterprise Server on x86-64 |
---|---|---|---|---|---|---|---|---|---|
nTier VTL (RedHat 5.3 VTL Server Platform) - Fibre Channel | Hewlett Packard Enterprise LTO - all generations | Latest from Manufacturer | FALCON^^VTL | DirCpy_Shr | Datacenter | Datacenter | Datacenter | 7 | 12, 15 |
nTier VTL (RedHat 5.3 VTL Server Platform) - Fibre Channel | IBM LTO - all generations | Latest from Manufacturer | FALCON^^VTL | DirCpy_Shr | Datacenter | Datacenter | Datacenter | 7 | 12, 15 |
Tandberg - Family Membership
VTL Family - Interface | Members |
---|---|
DPS1000 Series VTL - iSCSI | DPS1100 VTL, DPS1200 VTL |
Tape Libraries
Tape library support information is listed below. This information is organized by vendor and provides information on the inquiry string (vendor ID + product ID), the method(s) of controlling the robot, and any other important notes about the hardware and its compatibility.
Tape Libraries - Considerations | Tape Libraries - NetBackup Robot Types | Tape Libraries - Legend | Tape Libraries - Vendor Compatibility
Tape Libraries - Considerations
Subject | Notes |
---|---|
Support assumptions |
For details on supported operating systems, please refer to the "NetBackup 10.0 - 10.x.x Operating System Software Compatibility List".
1. The tables in this section show robotic support only, not tape drive support. Refer to the Tape Drives section of this document to ensure that the specific drive used in the library is supported on the desired OS platform(s). The library vendor must also support the library and drive combination. 2. Firmware versions are not listed in this section. Veritas recommends using the most recent version of firmware available when you configure the library with NetBackup. When a minimum firmware version is required, it will be listed in the Notes column. If a firmware version is causing a problem, Veritas will work with the hardware vendor to resolve the problem. Veritas and most hardware vendors listed are members of TSANet. 3. ACS robots are supported with NetBackup Enterprise Server only. ACS robots are not supported with NetBackup Server. 4. For ACS robots the "Inquiry String" column is intentionally left blank. 5. Where support is shown for "Red Hat Enterprise Linux" it also means that CentOS and Oracle Linux are supported. 6. SUSE Linux Enterprise Server 12 support requires SP3 or later. 7. SAS Tape Libraries are not supported on NetBackup 5x50 and later series appliances. |
Configuration considerations |
1. Library partitioning is supported unless noted otherwise.
2. Library expansion modules are supported unless noted otherwise. 3. Configuring persistent robotic paths for Linux media servers is supported with NetBackup 8.3 and later. To enable this functionality, you can download a Linux rules file from the Veritas Support Downloads Center. When the downloaded rules file is installed in the specified directory, NetBackup uses /dev/tape/by-path type paths that persist across SAN interruptions. If this rules file is not present, NetBackup continues to use the /dev/sg type paths. |
Tape Libraries - NetBackup Robot Types
These tables list operating system platform support for each NetBackup robotic daemon type. For more information about configuring robot types, see the "NetBackup Device Configuration Guide".
Tape Libraries - ACS Robot Type Considerations
Subject | Notes |
---|---|
Support assumptions |
For details on supported operating systems, please refer to the "NetBackup 10.0 - 10.x.x Operating System Software Compatibility List".
1. ACS robots are supported with NetBackup Enterprise Server only. ACS robots are not supported with NetBackup Server. 2. Where support is shown for "Red Hat Enterprise Linux" it also means that CentOS and Oracle Linux are supported. |
Vendor support considerations |
1. The ACSLS version must be currently supported by Oracle.
2. ACSLS 8.0, 8.1, 8.2, 8.3, 8.4, 8.5, 8.5.1 and 8.5.2 are supported with NetBackup 10.0 and later. Earlier ACSLS versions are not supported. 3. The Logical Libraries feature introduced in ACSLS 8.0 is supported with libraries for which both ACS and TLD support is listed. 4. LibAttach is required with Windows media servers. The LibAttach version must be currently supported by Oracle. 5. LibAttach 1.4.2 and 1.4.3 are supported with NetBackup 10.0 and later. Earlier LibAttach versions are not supported. |
Configuration considerations | 1. If a version of ACSLS contains a media type that is not yet supported by NetBackup, that media type can be configured as type UNKNOWN. NetBackup can support one and only one UNKNOWN media type. However, if errors or anomalies occur, upgrading NetBackup to a version where the media type is supported may be necessary. In general, Veritas testing occurs at the NetBackup version level where the new media type support is added, or at a level where known bugs are addressed. |
ACS - Oracle Automated Cartridge System - Supported Operating Systems
Operating System | NetBackup 10.0 (or later) Start of Support |
---|---|
NDMP | 10.0 |
Red Hat Enterprise Linux on x86-64 | 10.0 |
SUSE Linux Enterprise Server on x86-64 | 10.0 |
Windows Server 2012 x64 | 10.0 [1] |
| |
Windows Server 2016 x64 | Not supported |
Windows Server 2019 x64 | Not supported |
Windows Server 2022 x64 | Not supported |
ACS - Oracle Automated Cartridge System - Supported Drive Types
ACSLS Drive Types | NetBackup 10.0 (or later) Start of Support |
---|---|
4480 | 10.0 |
4490 | 10.0 |
4890 | 10.0 |
9490 | 10.0 |
9491 | 10.0 |
9840 | 10.0 |
9840-3590 | 10.0 |
9940-3590 | 10.0 |
CER-LTO | 10.0 |
CER-LTO-2 | 10.0 |
CER-LTO-3 | 10.0 |
DLT2000 | 10.0 |
DLT2000XT | 10.0 |
DLT4000 | 10.0 |
DLT7000 | 10.0 |
DLT8000 | 10.0 |
DLT-S4 | 10.0 |
HP-LTO | 10.0 |
HP-LTO-2 | 10.0 |
HP-LTO-3 | 10.0 |
HP-LTO-4 | 10.0 |
HP-LTO-5 | 10.0 |
HP-LTO-6 | 10.0 |
HP-LTO-7 | 10.0 |
IBM-LTO | 10.0 |
IBM-LTO-2 | 10.0 |
IBM-LTO-3 | 10.0 |
IBM-LTO-4 | 10.0 |
IBM-LTO-5 | 10.0 |
IBM-LTO-6 | 10.0 |
IBM-LTO-7 | 10.0 |
IBM-LTO-8 | 10.0 |
IBM-LTO-9 | 10.0.0.1 |
QNT-LTO-4 | 10.0 |
SD3 | 10.0 |
SDLT | 10.0 |
SDLT-320 | 10.0 |
SDLT-600 | 10.0 |
T1A | 10.0 |
T1A35 | 10.0 |
T1AE | 10.0 |
T1AE35 | 10.0 |
T1B | 10.0 |
T1B35 | 10.0 |
T1BE | 10.0 |
T1BE35 | 10.0 |
T1C | 10.0 |
T1C35 | 10.0 |
T1CE | 10.0 |
T1CE35 | 10.0 |
T1D | 10.0 |
T1D35 | 10.0 |
T1DE | 10.0 |
T1DE35 | 10.0 |
T1D-Eth | 10.0 |
T1DpEth | 10.0 |
T9840B | 10.0 |
T9840B35 | 10.0 |
T9840C | 10.0 |
T9840C35 | 10.0 |
T9840CE | 10.0 |
T9840CE5 | 10.0 |
T9840D | 10.0 |
T9840D35 | 10.0 |
T9840DE | 10.0 |
T9840DE5 | 10.0 |
T9940A | 10.0 |
T9940B | 10.0 |
T9940B35 | 10.0 |
VDRIVE | 10.0 |
VIRT-DRV | 10.0 |
ACS - Oracle Automated Cartridge System - Supported Media Types
ACSLS Media Types | NetBackup 10.0 (or later) Start of Support |
---|---|
3480 | 10.0 |
3490E | 10.0 |
DD3A | 10.0 |
DD3B | 10.0 |
DD3C | 10.0 |
DD3D | 10.0 |
DLTIII | 10.0 |
DLTIIIXT | 10.0 |
DLTIV | 10.0 |
EECART | 10.0 |
JLABEL | 10.0 |
KLABEL | 10.0 |
LTO_1_5_T | 10.0 |
LTO_1_5_W | 10.0 |
LTO_2_5_T | 10.0 |
LTO_2_5_W | 10.0 |
LTO_6_4_T | 10.0 |
LTO_6_4_W | 10.0 |
LTO_12_T | 10.0 |
LTO_12_W | 10.0 |
LTO_18_T | 10.0.0.1 |
LTO_18_W | 10.0.0.1 |
LTO_10GB | 10.0 |
LTO_35GB | 10.0 |
LTO_50GB | 10.0 |
LTO_100G | 10.0 |
LTO_200G | 10.0 |
LTO_400G | 10.0 |
LTO_400W | 10.0 |
LTO_800G | 10.0 |
LTO_800W | 10.0 |
LTO_CLN1 | 10.0 |
LTO_CLN2 | 10.0 |
LTO_CLN3 | 10.0 |
LTO_CLNU | 10.0 |
SDLT | 10.0 |
SDLT_2 | 10.0 |
SDLT_4 | 10.0 |
SDLT_S1 | 10.0 |
SDLT_S2 | 10.0 |
SDLT_S3 | 10.0 |
SDLT_S4 | 10.0 |
STK1R | 10.0 |
STK1U | 10.0 |
STK1Y | 10.0 |
STK2P | 10.0 |
STK2W | 10.0 |
T10000CC | 10.0 |
T10000CL | 10.0 |
T10000CT | 10.0 |
T10000T1 | 10.0 |
T10000T2 | 10.0 |
T10000TS | 10.0 |
T10000TT | 10.0 |
VIRTUAL | 10.0 |
VCART | 10.0 |
TLD - Tape Library DLT - Supported Operating Systems
Operating System | NetBackup 10.0 (or later) Start of Support |
---|---|
NDMP | 10.0 |
Red Hat Enterprise Linux on x86-64 | 10.0 |
SUSE Linux Enterprise Server on x86-64 | 10.0 |
Windows Server 2012 x64 | 10.0 |
Windows Server 2016 x64 | 10.0 |
Windows Server 2019 x64 | 10.0 |
Windows Server 2022 x64 | 10.0 |
Tape Libraries - Legend
The following table describes terms and symbols used in the Tape Libraries - Vendor Compatibility tables.
Tape Libraries - Legend
Value | Meaning |
---|---|
Multi LUN | The device is a Multi-LUN based library. |
SCSI ID | The device is a SCSI ID based library. |
^ | Character used to denote a space in the INQUIRY STRING. |
Tape Libraries - Vendor Compatibility
Dell EMC | Fujitsu | H3C | Hewlett Packard Enterprise | Hitachi Vantara | IBM | NEC | Oracle | Overland Storage | Qualstar | Quantum | Spectra Logic | Tandberg
Dell EMC
Device - Interface | Inquiry String | Address Scheme | Robot Type | Notes |
---|---|---|---|---|
ML3 - Fibre Channel | IBM^^^^^3573-TL | Multi LUN | TLD | This library is also supported with NetBackup 5200 Series and 5300 Series Appliances. |
ML3 - SAS | IBM^^^^^3573-TL | Multi LUN | TLD | This library is also supported with the NetBackup 5240 Series Appliance with a SAS tape-out adapter. |
PowerVault ML6000 Series - Fibre Channel | ADIC^^^^Scalar^i500 | Multi LUN | TLD | This library is also supported with NetBackup 5200 Series and 5300 Series Appliances. |
PowerVault TL1000 - SAS | IBM^^^^^3572-TL | Multi LUN | TLD | |
PowerVault TL2000 - Fibre Channel | IBM^^^^^3573-TL | Multi LUN | TLD | This library is also supported with NetBackup 5200 Series and 5300 Series Appliances. |
PowerVault TL2000 - SAS | IBM^^^^^3573-TL | Multi LUN | TLD | This library is also supported with the NetBackup 5240 Series Appliance with a SAS tape-out adapter. |
PowerVault TL4000 - Fibre Channel | IBM^^^^^3573-TL | Multi LUN | TLD | This library is also supported with NetBackup 5200 Series and 5300 Series Appliances. |
PowerVault TL4000 - SAS | IBM^^^^^3573-TL | Multi LUN | TLD | This library is also supported with the NetBackup 5240 Series Appliance with a SAS tape-out adapter. |
Fujitsu
Device - Interface | Inquiry String | Address Scheme | Robot Type | Notes |
---|---|---|---|---|
ETERNUS LT20 S2 - Fibre Channel | FUJITSU^ETERNUS^LT^S2 | Multi LUN | TLD | This library is also supported with NetBackup 5200 Series and 5300 Series Appliances. |
ETERNUS LT20 S2 - SAS | FUJITSU^ETERNUS^LT^S2 | Multi LUN | TLD | This library is also supported with the NetBackup 5240 Series Appliance with a SAS tape-out adapter. |
ETERNUS LT40 S2 - Fibre Channel | FUJITSU^ETERNUS^LT^S2 | Multi LUN | TLD | This library is also supported with NetBackup 5200 Series and 5300 Series Appliances. |
ETERNUS LT40 S2 - SAS | FUJITSU^ETERNUS^LT^S2 | Multi LUN | TLD | This library is also supported with the NetBackup 5240 Series Appliance with a SAS tape-out adapter. |
ETERNUS LT60 S2 - Fibre Channel | FUJITSU^ETERNUS^LT^S2 | Multi LUN | TLD | This library is also supported with NetBackup 5200 Series and 5300 Series Appliances. |
ETERNUS LT60 S2 - SAS | FUJITSU^ETERNUS^LT^S2 | Multi LUN | TLD | This library is also supported with the NetBackup 5240 Series Appliance with a SAS tape-out adapter. |
ETERNUS LT140 - Fibre Channel | FUJITSU^ETERNUS^LT260 | Multi LUN | TLD | This library is also supported with NetBackup 5200 Series and 5300 Series Appliances. |
ETERNUS LT140 - SAS | FUJITSU^ETERNUS^LT260 | Multi LUN | TLD | This library is also supported with the NetBackup 5240 Series Appliance with a SAS tape-out adapter. |
ETERNUS LT260 - Fibre Channel | FUJITSU^ETERNUS^LT260 | Multi LUN | TLD | This library is also supported with NetBackup 5200 Series and 5300 Series Appliances. |
ETERNUS LT260 - SAS | FUJITSU^ETERNUS^LT260 | Multi LUN | TLD | This library is also supported with the NetBackup 5240 Series Appliance with a SAS tape-out adapter. |
ETERNUS LT270 S2 - Fibre Channel | ETERNUS^LT270S2 | SCSI ID | TLD | This library is also supported with NetBackup 5200 Series and 5300 Series Appliances. |
H3C
Device - Interface | Inquiry String | Address Scheme | Robot Type | Notes |
---|---|---|---|---|
CT108 - Fibre Channel | HP^^^^^^1x8^G2^AUTOLDR | Multi LUN | TLD | This library is also supported with NetBackup 5200 Series and 5300 Series Appliances. |
CT108 - SAS | HP^^^^^^1x8^G2^AUTOLDR | Multi LUN | TLD | This library is also supported with the NetBackup 5240 Series Appliance with a SAS tape-out adapter. |
CT224 - Fibre Channel | HP^^^^^^MSL^G3^Series | Multi LUN | TLD | This library is also supported with NetBackup 5200 Series and 5300 Series Appliances. |
CT224 - SAS | HP^^^^^^MSL^G3^Series | Multi LUN | TLD | This library is also supported with the NetBackup 5240 Series Appliance with a SAS tape-out adapter. |
CT448 - Fibre Channel | HP^^^^^^MSL^G3^Series | Multi LUN | TLD | This library is also supported with NetBackup 5200 Series and 5300 Series Appliances. |
CT448 - SAS | HP^^^^^^MSL^G3^Series | Multi LUN | TLD | This library is also supported with the NetBackup 5240 Series Appliance with a SAS tape-out adapter. |
CT7680 - Fibre Channel | HP^^^^^^MSL6480 | Multi LUN | TLD | Barcode labels are strongly recommended. This library is also supported with NetBackup 5200 Series and 5300 Series Appliances. |
CT7680 - SAS | HP^^^^^^MSL6480 | Multi LUN | TLD | Barcode labels are strongly recommended. This library is also supported with the NetBackup 5240 Series Appliance with a SAS tape-out adapter. |
Hewlett Packard Enterprise
Device - Interface | Inquiry String | Address Scheme | Robot Type | Notes |
---|---|---|---|---|
1/8 G2 Tape Autoloader - Fibre Channel | HP^^^^^^1x8^G2^AUTOLDR | Multi LUN | TLD | This library is also supported with NetBackup 5200 Series and 5300 Series Appliances. |
1/8 G2 Tape Autoloader - SAS | HP^^^^^^1x8^G2^AUTOLDR | Multi LUN | TLD | This library is also supported with the NetBackup 5240 Series Appliance with a SAS tape-out adapter. |
ESL G3 - Fibre Channel | HP^^^^^^ESL^G3^Series | Multi LUN | TLD | The Automated Media Pool (AMP), Control Path Failover and Data Path Failover features are supported. This library is also supported with NetBackup 5200 Series and 5300 Series Appliances. |
MSL2024 - Fibre Channel | HP^^^^^^MSL^G3^Series | Multi LUN | TLD | Supported with the MSL Library Extender. This library is also supported with NetBackup 5200 Series and 5300 Series Appliances. |
MSL2024 - SAS | HP^^^^^^MSL^G3^Series | Multi LUN | TLD | Supported with the MSL Library Extender. This library is also supported with the NetBackup 5240 Series Appliance with a SAS tape-out adapter. |
MSL3040 - Fibre Channel | HPE^MSL3040 | Multi LUN | TLD | This library is also supported with NetBackup 5200 Series and 5300 Series Appliances. |
MSL3040 - SAS | HPE^MSL3040 | Multi LUN | TLD | This library is also supported with the NetBackup 5240 Series Appliance with a SAS tape-out adapter. |
MSL4048 - Fibre Channel | HP^^^^^^MSL^G3^Series | Multi LUN | TLD | Supported with the MSL Library Extender. This library is also supported with NetBackup 5200 Series and 5300 Series Appliances. |
MSL4048 - SAS | HP^^^^^^MSL^G3^Series | Multi LUN | TLD | Supported with the MSL Library Extender. This library is also supported with the NetBackup 5240 Series Appliance with a SAS tape-out adapter. |
MSL6480 - Fibre Channel | HP^^^^^^MSL6480 | Multi LUN | TLD | Barcode labels are strongly recommended. This library is also supported with NetBackup 5200 Series and 5300 Series Appliances. |
MSL6480 - SAS | HP^^^^^^MSL6480 | Multi LUN | TLD | Barcode labels are strongly recommended. This library is also supported with the NetBackup 5240 Series Appliance with a SAS tape-out adapter. |
MSL8096 - Fibre Channel | HP^^^^^^MSL^G3^Series | Multi LUN | TLD | Supported with the MSL Library Extender. This library is also supported with NetBackup 5200 Series and 5300 Series Appliances. |
Hitachi Vantara
Device - Interface | Inquiry String | Address Scheme | Robot Type | Notes |
---|---|---|---|---|
L1/30A - Fibre Channel | STK^^^^^SL150 | Multi LUN | TLD | This library is also supported with NetBackup 5200 Series and 5300 Series Appliances. |
L1/30A - SAS | STK^^^^^SL150 | Multi LUN | TLD | This library is also supported with the NetBackup 5240 Series Appliance with a SAS tape-out adapter. |
L2/30A - Fibre Channel | STK^^^^^SL150 | Multi LUN | TLD | This library is also supported with NetBackup 5200 Series and 5300 Series Appliances. |
L2/30A - SAS | STK^^^^^SL150 | Multi LUN | TLD | This library is also supported with the NetBackup 5240 Series Appliance with a SAS tape-out adapter. |
L20/300 - Fibre Channel | STK^^^^^SL150 | Multi LUN | TLD | This library is also supported with NetBackup 5200 Series and 5300 Series Appliances. |
L20/300 - SAS | STK^^^^^SL150 | Multi LUN | TLD | This library is also supported with the NetBackup 5240 Series Appliance with a SAS tape-out adapter. |
IBM
Device - Interface | Inquiry String | Address Scheme | Robot Type | Notes |
---|---|---|---|---|
System Storage TS2900 (Machine Type 3572) - SAS | IBM^^^^^3572-TL | Multi LUN | TLD | |
System Storage TS3100 (Machine Type 3573) - SAS | IBM^^^^^3573-TL | Multi LUN | TLD | IBM medium changer driver 6.1.4.8 and above is compatible on Windows. This library is also supported with the NetBackup 5240 Series Appliance with a SAS tape-out adapter. |
System Storage TS3200 (Machine Type 3573) - Fibre Channel | IBM^^^^^3573-TL | Multi LUN | TLD | IBM medium changer driver 6.1.4.8 and above is compatible on Windows. This library is also supported with NetBackup 5200 Series and 5300 Series Appliances. |
System Storage TS3200 (Machine Type 3573) - SAS | IBM^^^^^3573-TL | Multi LUN | TLD | IBM medium changer driver 6.1.4.8 and above is compatible on Windows. This library is also supported with the NetBackup 5240 Series Appliance with a SAS tape-out adapter. |
System Storage TS3310 (Machine Type 3576) - Fibre Channel | IBM^^^^^3576-MTL | Multi LUN | TLD | IBM medium changer driver 6.1.4.8 and above is compatible on Windows. This library is also supported with NetBackup 5200 Series and 5300 Series Appliances. |
System Storage TS3400 (Machine Type 3577) - Fibre Channel | IBM^^^^^3577-TL | Multi LUN | TLD | IBM medium changer driver 6.1.4.8 and above is compatible on Windows. This library is also supported with NetBackup 5200 Series and 5300 Series Appliances. |
System Storage TS3500 (Machine Type 3584) - Fibre Channel | IBM^^^^^03584 | Multi LUN | TLD | IBM Advanced Library Management System (ALMS) is supported with the exception of ALMS drive sharing. IBM medium changer driver 6.1.4.8 and above is compatible on Windows. This library is also supported with NetBackup 5200 Series and 5300 Series Appliances. |
System Storage TS4300 (Machine Type 3555) - Fibre Channel | IBM^^^^^3573-TL | Multi LUN | TLD | IBM medium changer driver 6.1.4.8 and above is compatible on Windows. This library is also supported with NetBackup 5200 Series and 5300 Series Appliances. |
System Storage TS4300 (Machine Type 3555) - SAS | IBM^^^^^3573-TL | Multi LUN | TLD | This library is also supported with the NetBackup 5240 Series Appliance with a SAS tape-out adapter. |
System Storage TS4500 (Machine Type 3584) - Fibre Channel | IBM^^^^^03584 | Multi LUN | TLD | This library is also supported with NetBackup 5200 Series and 5300 Series Appliances. |
NEC
Device - Interface | Inquiry String | Address Scheme | Robot Type | Notes |
---|---|---|---|---|
LL009F - SAS | NEC^^^^^LL009F | Multi LUN | TLD | Firmware version 0004 or later is required. |
T30A - SAS | NEC^^^^^LL-2B01 | Multi LUN | TLD | Firmware version 0003 or later is required. This library is also supported with the NetBackup 5240 Series Appliance with a SAS tape-out adapter. |
T60A - SAS | NEC^^^^^LL-2B01 | Multi LUN | TLD | Firmware version 0003 or later is required. This library is also supported with the NetBackup 5240 Series Appliance with a SAS tape-out adapter. |
T280 (Machine Type 3555) - Fibre Channel | IBM^^^^^3573-TL | Multi LUN | TLD | This library is also supported with NetBackup 5200 Series and 5300 Series Appliances. |
T280 (Machine Type 3555) - SAS | IBM^^^^^3573-TL | Multi LUN | TLD | This library is also supported with the NetBackup 5240 Series Appliance with a SAS tape-out adapter. |
Oracle
Device - Interface | Inquiry String | Address Scheme | Robot Type | Notes |
---|---|---|---|---|
StorageTek SL150 - Ethernet | STK^^^^^SL150 | Multi LUN | ACS | This library is also supported with NetBackup 5200 Series and 5300 Series Appliances. |
StorageTek SL150 - Fibre Channel | STK^^^^^SL150 | Multi LUN | TLD | This library is also supported with NetBackup 5200 Series and 5300 Series Appliances. |
StorageTek SL3000 - Ethernet | STK^^^^^ACSLS-SCSI | SCSI ID | ACS | This library is also supported with NetBackup 5200 Series and 5300 Series Appliances. |
StorageTek SL3000 - Fibre Channel | STK^^^^^SL3000 | SCSI ID | ACS, TLD | This library is also supported with NetBackup 5200 Series and 5300 Series Appliances. |
StorageTek SL4000 - Ethernet | STK^^^^^ACSLS-SCSI | SCSI ID | ACS | This library is also supported with NetBackup 5200 Series and 5300 Series Appliances. |
StorageTek SL4000 - Fibre Channel | STK^^^^^SL4000 | SCSI ID | TLD | This library is also supported with NetBackup 5200 Series and 5300 Series Appliances. |
StorageTek SL8500 - Ethernet | SUN^^^^^ACSLS-SCSI | SCSI ID | ACS | This library is also supported with NetBackup 5200 Series and 5300 Series Appliances. |
Overland Storage
Device - Interface | Inquiry String | Address Scheme | Robot Type | Notes |
---|---|---|---|---|
NEOs series 3rd Generation - Fibre Channel | BDT^^^^^FlexStor^II | Multi LUN | TLD | This library is also supported with NetBackup 5200 Series and 5300 Series Appliances. |
NEOs series 3rd Generation - SAS | BDT^^^^^FlexStor^II | Multi LUN | TLD | This library is also supported with the NetBackup 5240 Series Appliance with a SAS tape-out adapter. |
NEOxl series - Fibre Channel | BDT^^^^^MULTISTAK | Multi LUN | TLD | This library is also supported with NetBackup 5200 Series and 5300 Series Appliances. |
NEOxl series - SAS | BDT^^^^^MULTISTAK | Multi LUN | TLD | This library is also supported with the NetBackup 5240 Series Appliance with a SAS tape-out adapter. |
Qualstar
Device - Interface | Inquiry String | Address Scheme | Robot Type | Notes |
---|---|---|---|---|
Q24 - Fibre Channel | BDT^^^^^FlexStor^II | Multi LUN | This library is also supported with NetBackup 5200 Series and 5300 Series Appliances. | |
Q48 - Fibre Channel | BDT^^^^^FlexStor^II | Multi LUN | TLD | This library is also supported with the NetBackup 5200 Series and 5300 Series Appliances. |
Q48 - SAS | BDT^^^^^FlexStor^II | Multi LUN | TLD | This library is also supported with the NetBackup 5240 Series Appliance with a SAS tape-out adapter. |
Q80 - Fibre Channel | BDT^^^^^MULTISTAK | Multi LUN | TLD | This library is also supported with the NetBackup 5200 Series and 5300 Series Appliances. |
Q80 - SAS | BDT^^^^^MULTISTAK | Multi LUN | TLD | This library is also supported with the NetBackup 5240 Series Appliance with a SAS tape-out adapter. |
Quantum
Device - Interface | Inquiry String | Address Scheme | Robot Type | Notes |
---|---|---|---|---|
Scalar i3 - Fibre Channel | QUANTUM^Scalar^i3-i6 | Multi LUN | TLD | This library is also supported with NetBackup 5200 Series and 5300 Series Appliances. |
Scalar i3 - SAS | QUANTUM^Scalar^i3-i6 | Multi LUN | TLD | This library is also supported with the NetBackup 5240 Series Appliance with a SAS tape-out adapter. |
Scalar i6 - Fibre Channel | QUANTUM^Scalar^i3-i6 | Multi LUN | TLD | The Scalar i6H model is also supported. This library is also supported with NetBackup 5200 Series and 5300 Series Appliances. |
Scalar i6 - SAS | QUANTUM^Scalar^i3-i6 | Multi LUN | TLD | The Scalar i6H model is also supported. This library is also supported with the NetBackup 5240 Series Appliance with a SAS tape-out adapter. |
Scalar i500 - Fibre Channel | Quantum^Scalar^i500 | Multi LUN | TLD | This library is also supported with NetBackup 5200 Series and 5300 Series Appliances. |
Scalar i6000 - Fibre Channel | Quantum^Scalar^i6000 | Multi LUN | TLD | Advanced Path Failover drivers for Red Hat Enterprise Linux 6 and Windows 2008 are supported. This library is also supported with NetBackup 5200 Series and 5300 Series Appliances. |
SuperLoader 3 - SAS | QUANTUM^UHDL | Multi LUN | TLD | This library is also supported with the NetBackup 5240 Series Appliance with a SAS tape-out adapter. |
Spectra Logic
Device - Interface | Inquiry String | Address Scheme | Robot Type | Notes |
---|---|---|---|---|
Spectra Stack - Fibre Channel | SPECTRA^PYTHON | Multi LUN | TLD | Requires NetBackup Device Mappings files version 1.155 or later. This library is also supported with NetBackup 5200 Series and 5300 Series Appliances. |
Spectra Stack - SAS | SPECTRA^PYTHON | Multi LUN | TLD | Requires NetBackup Device Mappings files version 1.155 or later. This library is also supported with the NetBackup 5240 Series Appliance with a SAS tape-out adapter. |
Spectra T-Finity - Fibre Channel | SPECTRA^PYTHON | SCSI ID | TLD | This library is also supported with NetBackup 5200 Series and 5300 Series Appliances. |
Spectra T50e - Fibre Channel | SPECTRA^PYTHON | Multi LUN | TLD | This library is also supported with NetBackup 5200 Series and 5300 Series Appliances. |
Spectra T200 - Fibre Channel | SPECTRA^PYTHON | Multi LUN | TLD | This library is also supported with NetBackup 5200 Series and 5300 Series Appliances. |
Spectra T380 - Fibre Channel | SPECTRA^PYTHON | Multi LUN | TLD | This library is also supported with NetBackup 5200 Series and 5300 Series Appliances. |
Spectra T680 - Fibre Channel | SPECTRA^PYTHON | Multi LUN | TLD | This library is also supported with NetBackup 5200 Series and 5300 Series Appliances. |
Spectra T950 - Fibre Channel | SPECTRA^PYTHON | SCSI ID | TLD | This library is also supported with NetBackup 5200 Series and 5300 Series Appliances. |
Tandberg
Device - Interface | Inquiry String | Address Scheme | Robot Type | Notes |
---|---|---|---|---|
StorageLibrary T24 - Fibre Channel | EXABYTE^MAGNUM^224 | Multi LUN | TLD | This library is also supported with NetBackup 5200 Series and 5300 Series Appliances. This library is available from Overland/Tandberg as the NEOs T24. |
StorageLibrary T40+ - Fibre Channel | TANDBERGStorageLoader | Multi LUN | TLD | This library is also supported with NetBackup 5200 Series and 5300 Series Appliances. This library is available from Overland/Tandberg as the NEOs T48. |
StorageLibrary T40+ - SAS | TANDBERGStorageLoader | Multi LUN | TLD | This library is also supported with the NetBackup 5240 Series Appliance with a SAS tape-out adapter. This library is available from Overland/Tandberg as the NEOs T48. |
StorageLibrary T80+ - Fibre Channel | TANDBERGStorageLoader | Multi LUN | TLD | This library is also supported with NetBackup 5200 Series and 5300 Series Appliances. |
StorageLibrary T80+ - SAS | TANDBERGStorageLoader | Multi LUN | TLD | This library is also supported with the NetBackup 5240 Series Appliance with a SAS tape-out adapter. This library is available from Overland/Tandberg as the NEOxl 80. |
StorageLibrary T120+ - Fibre Channel | TANDBERGStorageLoader | Multi LUN | TLD | This library is also supported with NetBackup 5200 Series and 5300 Series Appliances. This library is available from Overland/Tandberg as the NEOxl 80. |
StorageLibrary T120+ - SAS | TANDBERGStorageLoader | Multi LUN | TLD | This library is also supported with the NetBackup 5240 Series Appliance with a SAS tape-out adapter. This library is available from Overland/Tandberg as the NEOxl 80. |
StorageLibrary T160+ - Fibre Channel | TANDBERGStorageLoader | Multi LUN | TLD | This library is also supported with NetBackup 5200 Series and 5300 Series Appliances. This library is available from Overland/Tandberg as the NEOxl 80. |
StorageLibrary T160+ - SAS | TANDBERGStorageLoader | Multi LUN | TLD | This library is also supported with the NetBackup 5240 Series Appliance with a SAS tape-out adapter. This library is available from Overland/Tandberg as the NEOxl 80. |
Tape Drives
Tape drive support information is listed below, organized by vendor. Under each vendor there are separate tables showing compatibility with NetBackup Appliances and with Linux/Windows operating systems. These tables provide information on the operating system versions supported by the drive, inquiry string (vendor ID + product ID), and other important notes about the hardware and its compatibility.
Tape Drives - Considerations
Subject | Notes |
---|---|
Support assumptions |
For details on supported operating systems, please refer to the "NetBackup 10.0 - 10.x.x Operating System Software Compatibility List".
1. To ensure support, a device (both drive and library where applicable) must be supported by Veritas, the device manufacturer, and the operating system vendor. 2. Firmware versions are not listed in this section. Veritas recommends using the most recent version of firmware available when you configure the drive with NetBackup. When a minimum firmware version is required, it will be listed in the footnotes. If a firmware version is causing a problem, Veritas will work with the hardware vendor to resolve the problem. Veritas and most hardware vendors listed are members of TSANet. 3. Where support is shown for "Windows Server 2012 Datacenter" it also means that the other editions of Windows Server 2012, Windows Storage Server 2012, Windows Server 2012 R2, and Windows Storage Server 2012 R2 are supported. 4. Where support is shown for "Windows Server 2016 Datacenter" it also means that the other editions of Windows Server 2016 and Windows Storage Server 2016 are supported. 5. Where support is shown for "Windows Server 2019 Datacenter" it also means that the other editions of Windows Server 2019 are supported. 6. Where support is shown for "Windows Server 2022 Datacenter" it also means that the other editions of Windows Server 2022 are supported. 7. Where support is shown for "Red Hat Enterprise Linux 7 on x86-64" it also means that CentOS 7 and Oracle Linux 7 are supported. 8. The "ULTRIUM-TD" and the "ULT3580-TD" inquiry strings are interchangeable (both are supported), unless noted otherwise. The "ULTRIUM-HH" and the "ULT3580-HH" inquiry strings are interchangeable (both are supported), unless noted otherwise. 9. Backup Exec Tape Reader is not supported in NetBackup 8.0 and later releases. 10. SUSE Linux Enterprise Server 12 support requires SP3 or later. 11. SAS Tapes drives are not supported on NetBackup 5x50 and later series appliances. |
Vendor support considerations | 1. The list of attributes for each tape drive is based on the most recent drive testing. Check with the device manufacturer to determine the firmware version at which support for a specific attribute was added. |
Configuration considerations |
1. Veritas recommends the use of SCSI Persistent Reserve (SPR) whenever all the hardware in your device path supports it.
Refer to the NetBackup Administrator's Guide for more information on SPR and the types of configurations where SPR may be more effective than the default SPC-2 SCSI reserve and release method.
2. Only tape drives listed in the tables below are supported. Other tape drive models are not supported even if the Virtual Tape Library section shows an emulated version of the drive is supported with NetBackup. 3. For Solaris 10, Veritas recommends running Update 6 (137137-09 for SPARC, 137138-09 for x64) or later. |
OS tape driver considerations | 1. Except where noted, Veritas recommends the use of the operating system's native tape drivers. |
Operational considerations |
1. Tape Alert functionality is supported by all drives, unless noted otherwise.
2. NetBackup supports LTO-7 Type M media, also known as M8 cartridges (LTO-7 cartridges formatted to a new LTO-8 standard, increasing their native capacity), in the following manner: - M8 cartridges are supported with LTO-8 tape drives. - M8 cartridges pre-formatted by the media vendor are supported. - LTO-7 cartridges with an M8 barcode formatted as M8 using hardware vendors' software tools or tape library firmware features (automatic or manual) are supported. - NetBackup does not have the ability to convert LTO-7 cartridges with an M8 barcode to M8 format. - For more information on M8 media (for example, formatting methods, supported barcodes, other technical information), please consult the vendor's documentation. 3. Uninitialized LTO-9 media is not supported with NetBackup. LTO-9 media must run a one-time characterization/optimization step to calibrate the tape before it can be used for backup. This process can take from 12 minutes to 2 hours. If a NetBackup job is assigned a brand new, uninitialized LTO-9 tape cartridge, the mount may time out and mark the assigned tape drive down. To avoid this scenario, you must initialize new LTO-9 cartridges before putting them into a NetBackup volume pool to use for backup. For more information on LTO-9 media initialization and mitigation solutions, consult the following vendor sites: "HPE StoreOpen Software Linux and Mac 3.5 User Guide - LTO-9 Media Initialization" "HPE StoreOpen Software 3.5 for Microsoft Windows User Guide - LTO-9 Media Initialization" "Oracle StorageTek SL150 Modular Tape Library - Library Support of LTO9 Tape Calibration" "Overland Tandberg NEO XL-Series LTO-9 New Media Initialization Technical Brief" "Quantum LTO-9 Media - Frequently Asked Questions (FAQ)" "Spectra Logic - LTO-9 Initialization for Media / LTO-9 Certified Media" |
Tape Drives - Attributes
The following table lists attributes supported with Tape Drives and indicates the NetBackup version (10.0 or later) at which that attribute was first supported.
Attribute | Abbreviation | NetBackup Release Supported |
---|---|---|
SCSI Reservation | SResv | 10.0 |
SCSI Persistent Reservation | SPR | 10.0 |
Write Once, Read Many | WORM | 10.0 |
NetBackup Encryption Key Management Service | KMS | 10.0 |
Append-only mode | Append | 10.0 |
Tape Drives - Vendor Compatibility
Dell EMC
Dell EMC - Support with NetBackup Appliance
Device - Interface | Inquiry String | Attributes | 5200 Series | 5300 Series |
---|---|---|---|---|
PowerVault LTO-6 - Fibre Channel | IBM^^^^^ULTRIUM-TD6 | KMS, SResv, SPR, WORM | Yes | Yes |
PowerVault LTO-6 - SAS | IBM^^^^^ULTRIUM-HH6 | KMS, WORM | Yes [1] | No |
| ||||
PowerVault LTO-6 HH - Fibre Channel | IBM^^^^^ULTRIUM-HH6 | KMS, SResv, SPR, WORM | Yes | Yes |
PowerVault LTO-7 - Fibre Channel | IBM^^^^^ULTRIUM-HH7 | KMS, SResv, SPR, WORM | Yes | Yes |
PowerVault LTO-7 - SAS | IBM^^^^^ULTRIUM-HH7 | KMS, WORM | Yes [1] | No |
| ||||
PowerVault LTO-7 FH FC - Fibre Channel | IBM^^^^^ULTRIUM-TD7 | KMS, SResv, SPR, WORM | Yes | Yes |
PowerVault LTO-8 - Fibre Channel | IBM^^^^^ULTRIUM-HH8 | KMS, SResv, SPR, WORM | Yes | Yes |
PowerVault LTO-8 - SAS | IBM^^^^^ULTRIUM-HH8 | KMS, WORM | Yes [1] | No |
| ||||
PowerVault LTO-8 FH - Fibre Channel | IBM^^^^^ULTRIUM-TD8 | KMS, SResv, SPR, WORM | Yes | Yes |
PowerVault LTO-9 - Fibre Channel [2] | IBM^^^^^ULTRIUM-HH9 | KMS, SResv, SPR | Yes [3] | Yes [3] |
| ||||
PowerVault LTO-9 - SAS [2] | IBM^^^^^ULTRIUM-HH9 | KMS | Yes [3] | Yes [3] |
| ||||
PowerVault LTO5-140 - SAS | IBM^^^^^ULTRIUM-HH5 | KMS, WORM | Yes [1] | No |
| ||||
PowerVault LTO5-140 FH - Fibre Channel | IBM^^^^^ULTRIUM-TD5 | KMS, SResv, SPR, WORM | Yes | Yes |
- Requires the Veritas-supplied SAS tape-out adapter in a NetBackup 5240 Series Appliance running version 3.1 or later.
- Supported with initialized LTO-9 media only! New media must be characterized before being put into a NetBackup volume pool for use. For more information, see the note above in Tape Drives - Operational Considerations.
- The Device Mappings configuration information for this drive is not yet in a NetBackup Appliance release. To auto-configure this drive with the Device Configuration Wizard, install Device Mappings Files package 1.169 or later on another media server in the configuration and restart the services on the Appliance.
Dell EMC - Support with Windows / Linux
Device - Interface | Inquiry String | Attributes | Windows Server 2012 x64 | Windows Server 2016 x64 | Windows Server 2019 x64 | Windows Server 2022 x64 | Red Hat Enterprise Linux on x86-64 | SUSE Linux Enterprise Server on x86-64 |
---|---|---|---|---|---|---|---|---|
PowerVault LTO-6 - Fibre Channel | IBM^^^^^ULTRIUM-TD6 | KMS, SResv, SPR, WORM | Datacenter | Datacenter | Datacenter | No | 7, 8 | 12, 15 |
PowerVault LTO-6 - SAS | IBM^^^^^ULTRIUM-HH6 | KMS, SResv, SPR, WORM | Datacenter | Datacenter | Datacenter | No | 7, 8 | 12, 15 |
PowerVault LTO-6 HH - Fibre Channel | IBM^^^^^ULTRIUM-HH6 | KMS, SResv, SPR, WORM | Datacenter | Datacenter | Datacenter | No | 7, 8 | 12, 15 |
PowerVault LTO-7 - Fibre Channel | IBM^^^^^ULTRIUM-HH7 | KMS, SResv, SPR, WORM | Datacenter | Datacenter | Datacenter | No | 7, 8 | 12, 15 |
PowerVault LTO-7 - SAS | IBM^^^^^ULTRIUM-HH7 | KMS, WORM | Datacenter | Datacenter | Datacenter | No | 7, 8 | 12, 15 |
PowerVault LTO-7 FH FC - Fibre Channel | IBM^^^^^ULTRIUM-TD7 | Append, KMS, SResv, SPR, WORM | Datacenter | Datacenter | Datacenter | No | 7, 8 | 12, 15 |
PowerVault LTO-8 - Fibre Channel | IBM^^^^^ULTRIUM-HH8 | KMS, SResv, SPR, WORM | Datacenter | Datacenter | Datacenter | No | 7, 8 | 12, 15 |
PowerVault LTO-8 - SAS | IBM^^^^^ULTRIUM-HH8 | KMS, WORM | Datacenter | Datacenter | Datacenter | No | 7, 8 | 12, 15 |
PowerVault LTO-8 FH - Fibre Channel | IBM^^^^^ULTRIUM-TD8 | KMS, SResv, SPR, WORM | Datacenter | Datacenter | Datacenter | No | 7, 8 | 12, 15 |
PowerVault LTO-9 - Fibre Channel [1] | IBM^^^^^ULTRIUM-HH9 | KMS, SResv, SPR | No | Datacenter | Datacenter | Datacenter | 7, 8 | 12, 15 |
| ||||||||
PowerVault LTO-9 - SAS [1] | IBM^^^^^ULTRIUM-HH9 | KMS | No | Datacenter | Datacenter | Datacenter | 7, 8 | 12, 15 |
| ||||||||
PowerVault LTO4 HH - SAS | IBM^^^^^ULT3580-HH4 | No | No | No | No | No | 12 | |
PowerVault LTO4-120 - SAS [2] | IBM^^^^^ULTRIUM-TD4 | Datacenter | Datacenter | No | No | 7 | 12 | |
| ||||||||
PowerVault LTO4-120HH - SAS [2] | IBM^^^^^ULTRIUM-HH4 | KMS, SResv, SPR, WORM | Datacenter | No | No | No | No | No |
| ||||||||
PowerVault LTO5 HH - SAS | IBM^^^^^ULT3580-HH5 | No | No | No | No | No | 12 | |
PowerVault LTO5-140 - SAS | IBM^^^^^ULTRIUM-HH5 | KMS, SResv, SPR, WORM | Datacenter | Datacenter | No | No | 7 | 12 |
PowerVault LTO5-140 FH - Fibre Channel | IBM^^^^^ULTRIUM-TD5 | KMS, SResv, SPR, WORM | Datacenter | Datacenter | Datacenter | No | 7 | 12, 15 |
PowerVault LTO6 HH - SAS | IBM^^^^^ULT3580-HH6 | No | No | No | No | No | 12 | |
- Supported with initialized LTO-9 media only! New media must be characterized before being put into a NetBackup volume pool for use. For more information, see the note above in Tape Drives - Operational Considerations.
- For information on tape drivers for this device, refer to the "IBM Tape Driver Support" note that follows the IBM listings in the Tape Drives section of this document.
Hewlett Packard Enterprise
Hewlett Packard Enterprise - Support with NetBackup Appliance
Device - Interface | Inquiry String | Attributes | 5200 Series | 5300 Series |
---|---|---|---|---|
Ultrium 1760 LTO4 - Fibre Channel | HP^^^^^^Ultrium^4-SCSI | KMS, SResv, SPR, WORM | Yes | Yes |
Ultrium 1840 LTO4 - Fibre Channel | HP^^^^^^Ultrium^4-SCSI | KMS, SResv, SPR, WORM | Yes | Yes |
Ultrium 3000 LTO5 - Fibre Channel | HP^^^^^^Ultrium^5-SCSI | KMS, SResv, SPR, WORM | Yes | Yes |
Ultrium 3000 LTO5 - SAS | HP^^^^^^Ultrium^5-SCSI | KMS, WORM | Yes [1] | No |
| ||||
Ultrium 3280 LTO5 - Fibre Channel | HP^^^^^^Ultrium^5-SCSI | KMS, SResv, SPR, WORM | Yes | Yes |
Ultrium 3280 LTO5 - SAS | HP^^^^^^Ultrium^5-SCSI | KMS, WORM | Yes [1] | No |
| ||||
Ultrium 6250 LTO6 - Fibre Channel | HP^^^^^^Ultrium^6-SCSI | KMS, SResv, SPR, WORM | Yes | Yes |
Ultrium 6250 LTO6 - SAS | HP^^^^^^Ultrium^6-SCSI | KMS, WORM | Yes [1] | No |
| ||||
Ultrium 6650 LTO6 - Fibre Channel | HP^^^^^^Ultrium^6-SCSI | KMS, SResv, SPR, WORM | Yes | Yes |
Ultrium 6650 LTO6 - SAS | HP^^^^^^Ultrium^6-SCSI | KMS, WORM | Yes [1] | No |
| ||||
Ultrium 15000 LTO7 - Fibre Channel | HP^^^^^^Ultrium^7-SCSI | KMS, SResv, SPR, WORM | Yes | Yes |
Ultrium 15000 LTO7 - SAS | HP^^^^^^Ultrium^7-SCSI | KMS, WORM | Yes [1] | No |
| ||||
Ultrium 15750 LTO7 - Fibre Channel | HP^^^^^^Ultrium^7-SCSI | KMS, SResv, SPR, WORM | Yes | Yes |
Ultrium 30750 LTO8 - Fibre Channel | HPE^^^^^Ultrium^8-SCSI | KMS, SResv, SPR, WORM | Yes [2] | Yes [2] |
| ||||
Ultrium 30750 LTO8 - SAS | HPE^^^^^Ultrium^8-SCSI | KMS, WORM | Yes [1][2] | Yes [2] |
| ||||
Ultrium 45000 LTO9 - Fibre Channel [3] | HPE^^^^^Ultrium^9-SCSI | KMS, SResv, SPR, WORM | Yes [4] | Yes [4] |
| ||||
Ultrium 45000 LTO9 - SAS [3] | HPE^^^^^Ultrium^9-SCSI | KMS, WORM | Yes [4] | Yes [4] |
|
- Requires the Veritas-supplied SAS tape-out adapter in a NetBackup 5240 Series Appliance running version 3.1 or later.
- Requires NetBackup Appliance version 3.1 or later with NetBackup Appliance cloud configuration and device mappings updates RPM version 1.0.2 or later.
- Supported with initialized LTO-9 media only! New media must be characterized before being put into a NetBackup volume pool for use. For more information, see the note above in Tape Drives - Operational Considerations.
- The Device Mappings configuration information for this drive is not yet in a NetBackup Appliance release. To auto-configure this drive with the Device Configuration Wizard, install Device Mappings Files package 1.169 or later on another media server in the configuration and restart the services on the Appliance.
Hewlett Packard Enterprise - Support with Windows / Linux
Device - Interface | Inquiry String | Attributes | Windows Server 2012 x64 | Windows Server 2016 x64 | Windows Server 2019 x64 | Windows Server 2022 x64 | Red Hat Enterprise Linux on x86-64 | SUSE Linux Enterprise Server on x86-64 |
---|---|---|---|---|---|---|---|---|
Ultrium 1760 LTO4 - Fibre Channel | HP^^^^^^Ultrium^4-SCSI | KMS, SResv, SPR, WORM | Datacenter | Datacenter | Datacenter | No | 7 | 12, 15 |
Ultrium 1760 LTO4 - SAS | HP^^^^^^Ultrium^4-SCSI | Datacenter | Datacenter | No | No | 7 | 12 | |
Ultrium 1840 LTO4 - Fibre Channel | HP^^^^^^Ultrium^4-SCSI | KMS, SResv, SPR, WORM | Datacenter | Datacenter | Datacenter | No | 7 | 12, 15 |
Ultrium 1840 LTO4 - SAS | HP^^^^^^Ultrium^4-SCSI | Datacenter | Datacenter | No | No | 7 | 12 | |
Ultrium 3000 LTO5 - Fibre Channel | HP^^^^^^Ultrium^5-SCSI | KMS, SResv, SPR, WORM | Datacenter | Datacenter | Datacenter | No | 7 | 12, 15 |
Ultrium 3000 LTO5 - SAS | HP^^^^^^Ultrium^5-SCSI | Datacenter | Datacenter | No | No | 7 | 12 | |
Ultrium 3280 LTO5 - Fibre Channel | HP^^^^^^Ultrium^5-SCSI | KMS, SResv, SPR, WORM | Datacenter | Datacenter | Datacenter | No | 7 | 12, 15 |
Ultrium 3280 LTO5 - SAS | HP^^^^^^Ultrium^5-SCSI | Datacenter | Datacenter | No | No | 7 | 12 | |
Ultrium 6250 LTO6 - Fibre Channel | HP^^^^^^Ultrium^6-SCSI | KMS, SResv, SPR, WORM | Datacenter | Datacenter | Datacenter | No | 7, 8 | 12, 15 |
Ultrium 6250 LTO6 - SAS | HP^^^^^^Ultrium^6-SCSI | Datacenter | Datacenter | No | No | 7 | 12 | |
Ultrium 6650 LTO6 - Fibre Channel | HP^^^^^^Ultrium^6-SCSI | KMS, SResv, SPR, WORM | Datacenter | Datacenter | Datacenter | No | 7, 8 | 12, 15 |
Ultrium 6650 LTO6 - SAS | HP^^^^^^Ultrium^6-SCSI | Datacenter | Datacenter | No | No | 7 | 12 | |
Ultrium 15000 LTO7 - Fibre Channel | HP^^^^^^Ultrium^7-SCSI | KMS, SResv, SPR, WORM | Datacenter | Datacenter | Datacenter | Datacenter | 7, 8, 9 | 12, 15 |
Ultrium 15000 LTO7 - SAS | HP^^^^^^Ultrium^7-SCSI | KMS, WORM | Datacenter | Datacenter | Datacenter | Datacenter | 7, 8, 9 | 12 |
Ultrium 15750 LTO7 - Fibre Channel | HP^^^^^^Ultrium^7-SCSI | KMS, SResv, SPR, WORM | Datacenter | Datacenter | Datacenter | No | 7, 8 | 12, 15 |
Ultrium 30750 LTO8 - Fibre Channel | HPE^^^^^Ultrium^8-SCSI | KMS, SResv, SPR, WORM | Datacenter | Datacenter | Datacenter | Datacenter | 7, 8, 9 | 12, 15 |
Ultrium 30750 LTO8 - SAS | HPE^^^^^Ultrium^8-SCSI | KMS, WORM | Datacenter | Datacenter | Datacenter | Datacenter | 7, 8, 9 | 12 |
Ultrium 45000 LTO9 - Fibre Channel [1] | HPE^^^^^Ultrium^9-SCSI | KMS, SResv, SPR, WORM | Datacenter | Datacenter | Datacenter | Datacenter | 7, 8, 9 | 12, 15 |
| ||||||||
Ultrium 45000 LTO9 - SAS [1] | HPE^^^^^Ultrium^9-SCSI | KMS, WORM | No | Datacenter | Datacenter | Datacenter | 7, 8, 9 | 12, 15 |
|
- Supported with initialized LTO-9 media only! New media must be characterized before being put into a NetBackup volume pool for use. For more information, see the note above in Tape Drives - Operational Considerations.
IBM
IBM - Support with NetBackup Appliance
Device - Interface | Inquiry String | Attributes | 5200 Series | 5300 Series |
---|---|---|---|---|
System Storage TS1040 (3588 Model F4A) Ultrium 4 - Fibre Channel | IBM^^^^^ULT3580-TD4 | KMS, SResv, SPR, WORM | Yes | Yes |
System Storage TS1050 (3588 Model F5A) Ultrium 5 - Fibre Channel | IBM^^^^^ULT3580-TD5 | KMS, SResv, SPR, WORM | Yes | Yes |
System Storage TS1060 (3588 Model F6A) Ultrium 6 - Fibre Channel | IBM^^^^^ULT3580-TD6 | KMS, SResv, SPR, WORM | Yes | Yes |
System Storage TS1120 (3592 Model E05) - Fibre Channel | IBM^^^^^03592E05 | SResv, SPR, WORM | Yes | Yes |
System Storage TS1130 (3592 Model E06) - Fibre Channel | IBM^^^^^03592E06 | SResv, WORM | Yes | Yes |
System Storage TS1140 (3592 Model E07) - Fibre Channel | IBM^^^^^03592E07 | KMS, SResv, SPR, WORM | Yes | Yes |
System Storage TS1150 (3592 Model E08) - Fibre Channel | IBM^^^^^03592E08 | KMS, SResv, SPR, WORM | Yes | Yes |
System Storage TS1160 (3592 Model 60F) - Fibre Channel | IBM^^^^^0359260F | KMS, SResv, SPR, WORM | Yes | Yes |
System Storage TS2240 Ultrium 4 Half Height - Fibre Channel | IBM^^^^^ULT3580-HH4 | KMS, SResv, SPR, WORM | Yes | Yes |
System Storage TS2250 Ultrium 5 Half Height - Fibre Channel | IBM^^^^^ULT3580-HH5 | KMS, SResv, SPR, WORM | Yes | Yes |
System Storage TS2250 Ultrium 5 Half Height - SAS | IBM^^^^^ULT3580-HH5 | KMS, WORM | Yes [1] | No |
| ||||
System Storage TS2260 Ultrium 6 Half Height - Fibre Channel | IBM^^^^^ULT3580-HH6 | KMS, SResv, SPR, WORM | Yes | Yes |
System Storage TS2260 Ultrium 6 Half Height - SAS | IBM^^^^^ULT3580-HH6 | KMS, WORM | Yes [1] | No |
| ||||
System Storage TS2270 Ultrium 7 Half Height - Fibre Channel | IBM^^^^^ULT3580-HH7 | KMS, SResv, SPR, WORM | Yes | Yes |
System Storage TS2270 Ultrium 7 Half Height - SAS | IBM^^^^^ULT3580-HH7 | KMS, WORM | Yes [1] | No |
| ||||
System Storage TS2280 Ultrium 8 Half Height - Fibre Channel | IBM^^^^^ULT3580-HH8 | KMS, SResv, SPR, WORM | Yes [2] | Yes [2] |
| ||||
System Storage TS2280 Ultrium 8 Half Height - SAS | IBM^^^^^ULT3580-HH8 | KMS, WORM | Yes [1][2] | Yes [2] |
| ||||
System Storage TS2290 Ultrium 9 Half Height - Fibre Channel [3] | IBM^^^^^ULT3580-HH9 | KMS, SResv, SPR | Yes [4] | Yes [4] |
| ||||
System Storage TS2290 Ultrium 9 Half Height - SAS [3] | IBM^^^^^ULT3580-HH9 | KMS | Yes [4] | Yes [4] |
| ||||
System Storage TS2340 Ultrium 4 - Fibre Channel | IBM^^^^^ULT3580-TD4 | KMS, SResv, SPR, WORM | Yes | Yes |
System Storage TS2350 Ultrium 5 - Fibre Channel | IBM^^^^^ULT3580-TD5 | KMS, SResv, SPR, WORM | Yes | Yes |
System Storage TS2350 Ultrium 5 - SAS | IBM^^^^^ULT3580-TD5 | KMS, WORM | Yes | No |
System Storage TS2360 Ultrium 6 - Fibre Channel | IBM^^^^^ULT3580-TD6 | KMS, SResv, SPR, WORM | Yes | Yes |
System Storage TS2360 Ultrium 6 - SAS | IBM^^^^^ULT3580-TD6 | KMS, WORM | Yes | No |
System Storage TS2370 Ultrium 7 - Fibre Channel | IBM^^^^^ULT3580-TD7 | KMS, SResv, SPR, WORM | Yes | Yes |
System Storage TS2380 Ultrium 8 - Fibre Channel | IBM^^^^^ULT3580-TD8 | KMS, SResv, SPR, WORM | Yes [2] | Yes [2] |
| ||||
System Storage TS2390 Ultrium 9 - Fibre Channel [3] | IBM^^^^^ULT3580-TD9 | KMS, SResv, SPR, WORM | Yes [4] | Yes [4] |
| ||||
Ultrium 4 - Fibre Channel | IBM^^^^^ULTRIUM-TD4 | KMS, SResv, SPR, WORM | Yes | Yes |
Ultrium 5 - Fibre Channel | IBM^^^^^ULTRIUM-TD5 | KMS, SResv, SPR, WORM | Yes | Yes |
Ultrium 5 - SAS | IBM^^^^^ULTRIUM-TD5 | KMS, WORM | Yes [1] | No |
| ||||
Ultrium 5 Half Height - SAS | IBM^^^^^ULTRIUM-HH5 | KMS, WORM | Yes [1] | No |
| ||||
Ultrium 6 - Fibre Channel | IBM^^^^^ULTRIUM-TD6 | KMS, SResv, SPR, WORM | Yes | Yes |
Ultrium 6 - SAS | IBM^^^^^ULTRIUM-TD6 | KMS, WORM | Yes [1] | No |
| ||||
Ultrium 6 Half Height - SAS | IBM^^^^^ULTRIUM-HH6 | KMS, WORM | Yes [1] | No |
| ||||
Ultrium 7 - Fibre Channel | IBM^^^^^ULTRIUM-TD7 | KMS, SResv, SPR, WORM | Yes | Yes |
Ultrium 7 - SAS | IBM^^^^^ULTRIUM-TD7 | KMS, WORM | Yes [1] | No |
| ||||
Ultrium 7 Half Height - Fibre Channel | IBM^^^^^ULTRIUM-HH7 | KMS, SResv, SPR, WORM | Yes | Yes |
Ultrium 7 Half Height - SAS | IBM^^^^^ULTRIUM-HH7 | KMS, WORM | Yes [1] | No |
| ||||
Ultrium 8 - Fibre Channel | IBM^^^^^ULTRIUM-TD8 | KMS, SResv, SPR, WORM | Yes [2] | Yes [2] |
| ||||
Ultrium 8 Half Height - Fibre Channel | IBM^^^^^ULTRIUM-HH8 | KMS, SResv, SPR, WORM | Yes [2] | Yes [2] |
| ||||
Ultrium 8 Half Height - SAS | IBM^^^^^ULTRIUM-HH8 | KMS, WORM | Yes [1][2] | Yes [2] |
| ||||
Ultrium 9 - Fibre Channel [3] | IBM^^^^^ULTRIUM-TD9 | KMS, SResv, SPR, WORM | Yes [4] | Yes [4] |
| ||||
Ultrium 9 - SAS [3] | IBM^^^^^ULTRIUM-TD9 | KMS | Yes [4] | Yes [4] |
| ||||
Ultrium 9 Half Height - Fibre Channel [3] | IBM^^^^^ULTRIUM-HH9 | KMS, SResv, SPR | Yes [4] | Yes [4] |
| ||||
Ultrium 9 Half Height - SAS [3] | IBM^^^^^ULTRIUM-HH9 | KMS | Yes [4] | Yes [4] |
|
- Requires the Veritas-supplied SAS tape-out adapter in a NetBackup 5240 Series Appliance running version 3.1 or later.
- Requires NetBackup Appliance version 3.1 or later with NetBackup Appliance cloud configuration and device mappings updates RPM version 1.0.2 or later.
- Supported with initialized LTO-9 media only! New media must be characterized before being put into a NetBackup volume pool for use. For more information, see the note above in Tape Drives - Operational Considerations.
- The Device Mappings configuration information for this drive is not yet in a NetBackup Appliance release. To auto-configure this drive with the Device Configuration Wizard, install Device Mappings Files package 1.169 or later on another media server in the configuration and restart the services on the Appliance.
IBM - Support with Windows / Linux
Device - Interface | Inquiry String | Attributes | Windows Server 2012 x64 | Windows Server 2016 x64 | Windows Server 2019 x64 | Windows Server 2022 x64 | Red Hat Enterprise Linux on x86-64 | SUSE Linux Enterprise Server on x86-64 |
---|---|---|---|---|---|---|---|---|
System Storage TS1040 (3588 Model F4A) Ultrium 4 - Fibre Channel | IBM^^^^^ULT3580-TD4 | KMS, SResv, SPR, WORM | Datacenter | Datacenter | Datacenter | No | 7 | 12, 15 |
System Storage TS1050 (3588 Model F5A) Ultrium 5 - Fibre Channel | IBM^^^^^ULT3580-TD5 | KMS, SResv, SPR, WORM | Datacenter | Datacenter | Datacenter | No | 7 | 12, 15 |
System Storage TS1060 (3588 Model F6A) Ultrium 6 - Fibre Channel | IBM^^^^^ULT3580-TD6 | KMS, SResv, SPR, WORM | Datacenter | Datacenter | Datacenter | No | 7, 8 | 12, 15 |
System Storage TS1070 (3588 Model F7A) Ultrium 7 - Fibre Channel | IBM^^^^^ULT3580-TD7 | KMS, SResv, SPR, WORM | Datacenter | Datacenter | Datacenter | No | 7, 8 | 12, 15 |
System Storage TS1120 (3592 Model E05) - Fibre Channel | IBM^^^^^03592E05 | SResv, SPR, WORM | No | No | No | No | 7 | 12 |
System Storage TS1130 (3592 Model E06) - Fibre Channel | IBM^^^^^03592E06 | SResv, WORM | No | No | No | No | 7 | 12 |
System Storage TS1140 (3592 Model E07) - Fibre Channel | IBM^^^^^03592E07 | KMS, SResv, SPR, WORM | Datacenter | Datacenter | Datacenter | No | 7 | 12, 15 |
System Storage TS1150 (3592 Model E08) - Fibre Channel | IBM^^^^^03592E08 | KMS, SResv, SPR, WORM | Datacenter | Datacenter | Datacenter | No | 7 | 12, 15 |
System Storage TS1155 (3592 Model 55F) - Fibre Channel | IBM^^^^^0359255F | KMS, SResv, SPR, WORM | Datacenter | Datacenter | Datacenter | No | 7 | 12, 15 |
System Storage TS1160 (3592 Model 60F) - Fibre Channel | IBM^^^^^0359260F | KMS, SResv, SPR, WORM | No | Datacenter | Datacenter | No | 7, 8, 9 | 12, 15 |
System Storage TS1170 (3592 Model 70F) - Fibre Channel | IBM^^^^^0359270F | KMS, SResv, SPR | No | No | Datacenter | No | 8, 9 | No |
System Storage TS2240 Ultrium 4 Half Height - Fibre Channel | IBM^^^^^ULT3580-HH4 | KMS, SResv, SPR, WORM | Datacenter | Datacenter | Datacenter | No | 7 | 12, 15 |
System Storage TS2240 Ultrium 4 Half Height - SAS | IBM^^^^^ULT3580-HH4 | KMS, SResv, SPR, WORM | Datacenter | Datacenter | No | No | 7 | 12 |
System Storage TS2250 Ultrium 5 Half Height - Fibre Channel | IBM^^^^^ULT3580-HH5 | KMS, SResv, SPR, WORM | Datacenter | Datacenter | Datacenter | No | 7 | 12, 15 |
System Storage TS2250 Ultrium 5 Half Height - SAS | IBM^^^^^ULT3580-HH5 | KMS, SResv, SPR, WORM | Datacenter | Datacenter | No | No | 7 | 12 |
System Storage TS2260 Ultrium 6 Half Height - Fibre Channel | IBM^^^^^ULT3580-HH6 | KMS, SResv, SPR, WORM | Datacenter | Datacenter | Datacenter | No | 7, 8 | 12, 15 |
System Storage TS2260 Ultrium 6 Half Height - SAS | IBM^^^^^ULT3580-HH6 | KMS, WORM | Datacenter | Datacenter | No | No | 7, 8 | 12 |
System Storage TS2270 Ultrium 7 Half Height - Fibre Channel | IBM^^^^^ULT3580-HH7 | KMS, SResv, SPR, WORM | Datacenter | Datacenter | Datacenter | No | 7, 8 | 12, 15 |
System Storage TS2270 Ultrium 7 Half Height - SAS | IBM^^^^^ULT3580-HH7 | KMS, SResv, SPR, WORM | Datacenter | Datacenter | No | No | 7, 8 | 12 |
System Storage TS2280 Ultrium 8 Half Height - Fibre Channel | IBM^^^^^ULT3580-HH8 | KMS, SResv, SPR, WORM | Datacenter | Datacenter | Datacenter | No | 7, 8 | 15 |
System Storage TS2280 Ultrium 8 Half Height - SAS | IBM^^^^^ULT3580-HH8 | KMS, SResv, SPR, WORM | Datacenter | Datacenter | No | No | 7, 8 | No |
System Storage TS2290 Ultrium 9 Half Height - Fibre Channel [1] | IBM^^^^^ULT3580-HH9 | KMS, SResv, SPR, WORM | No | Datacenter | Datacenter | Datacenter | 7, 8, 9 | 12, 15 |
| ||||||||
System Storage TS2290 Ultrium 9 Half Height - SAS [1] | IBM^^^^^ULT3580-HH9 | KMS | No | Datacenter | Datacenter | Datacenter | 7, 8, 9 | 12, 15 |
| ||||||||
System Storage TS2340 Ultrium 4 - Fibre Channel | IBM^^^^^ULT3580-TD4 | KMS, SResv, SPR, WORM | Datacenter | Datacenter | Datacenter | No | 7 | 12, 15 |
System Storage TS2340 Ultrium 4 - SAS | IBM^^^^^ULT3580-TD4 | KMS, SResv, SPR, WORM | Datacenter | Datacenter | No | No | 7 | 12 |
System Storage TS2350 Ultrium 5 - Fibre Channel | IBM^^^^^ULT3580-TD5 | KMS, SResv, SPR, WORM | Datacenter | Datacenter | Datacenter | No | 7 | 12, 15 |
System Storage TS2350 Ultrium 5 - SAS | IBM^^^^^ULT3580-TD5 | KMS, SResv, SPR, WORM | Datacenter | Datacenter | No | No | 7 | 12 |
System Storage TS2360 Ultrium 6 - Fibre Channel | IBM^^^^^ULT3580-TD6 | KMS, SResv, SPR, WORM | Datacenter | Datacenter | Datacenter | No | 7, 8 | 12, 15 |
System Storage TS2360 Ultrium 6 - SAS | IBM^^^^^ULT3580-TD6 | KMS, WORM | Datacenter | Datacenter | No | No | 7, 8 | 12 |
System Storage TS2370 Ultrium 7 - Fibre Channel | IBM^^^^^ULT3580-TD7 | KMS, SResv, SPR, WORM | Datacenter | Datacenter | Datacenter | No | 7, 8 | 12, 15 |
System Storage TS2380 Ultrium 8 - Fibre Channel | IBM^^^^^ULT3580-TD8 | KMS, SResv, SPR, WORM | Datacenter | Datacenter | Datacenter | No | 7, 8 | 12, 15 |
System Storage TS2390 Ultrium 9 - Fibre Channel [1] | IBM^^^^^ULT3580-TD9 | KMS, SResv, SPR, WORM | No | Datacenter | Datacenter | Datacenter | 7, 8, 9 | 12, 15 |
| ||||||||
System Storage TS2390 Ultrium 9 - SAS [1] | IBM^^^^^ULT3580-TD9 | KMS | No | Datacenter | Datacenter | Datacenter | 7, 8, 9 | 12, 15 |
| ||||||||
Ultrium 4 - Fibre Channel | IBM^^^^^ULTRIUM-TD4 | KMS, SResv, SPR, WORM | Datacenter | Datacenter | Datacenter | No | 7 | 12, 15 |
Ultrium 4 - SAS | IBM^^^^^ULTRIUM-TD4 | KMS, SResv, SPR, WORM | Datacenter | Datacenter | No | No | 7 | 12 |
Ultrium 4 Half Height - Fibre Channel | IBM^^^^^ULTRIUM-HH4 | KMS, SResv, SPR, WORM | Datacenter | Datacenter | Datacenter | No | 7 | 12, 15 |
Ultrium 4 Half Height - SAS | IBM^^^^^ULTRIUM-HH4 | KMS, SResv, SPR, WORM | Datacenter | Datacenter | No | No | 7 | 12 |
Ultrium 5 - Fibre Channel | IBM^^^^^ULTRIUM-TD5 | KMS, SResv, SPR, WORM | Datacenter | Datacenter | Datacenter | No | 7 | 12, 15 |
Ultrium 5 - SAS | IBM^^^^^ULTRIUM-TD5 | KMS, SResv, SPR, WORM | Datacenter | Datacenter | No | No | 7 | 12 |
Ultrium 5 Half Height - Fibre Channel | IBM^^^^^ULTRIUM-HH5 | KMS, SResv, SPR, WORM | Datacenter | Datacenter | Datacenter | No | 7 | 12, 15 |
Ultrium 5 Half Height - SAS | IBM^^^^^ULTRIUM-HH5 | KMS, SResv, SPR, WORM | Datacenter | Datacenter | No | No | 7 | 12 |
Ultrium 6 - Fibre Channel | IBM^^^^^ULTRIUM-TD6 | KMS, SResv, SPR, WORM | Datacenter | Datacenter | Datacenter | No | 7, 8 | 12, 15 |
Ultrium 6 - SAS | IBM^^^^^ULTRIUM-TD6 | KMS, WORM | Datacenter | Datacenter | No | No | 7, 8 | 12 |
Ultrium 6 Half Height - Fibre Channel | IBM^^^^^ULTRIUM-HH6 | KMS, SResv, SPR, WORM | Datacenter | Datacenter | Datacenter | No | 7, 8 | 12, 15 |
Ultrium 6 Half Height - SAS | IBM^^^^^ULTRIUM-HH6 | KMS, SResv, SPR, WORM | Datacenter | Datacenter | No | No | 7, 8 | 12 |
Ultrium 7 - Fibre Channel | IBM^^^^^ULTRIUM-TD7 | KMS, SResv, SPR, WORM | Datacenter | Datacenter | Datacenter | No | 7, 8 | 12, 15 |
Ultrium 7 - SAS | IBM^^^^^ULTRIUM-TD7 | KMS, WORM | Datacenter | Datacenter | No | No | 7, 8 | 12 |
Ultrium 7 Half Height - Fibre Channel | IBM^^^^^ULTRIUM-HH7 | KMS, SResv, SPR, WORM | Datacenter | Datacenter | Datacenter | No | 7, 8 | 12, 15 |
Ultrium 7 Half Height - SAS | IBM^^^^^ULTRIUM-HH7 | KMS, WORM | Datacenter | Datacenter | No | No | 7, 8 | 12 |
Ultrium 8 - Fibre Channel | IBM^^^^^ULTRIUM-TD8 | KMS, SResv, SPR, WORM | Datacenter | Datacenter | Datacenter | No | 7, 8 | 12, 15 |
Ultrium 8 Half Height - Fibre Channel | IBM^^^^^ULTRIUM-HH8 | KMS, SResv, SPR, WORM | Datacenter | Datacenter | Datacenter | No | 7, 8 | 15 |
Ultrium 8 Half Height - SAS | IBM^^^^^ULTRIUM-HH8 | KMS, WORM | Datacenter | Datacenter | No | No | 7, 8 | No |
Ultrium 9 - Fibre Channel [1] | IBM^^^^^ULTRIUM-TD9 | KMS, SResv, SPR, WORM | No | Datacenter | Datacenter | Datacenter | 7, 8, 9 | 12, 15 |
| ||||||||
Ultrium 9 - SAS [1] | IBM^^^^^ULTRIUM-TD9 | KMS | No | Datacenter | Datacenter | Datacenter | 7, 8, 9 | 12, 15 |
| ||||||||
Ultrium 9 Half Height - Fibre Channel [1] | IBM^^^^^ULTRIUM-HH9 | KMS, SResv, SPR, WORM | No | Datacenter | Datacenter | Datacenter | 7, 8, 9 | 12, 15 |
| ||||||||
Ultrium 9 Half Height - SAS [1] | IBM^^^^^ULTRIUM-HH9 | KMS | No | Datacenter | Datacenter | Datacenter | 7, 8, 9 | 12, 15 |
|
- Supported with initialized LTO-9 media only! New media must be characterized before being put into a NetBackup volume pool for use. For more information, see the note above in Tape Drives - Operational Considerations.
--------------------------------------------------------------------
IBM Tape Driver Support
The latest version of the IBM tape device driver package that has been tested with NetBackup is listed below. Using the version listed here is recommended, but older versions of the tape drivers are also supported and may work well. There is no need to upgrade the tape driver if the configuration is working properly. Upgrading to the version listed here may be necessary if implementing the latest model tape drives or if problems are encountered that have been addressed by the driver provider.
If using the IBM Windows Tape Device Drivers be sure to choose the install_nonexclusive.exe executable. This option permits a tape drive to be accessed by multiple processes on a Media Server, which is a requirement for NetBackup.
NetBackup requires the IBM Data Path Failover feature to be disabled on the IBM tape device driver. To disable this feature, open the reg folder of the IBM driver package, double-click DisableDPF.reg, and reboot the system.
- IBMTape driver level 6.2.6.5 tested on Windows
Note: The "ULTRIUM-TD" and the "ULT3580-TD" inquiry strings are interchangeable (both are supported), unless noted otherwise. The "ULTRIUM-HH" and the "ULT3580-HH" inquiry strings are interchangeable (both are supported), unless noted otherwise.
--------------------------------------------------------------------
Oracle
Oracle - Support with NetBackup Appliance
Device - Interface | Inquiry String | Attributes | 5200 Series | 5300 Series |
---|---|---|---|---|
StorageTek T9840D - Fibre Channel | STK^^^^^T9840D | SResv, SPR, WORM | Yes | Yes |
StorageTek T10000B - Fibre Channel | STK^^^^^T10000B | SResv, SPR, WORM | Yes | Yes |
StorageTek T10000C - Fibre Channel [1] | STK^^^^^T10000C | KMS, SResv, SPR, WORM | Yes | Yes |
| ||||
StorageTek T10000D - Fibre Channel [1] | STK^^^^^T10000D | KMS, SResv, SPR, WORM | Yes | Yes |
|
- Oracle's Tape Application Accelerator is supported with this device. NetBackup does not interact with this feature.
Oracle - Support with Windows / Linux
Device - Interface | Inquiry String | Attributes | Windows Server 2012 x64 | Windows Server 2016 x64 | Windows Server 2019 x64 | Red Hat Enterprise Linux on x86-64 | SUSE Linux Enterprise Server on x86-64 |
---|---|---|---|---|---|---|---|
StorageTek T9840D - Fibre Channel | STK^^^^^T9840D | SResv, SPR, WORM | No | No | No | 7 | 12 |
StorageTek T10000B - Fibre Channel | STK^^^^^T10000B | SResv, SPR, WORM | Datacenter | Datacenter | Datacenter | 7 | 12, 15 |
StorageTek T10000C - Fibre Channel [1] | STK^^^^^T10000C | KMS, SResv, SPR, WORM | Datacenter | Datacenter | Datacenter | 7 | 12, 15 |
| |||||||
StorageTek T10000D - Fibre Channel [1] | STK^^^^^T10000D | KMS, SResv, SPR, WORM | Datacenter | Datacenter | Datacenter | 7 | 12, 15 |
| |||||||
VDrive - Fibre Channel | "STK^^^^^VDRIVE | SResv | Datacenter | No | No | 7 | No |
Quantum
Quantum - Support with NetBackup Appliance
Device - Interface | Inquiry String | Attributes | 5200 Series | 5300 Series |
---|---|---|---|---|
LTO-5 FH - SAS | QUANTUM^ULTRIUM^5 | KMS, WORM | Yes [1] | No |
| ||||
LTO-5 HH - SAS | QUANTUM^ULTRIUM^5 | KMS, WORM | Yes [1] | No |
| ||||
LTO-6 HH - SAS | QUANTUM^ULTRIUM^6 | KMS, WORM | Yes [1] | No |
| ||||
Ultrium 8 HH - SAS | QUANTUM^ULTRIUM-HH8 | KMS, WORM | Yes [1][2] | Yes [2] |
| ||||
Ultrium 9 HH - SAS [3] | QUANTUM^ULTRIUM-HH9 | KMS | Yes [4] | Yes [4] |
|
- Requires the Veritas-supplied SAS tape-out adapter in a NetBackup 5240 Series Appliance running version 3.1 or later.
- Requires NetBackup Appliance version 3.1 or later with NetBackup Appliance cloud configuration and device mappings updates RPM version 1.0.2 or later.
- Supported with initialized LTO-9 media only! New media must be characterized before being put into a NetBackup volume pool for use. For more information, see the note above in Tape Drives - Operational Considerations.
- The Device Mappings configuration information for this drive is not yet in a NetBackup Appliance release. To auto-configure this drive with the Device Configuration Wizard, install Device Mappings Files package 1.169 or later on another media server in the configuration and restart the services on the Appliance.
Quantum - Support with Windows / Linux
Device - Interface | Inquiry String | Attributes | Windows Server 2012 x64 | Windows Server 2016 x64 | Windows Server 2019 x64 | Windows Server 2022 x64 | Red Hat Enterprise Linux on x86-64 | SUSE Linux Enterprise Server on x86-64 |
---|---|---|---|---|---|---|---|---|
LTO-4 HH - SAS | QUANTUM^ULTRIUM^4 | Datacenter | Datacenter | No | No | No | No | |
LTO-5 FH - SAS | QUANTUM^ULTRIUM^5 | Datacenter | Datacenter | No | No | 7 | 12 | |
LTO-5 HH - SAS | QUANTUM^ULTRIUM^5 | Datacenter | Datacenter | No | No | 7 | 12 | |
LTO-6 HH - SAS | QUANTUM^ULTRIUM^6 | Datacenter | Datacenter | No | No | 7 | 12 | |
Ultrium 4 HH - SAS | QUANTUM^ULTRIUM-HH4 | KMS, SPR, WORM | Datacenter | Datacenter | No | No | No | No |
Ultrium 5 HH - SAS | QUANTUM^ULTRIUM-HH5 | KMS, SPR, WORM | Datacenter | Datacenter | No | No | No | No |
Ultrium 6 HH - SAS | QUANTUM^ULTRIUM-HH6 | KMS, SPR, WORM | Datacenter | Datacenter | No | No | No | No |
Ultrium 7 HH - SAS | QUANTUM^ULTRIUM-HH7 | KMS, WORM | Datacenter | Datacenter | No | No | No | No |
Ultrium 8 HH - SAS | QUANTUM^ULTRIUM-HH8 | KMS, WORM | Datacenter | Datacenter | No | No | 7 | 12 |
Ultrium 9 HH - SAS [1] | QUANTUM^ULTRIUM-HH9 | KMS | No | Datacenter | Datacenter | Datacenter | 7, 8 | 12, 15 |
|
- Supported with initialized LTO-9 media only! New media must be characterized before being put into a NetBackup volume pool for use. For more information, see the note above in Tape Drives - Operational Considerations.
Tandberg
Tandberg - Support with NetBackup Appliance
Device - Interface | Inquiry String | Attributes | 5200 Series |
---|---|---|---|
HH LTO 5 - SAS | TANDBERGLTO-5^HH | KMS, WORM | Yes [1] |
| |||
HH LTO 6 - SAS | TANDBERGLTO-6^HH | KMS, WORM | Yes [1] |
|
- Requires the Veritas-supplied SAS tape-out adapter in a NetBackup 5240 Series Appliance running version 3.1 or later.
Tandberg - Support with Windows / Linux
Device - Interface | Inquiry String | Attributes | Windows Server 2016 x64 | Red Hat Enterprise Linux on x86-64 | SUSE Linux Enterprise Server on x86-64 |
---|---|---|---|---|---|
HH LTO 4 - SAS | TANDBERGLTO-4^HH | Datacenter | 7 | 12 | |
HH LTO 5 - SAS | TANDBERGLTO-5^HH | Datacenter | 7 | 12 | |
HH LTO 6 - SAS | TANDBERGLTO-6^HH | Datacenter | 7 | 12 | |
NDMP Devices
NDMP device support information is listed below, organized by vendor. The tables provide information on the versions of software tested, supported connection methods and functionality, and other important notes about the hardware and its compatibility.
For information about Operating Systems supported with NDMP, see the NDMP column in the NetBackup Server section for each OS platform in the "NetBackup 10.0 - 10.x.x Operating System Software Compatibility List".
For NetBackup for NDMP vendor-specific configuration information, refer to "NetBackup for NDMP: NAS appliance information".
Minor ("double-dot") or patch versions of the software listed in the tables below are also supported. (Example: "v5.0" means versions v5.0.1, v5.0.2, etc. are also supported.)
Direct Access Restore (DAR) and Directory Direct Access Restore (DDAR) are supported, unless noted otherwise.
NetBackup Appliances and NetBackup Virtual Appliances are supported with the NDMP solutions listed in the tables below. For more information on supported appliance versions, see the "Supported Functionality" subsection under "NetBackup Appliances".
IPv6 support is shown in the tables below.
64-bit inode numbers are supported.
Wildcard characters can be used in regular expressions or the directive ALL_FILESYSTEMS to specify path names in NDMP policy backup selections. For more information on the use of wildcard characters, see the "Wildcard characters in backup selections for an NDMP policy".
NDMP Devices - Connection Methods
The following table describes the supported NDMP connection methods.
Connection Method | Description |
---|---|
Direct-attach | Data travels from disk to a tape device on the same NDMP host, or from disk to tape device on a SAN. Backup data is NOT sent over local network. NOTE: The tape drives must be in NDMP-type storage units. |
Remote | Data travels from the NDMP host, across the local network to a NetBackup media server, to a storage unit connected to the NetBackup media server. |
3-way | Data travels from disk on an NDMP host to a tape device on another NDMP host. Backup data is sent over the local network. NOTE: The tape drives must be in NDMP-type storage units. |
NDMP Devices - Vendor Compatibility
Dell EMC | Dell EMC Data Domain | Dell EMC Isilon | Fujitsu | Hitachi Vantara | Huawei | Imation | Lenovo | NEC | NetApp | Nexenta | Oracle | Stratus Technologies
Dell EMC
Device | Software | Connection Method | IPv6 | NetBackup Stream Handler | NetBackup Shared Storage Option | Notes |
---|---|---|---|---|---|---|
Compellent FS8600 | FluidFS 4.0, FluidFS 5.0, FluidFS 6.0 | Remote, 3-way | Yes | No | No | TYPE=tar environment variable must be set. TYPE=dump backups are not supported. |
DR Series | Dell OS 3.2 | 3-way Target | No | No | No | |
PowerMax series | eNAS for File 8.1 | Direct-attach, Remote, 3-way | No | Yes | Yes | "Incremental forever" backups are supported with this device via the "LEVEL=10" environment variable. For more information on environment variables, see the device vendor's documentation. All models in the Dell EMC PowerMax Series are supported (VMAX AFA, PowerMax 2000, PowerMax 8000). For a list of compatible tape drives and libraries, see Dell EMC's device support matrices. TYPE=tar backups are not recommended with this device. For more information, see Veritas Knowledge base article 100031122 |
PowerStore series | PowerStore OS 1.0, PowerStore OS 2.0, PowerStore OS 2.1, PowerStore OS 3.0, PowerStore OS 3.2, PowerStore OS 3.5, PowerStore OS 3.6, PowerStore OS 4.0 | Remote, 3-way | No | No | No | |
Unity series | Unity Operating Environment 4.1, Unity Operating Environment 4.2, Unity Operating Environment 4.4, Unity Operating Environment 4.5, Unity Operating Environment 5.0, Unity Operating Environment 5.1, Unity Operating Environment 5.2, Unity Operating Environment 5.3, Unity Operating Environment 5.4 | Direct-attach, Remote, 3-way | Yes | Yes | Yes | Direct-attach support requires Unity Operating Environment version 4.4.1.1538211294 or later. For a list of compatible tape drives and libraries, see Dell EMC's device support matrices. SCSI reservations must be enabled manually. For details, see NetBackup for NDMP: NAS appliance information. Shared Storage Option (SSO) support requires Unity Operating Environment version 4.4.1.1538211294 or later. |
VNX2 series | VNX File 8.1 | Direct-attach, Remote, 3-way | No | Yes | Yes | "Incremental forever" backups are supported with this device via the "LEVEL=10" environment variable. For more information on environment variables, see the device vendor's documentation. All models in the Dell EMC VNX2 Series are supported (VNX5200, VNX5400, VNX5600, VNX5800, VNX7600, VNX8000). For a list of compatible tape drives and libraries, see Dell EMC's device support matrices. TYPE=tar backups are not recommended with this device. For more information, see Veritas Knowledge base article 100031122 VNX File 8.1 software requires hotfix 8.1.2.510. |
VNX2e series | VNXe Operating Environment v3.1 | Remote, 3-way | No | Yes | Yes | All models in the Dell EMC VNX2e Series are supported (VNXe1600, VNXe3200). For a list of compatible tape drives and libraries, see Dell EMC's device support matrices. TYPE=tar backups are not recommended with this device. For more information, see Veritas Knowledge base article 100031122 |
VNXe series | VNXe Operating Environment v2.0 | Remote, 3-way | No | Yes | Yes | All models in the Dell EMC VNXe Series are supported (VNXe3100, VNXe3150, VNXe3300). For a list of compatible tape drives and libraries, see Dell EMC's device support matrices. TYPE=tar backups are not recommended with this device. For more information, see Veritas Knowledge base article 100031122 |
VNX series | VNX File 7.1 | Direct-attach, Remote, 3-way | No | Yes | Yes | "Incremental forever" backups are supported with this device via the "LEVEL=10" environment variable. For more information on environment variables, see the device vendor's documentation. All models in the Dell EMC VNX Series are supported (VNX5100, VNX5300, VNX5500, VNX5700, VNX7500). For a list of compatible tape drives and libraries, see Dell EMC's device support matrices. TYPE=tar backups are not recommended with this device. For more information, see Veritas Knowledge base article 100031122 |
Dell EMC Data Domain
Device | Software | Connection Method | IPv6 | NetBackup Stream Handler | NetBackup Shared Storage Option | Notes |
---|---|---|---|---|---|---|
Appliance series | DDOS 5.1, DDOS 5.4 | 3-way Target | No | No | Yes | All models in the Appliance Series are supported. Configure as NDMP Tape Server. |
Dell EMC Isilon
Device | Software | Connection Method | IPv6 | NetBackup Stream Handler | NetBackup Shared Storage Option | Notes |
---|---|---|---|---|---|---|
PowerScale series | OneFS 9.1, OneFS 9.2, OneFS 9.3, OneFS 9.4, OneFS 9.5, OneFS 9.7, OneFS 9.8, OneFS 9.9, OneFS 9.10 | Direct-attach, Remote, 3-way | Yes | Yes | Yes | "Incremental forever" backups are supported with this device via the "LEVEL=10" environment variable. For more information on environment variables, see the device vendor's documentation. For information on OneFS version compatibility with PowerScale models, see the vendor's website. Supported with Accelerator with NDMP with NetBackup 8.1 or later. The Dell EMC Isilon A100 Backup Accelerator is supported with this device. |
Scale-Out NAS | OneFS 7.1, OneFS 8.0, OneFS 8.1, OneFS 8.2, OneFS 9.0 | Direct-attach, Remote, 3-way | Yes | Yes | Yes | "Incremental forever" backups are supported with this device via the "LEVEL=10" environment variable. For more information on environment variables, see the device vendor's documentation. For information on OneFS version compatibility with IQ Storage, HD-Series, N-Series, S-Series, and X-Series models, see the "Isilon Supportability and Compatibility Guide" on the vendor's website. IPv6 is supported with OneFS version 8.0 and later. Supported with Accelerator with NDMP with NetBackup 8.1 or later. The Dell EMC Isilon A100 Backup Accelerator is supported with this device. The Scale-Out NAS line is now known as PowerScale OneFS. The Scale-Out NAS line was previously known as IQ Storage. |
Fujitsu
Device | Software | Connection Method | IPv6 | NetBackup Stream Handler | NetBackup Shared Storage Option | Notes |
---|---|---|---|---|---|---|
ETERNUS AC series | ONTAP v9.14, ONTAP v9.15, ONTAP v9.16 | Direct-attach, Remote, 3-way | Yes | Yes | Yes | "Incremental forever" backups are supported via a combination of the BASE_DATE and REPLICATE environment variables. For more information, see the vendor's documentation.
ETERNUS AC series model AC2100 is supported. Supported with Accelerator with NDMP. Accelerator is not supported on FlexGroup volumes. |
ETERNUS AX series | ONTAP v9.7, ONTAP v9.8, ONTAP v9.9, ONTAP v9.10, ONTAP v9.11, ONTAP v9.12, ONTAP v9.13, ONTAP v9.14, ONTAP v9.15, ONTAP v9.16 | Direct-attach, Remote, 3-way | Yes | Yes | Yes | "Incremental forever" backups are supported via a combination of the BASE_DATE and REPLICATE environment variables. For more information, see the vendor's documentation. All models in the ETERNUS AX series (AX1100, AX1200, AX2100, AX2200, AX4100) are supported. FlexGroup volumes are supported with ONTAP v9.7P12 and later. Supported with Accelerator with NDMP. Accelerator is not supported on FlexGroup volumes. |
ETERNUS HX series | ONTAP v9.7, ONTAP v9.8, ONTAP v9.9, ONTAP v9.10, ONTAP v9.11, ONTAP v9.12, ONTAP v9.13, ONTAP v9.14, ONTAP v9.15, ONTAP v9.16 | Direct-attach, Remote, 3-way | Yes | Yes | Yes | "Incremental forever" backups are supported via a combination of the BASE_DATE and REPLICATE environment variables. For more information, see the vendor's documentation. All models in the ETERNUS HX series (HX2100, HX2200, HX2300, HX6100) are supported. FlexGroup volumes are supported with ONTAP v9.7P12 and later. Supported with Accelerator with NDMP. Accelerator is not supported on FlexGroup volumes. |
Hitachi Vantara
Device | Software | Connection Method | IPv6 | NetBackup Stream Handler | NetBackup Shared Storage Option | Notes |
---|---|---|---|---|---|---|
Data Ingestor (HDI) | FOS 3.2, FOS 4.0, FOS 5.0, FOS 6.0, FOS 6.1, FOS 6.4 | Direct-attach, Remote, 3-way | Yes | No | Yes | FOS 6.1 and earlier versions do not support the NetBackup Shared Storage Option. |
NAS Platform (HNAS) | Hitachi NAS OS 11, Hitachi NAS OS 12, Hitachi NAS OS 13, Hitachi NAS OS 14 | Direct-attach, Remote, 3-way | Yes | No | Yes | "Incremental forever" backups are supported with this device via the "LEVEL=i" environment variable. For more information on environment variables, see the device vendor's documentation. All models in the HNAS 3000 series (3080 G1, 3080 G2, 3090 G1, 3090 G2), HNAS 4000 series (4040, 4060, 4080, 4100), and HNAS 5000 series (5200, 5300) are supported. SCSI reservation is not enabled by default. Please refer to Hitachi Vantara's documentation for details on enabling this setting in a Shared Storage Option (SSO) configuration. Single-dot versions of the software listed are also supported. (Example: "HDS HNAS OS 11" means HDS HNAS versions 11.0, 11.1, 11.2, etc. are also supported.) The HNAS 5000 series is not supported with NDMP over Fibre Channel at this time. |
Virtual File Platform (VFP) | FOS 3.2, FOS 4.0, FOS 5.0, FOS 6.0, FOS 6.1, FOS 6.4 | Direct-attach, Remote, 3-way | Yes | No | Yes | FOS 6.1 and earlier versions do not support the NetBackup Shared Storage Option. |
Huawei
Device | Software | Connection Method | IPv6 | NetBackup Stream Handler | NetBackup Shared Storage Option | Notes |
---|---|---|---|---|---|---|
N8000 series | FileStore 5.5 | Remote, 3-way | No | No | No | |
Imation
Device | Software | Connection Method | IPv6 | NetBackup Stream Handler | NetBackup Shared Storage Option | Notes |
---|---|---|---|---|---|---|
Nexsan NST2000 | NestOS 3.2, Unity 2.0 | Remote, 3-way | No | No | No | Unity 2.0 software requires version 2.0.4 or later. |
Nexsan NST4000 | NestOS 3.2, Unity 2.0 | Remote, 3-way | No | No | No | Unity 2.0 software requires version 2.0.4 or later. |
Nexsan NST5000 | NestOS 2.1, NestOS 3.2, Unity 2.0 | Remote, 3-way | No | No | No | Unity 2.0 software requires version 2.0.4 or later. |
Nexsan NST6000 | NestOS 3.2, Unity 2.0 | Remote, 3-way | No | No | No | Unity 2.0 software requires version 2.0.4 or later. |
Lenovo
Device | Software | Connection Method | IPv6 | NetBackup Stream Handler | NetBackup Shared Storage Option | Notes |
---|---|---|---|---|---|---|
DM3000H | ONTAP v9.9 | Remote, 3-way | No | No | No | |
NEC
Device | Software | Connection Method | IPv6 | NetBackup Stream Handler | NetBackup Shared Storage Option | Notes |
---|---|---|---|---|---|---|
NH4a | FOS 4.0, FOS 5.0 | Direct-attach, Remote, 3-way | No | No | No | |
NH4b | FOS 5.0, FOS 6.0, FOS 6.1 | Direct-attach, Remote, 3-way | No | No | No | |
NH4c | FOS 4.0, FOS 5.0 | Direct-attach, Remote, 3-way | No | No | No | |
NH8a | FOS 4.0, FOS 5.0 | Direct-attach, Remote, 3-way | No | No | No | |
NH8b | FOS 5.0, FOS 6.0, FOS 6.1 | Direct-attach, Remote, 3-way | No | No | No | |
NH8c | FOS 5.0, FOS 6.0, FOS 6.1 | Direct-attach, Remote, 3-way | No | No | No | |
NetApp
Device | Software | Connection Method | IPv6 | NetBackup Stream Handler | NetBackup Shared Storage Option | Notes |
---|---|---|---|---|---|---|
AFF, FAS and V series | Data ONTAP v8.2 (7-Mode), Data ONTAP v8.2 (Cluster-Mode), Data ONTAP v8.3 (Clustered), ONTAP v9.0, ONTAP v9.1, ONTAP v9.2, ONTAP v9.3, ONTAP v9.4, ONTAP v9.5, ONTAP v9.6, ONTAP v9.7, ONTAP v9.8, ONTAP v9.9, ONTAP v9.10, ONTAP v9.11, ONTAP v9.12, ONTAP v9.13, ONTAP v9.14, ONTAP v9.15, ONTAP v9.16 | Direct-attach, Remote, 3-way | Yes | Yes | Yes | "Incremental forever" backups are supported via a combination of the BASE_DATE and REPLICATE environment variables. For more information, see the vendor's documentation. Cluster Aware Backup (CAB) is supported in Clustered Data ONTAP (cDOT) environments. Data ONTAP v8.2 (7-mode) supports MultiStore (vFiler) with Remote and 3-way. Data ONTAP v8.2 (7-mode) supports NetBackup Advanced Client NAS Snapshot. Data ONTAP v8.3 and later do not support 7-mode. FlexGroup volumes are supported with ONTAP v9.7P12 and later. For versions of ONTAP supported with AFF series, see the vendor's compatibility list. IPv6 is supported with Data ONTAP v8.3 and later. NetApp Cloud Volumes ONTAP in Microsoft Azure is also supported. Requires opening port 10000 (NDMP) in Network Security Group rules, whether the environment is all-cloud or a remote media server. SnapLock volumes are supported, however due to the nature of SnapLock volumes, recovery is only possible on alternate volume. Supported with Accelerator with NDMP. Accelerator is not supported on FlexGroup volumes. Supports wildcard characters for backup selections lower than the volume level with all listed ONTAP versions except v8.0 through v8.2 (Cluster-mode). |
Nexenta
Device | Software | Connection Method | IPv6 | NetBackup Stream Handler | NetBackup Shared Storage Option | Notes |
---|---|---|---|---|---|---|
NexentaStor | NexentaStor 4.0.3, NexentaStor 5.1 | Direct-attach, Remote, 3-way | No | No | Yes | NexentaStor 4.0.3 software requires fix pack 3 or later. |
Oracle
Device | Software | Connection Method | IPv6 | NetBackup Stream Handler | NetBackup Shared Storage Option | Notes |
---|---|---|---|---|---|---|
ZFS Storage Appliance series | Oracle OS 2011.04.24, Oracle OS 2013.06.05 | Direct-attach, Remote, 3-way | No | No | Yes | All models in the ZFS Storage 7000 (7x10 and 7x20) and ZS (ZS3-x, ZS4-x, and ZS5-x) Unified Storage System families are supported. |
Stratus Technologies
Device | Software | Connection Method | IPv6 | NetBackup Stream Handler | NetBackup Shared Storage Option | Notes |
---|---|---|---|---|---|---|
V Series | OpenVOS 17.1 | Remote | No | No | No | |
Descriptions of Disk Storage Unit Types
NetBackup permits the creation of an unlimited number of disk storage units. The types of storage units are described in the table below.
Disk Storage Unit Types
BasicDisk
A BasicDisk type storage unit consists of a directory on a locally-attached disk or a network-attached disk that is exposed as a file system to a NetBackup media server. NetBackup stores backup data in the specified directory.
AdvancedDisk
An AdvancedDisk type storage unit is used for a dedicated disk that is directly attached to a NetBackup media server. AdvancedDisk is available only when the Data Protection Optimization Option is licensed. NetBackup assumes exclusive ownership of the disk resources that comprise an AdvancedDisk disk pool. If the resources are shared with other users, NetBackup cannot manage disk pool capacity or storage lifecycle policies correctly. For AdvancedDisk, the NetBackup media servers function as both data movers and storage servers. For more information on configuring AdvancedDisk, see the "NetBackup AdvancedDisk Storage Solutions Guide".
AdvancedDisk - Considerations
Subject | Notes |
---|---|
Support assumptions |
1. Veritas NetBackup has an open support policy for AdvancedDisk storage units.
The storage must be seen as local disk by the NetBackup Media Server, regardless of connection method (SCSI, Fibre Channel, iSCSI, etc), to be supported as an AdvancedDisk storage unit.
Please note: Due to the open support policy, and the range of 3rd party storage solutions, it is the responsibility of the customer to ensure that the chosen storage solution meets the specific performance needs in the specific production environment. Veritas NetBackup features that are performance-dependent, such as Granular Restore Technology (GRT) are not supported with AdvancedDisk storage units. Hybrid storage solutions, with a mix of both local (LAN or FC) and WAN (remote or cloud) based storage tiers, have become available. Thorough testing of these storage solutions, when used as AdvancedDisk storage units, needs to be completed by the customer, to the customer's satisfaction, particularly in the area of restore operations, to ensure that timeouts do not occur. Some specific hybrid storage solutions have been tested as NetBackup AdvancedDisk storage units, in Veritas labs, with joint effort and in cooperation with Veritas storage partners. Resulting white papers and reference materials will appear here: - Microsoft Azure StorSimple: "Configure StorSimple with Veritas NetBackup" All-flash storage solutions are included in the AdvancedDisk open support policy. Some specific all-flash storage solutions have been tested as NetBackup AdvancedDisk storage units, in Veritas labs, with joint effort and in cooperation with Veritas storage partners. Examples are: - Pure Storage FlashBlade - Violin Systems Flash Storage Platform 2. Veritas InfoScale Foundation and Storage Foundation are supported with NetBackup AdvancedDisk. For information on disk arrays that are supported with the InfoScale Foundation or Storage Foundation version you're running, please see "Veritas Services and Operations Readiness Tools (SORT)". 3. AdvancedDisk functionality is subject to all functional limitations as imposed either by the operating system or by the underlying file system. |
Configuration considerations |
1. For UNIX NetBackup Media Servers, AdvancedDisk requires that all LSUs (Logical Storage Units) are active mount points within the UNIX host.
Using the NFS automount feature is not recommended with AdvancedDisk.
2. Access to NFS storage requires NetBackup daemons to run as root. The NFS server exporting the file system must be configured to allow root access to the file system. 3. To ensure support, the disk array must be combined with interconnect hardware that is supported by the disk array manufacturer and the operating system vendor. Refer to the respective vendor's support lists for this information. 4. When installing and configuring HBA drivers it is recommended that the array vendor-qualified HBA drivers be used as opposed to the general HBA drivers that are released for each operating system. These array vendor-qualified HBA drivers are typically found in a separate section of the HBA vendor or array vendor's website, often separated by array model. 5. Performance may vary depending on the array hardware used. |
OpenStorage
An OpenStorage type storage unit is used for disk storage, usually provided by a third party vendor. The actual name of the disk type depends on the vendor. OpenStorage is available only when the OpenStorage Disk Option is licensed. The storage is integrated into NetBackup through an API. The storage vendor partners with Veritas to integrate the storage into NetBackup. The storage host is the storage server. The NetBackup media servers function as the data movers. The storage vendor's plug-in must be installed on each media server that functions as a data mover. The logon credentials to the storage server must be configured on each media server. For more information on configuring OpenStorage, see the "NetBackup OpenStorage Solutions Guide for Disk".
PureDisk
A PureDisk disk type storage unit is used for deduplicated data for Media Server Deduplication Pools (MSDP) storage pools.
Media Server Deduplication Pool (MSDP)
When a Media Server Deduplication Pool is configured, NetBackup deduplicates the data and hosts the storage. MSDP is available only when the NetBackup Data Protection Optimization Option is licensed.
The following all-flash storage solutions have been tested as NetBackup MSDP storage in Veritas labs, with joint effort and in cooperation with Veritas storage partners, and are supported with the following limitations:
Storage Solution | Notes |
---|---|
Pure Storage FlashBlade |
- Requires Purity//FB 3.0.2 or later running NFS version 3.
- Requires Flex 5340 Appliance version 1.3 or later. - Requires Flex NetBackup Images version 8.2 or later. - Requires Flex Add-Ons for NetBackup 8.2: "NetBackup 8.2 Hotfix - MSDP EEB Bundle (Etrack 3981133)" and Flex add-on netfs. - Maximum aggregate size of MSDP pool supported with this device is 250 TB. - NetBackup Client-side deduplication is supported. - NetBackup Accelerator (for files and folders) is supported. - NetBackup Auto Image Replication (A.I.R.) is supported. - Not supported with Veritas Instant Access, Instant Recovery, and Universal Shares. |
Veritas reserves the right to approve customer scenarios on a case-by-case basis prior to confirming support.
For more information on configuring MSDP, see the "NetBackup Deduplication Guide".
Encryption and Security Solutions
Encryption and security solution support information is listed below, organized by solution type.
The following listings do not include specific operating system compatibility. For a list of supported NetBackup Media Server platforms, refer to the "NetBackup 10.0 - 10.x.x Operating System Software Compatibility List".
NetBackup Key Management Service (KMS) | External Key Management Services using KMIP | Single Sign-On using SAML | NetBackup Client Encryption | Third-Party Encryption Solutions | Symantec Security Information Manager | External Credential Management System
NetBackup Key Management Service (KMS)
The NetBackup Key Management Service (KMS) feature is intended to support any tape drive with built-in hardware encryption capability that conforms to the SCSI T10 encryption standard. Each drive model listed in the following table has been tested in Veritas labs to verify that it works with NetBackup correctly, so Veritas recommends using only listed drives with the KMS feature. Refer to the Tape Drives section in this document for the list of platforms and interfaces on which each of the following drives is supported.
Note: KMS is supported on any tape library supported by NetBackup, provided the library vendor supports that library with any of the encryption-capable drives listed in the table below.
NetBackup KMS - Supported Devices
Manufacturer | Model | Notes |
---|---|---|
Dell EMC | PowerVault LTO4-120 | |
Dell EMC | PowerVault LTO5-140 | |
Dell EMC | PowerVault LTO-6 | |
Dell EMC | PowerVault LTO-6 HH | |
Dell EMC | PowerVault LTO-7 | |
Dell EMC | PowerVault LTO-7 HH | |
Hewlett Packard Enterprise | Ultrium 1760 LTO4 | |
Hewlett Packard Enterprise | Ultrium 1840 LTO4 | |
Hewlett Packard Enterprise | Ultrium 3000 LTO5 | |
Hewlett Packard Enterprise | Ultrium 3280 LTO5 | |
Hewlett Packard Enterprise | Ultrium 6250 LTO6 | |
Hewlett Packard Enterprise | Ultrium 6650 LTO6 | |
Hewlett Packard Enterprise | Ultrium 15000 LTO7 | |
Hewlett Packard Enterprise | Ultrium 15750 LTO7 | |
Hewlett Packard Enterprise | Ultrium 30750 LTO8 | |
IBM | System Storage TS1040 Ultrium 4 | Requires firmware version 7BG2 or later. |
IBM | System Storage TS1050 Ultrium 5 | |
IBM | System Storage TS1060 Ultrium 6 | |
IBM | System Storage TS1070 Ultrium 7 | |
IBM | System Storage TS1120 (3592 Model E05) | Requires firmware version 1C15 or later. |
IBM | System Storage TS1130 (3592 Model E06) | Requires firmware version 2480 or later. |
IBM | System Storage TS1140 (3592 Model E07) | |
IBM | System Storage TS1150 (3592 Model E08) | |
IBM | System Storage TS1155 (3592 Model 55F) | |
IBM | System Storage TS2240 Ultrium 4 Half Height | |
IBM | System Storage TS2250 Ultrium 5 Half Height | |
IBM | System Storage TS2260 Ultrium 6 Half Height | |
IBM | System Storage TS2270 Ultrium 7 Half Height | |
IBM | System Storage TS2280 Ultrium 8 Half Height | |
IBM | System Storage TS2340 Ultrium 4 | Requires firmware version 7BG2 or later. |
IBM | System Storage TS2350 Ultrium 5 | |
IBM | System Storage TS2360 Ultrium 6 | |
IBM | System Storage TS2370 Ultrium 7 | |
IBM | System Storage TS2380 Ultrium 8 | |
IBM | Ultrium 4 (OEM) | Requires firmware version 7BG2 or later. |
IBM | Ultrium 4 Half Height (OEM) | |
IBM | Ultrium 5 (OEM) | |
IBM | Ultrium 5 Half Height (OEM) | |
IBM | Ultrium 6 (OEM) | |
IBM | Ultrium 6 Half Height (OEM) | |
IBM | Ultrium 7 (OEM) | |
IBM | Ultrium 7 Half Height (OEM) | |
IBM | Ultrium 8 (OEM) | |
IBM | Ultrium 8 Half Height (OEM) | |
Oracle StorageTek | T10000B | Requires firmware version 1.41.211 or later. |
Oracle StorageTek | T10000C | Requires firmware version 1.53.311 or later. The drive needs manual setup including obtaining the data path key management (DPKM) encryption license from Oracle. |
Oracle StorageTek | T10000D | |
Quantum | LTO-4 HH | Requires firmware version 2190 or later. |
Quantum | LTO-5 FH | |
Quantum | LTO-5 HH | |
Quantum | LTO-6 HH | |
Quantum | LTO-7 HH | |
Quantum | LTO-8 HH | |
Tandberg | HH LTO 5 | |
External Key Management Services using KMIP
External Key Management Services (EKMS) servers using KMIP are supported with NetBackup 8.3 and later.
If an external KMS system requests a key deactivation date to be specified, ensure this key deactivation date is set beyond the expiration time of the longest backup image.
A deactivated key may be utilized for decryption purposes, however some KMS vendors may completely disable a deactivated key. NetBackup read/restore operations would fail in such circumstances; consult your KMS vendor to help transition the key to a deactivated state prior to facilitating data recovery.
External KMS - Considerations
Subject | Notes |
---|---|
Configuration considerations |
1. EKMS is supported with AdvancedDisk, Cloud, MSDP, MSDP Direct Cloud Tiering, and Tape storage solutions supported by NetBackup.
2. The EKMS server must be KMIP-based. 3. NetBackup uses Symmetric Key objects stored on the EKMS server for data encryption. 4. The EKMS server must use PEM formatted certificate-based authentication. 5. The NetBackup primary server should be able to establish an outbound connection to the KMIP port on the EKMS server. |
External KMS - Supported Devices
Manufacturer | Model | EKMS server software version | KMIP version supported |
---|---|---|---|
Entrust | KeyControl | 10.3.1 (b1031000051) | 2.0 |
Fortanix | Data Security Manager (DSM) | 4.2 | 1.0, 1.1, 1.2, 1.3, 1.4 |
HashiCorp | Vault Enterprise KMIP Secrets Engine | 1.13.9, 1.14.5, 1.15.1 | 1.4 |
IBM | Security Key Lifecycle Manager (SKLM) | 2.6 | 1.0, 1.1, 1.2 |
IBM | Security Key Lifecycle Manager (SKLM) | 3.0 | 1.0, 1.1, 1.2, 1.3, 1.4, 2.0 |
IBM | Security Guardium Key Lifecycle Manager (GKLM) | 4.1 | 1.0, 1.1, 1.2, 1.3, 1.4, 2.0, 2.1 |
Oracle | Key Vault | 12.1, 18.1, 18.2 | 1.0, 1.1 |
Thales | CipherTrust Manager K170, K170v, K470, K570 | 1.8, 2.5, 2.7, 2.8, 2.9 | 1.0, 1.1, 1.2, 1.3, 1.4 |
Thales | Gemalto-SafeNet KeySecure K150, K150v | 8.11 | 1.0, 1.1, 1.2, 1.3 |
Thales | Vormetric Data Security Manager (DSM) | 6.4 | 1.0, 1.1, 1.2, 1.3, 1.4, 2.0 |
Utimaco | Enterprise Secure Key Manager | 5.2 | 1.0, 1.1, 1.2, 1.3, 1.4, 2.0 |
External KMS:
NetBackup Sheltered Harbor solution requires cryptographic operations like encrypt, decrypt, sign and verify to be supported on EKMS server to perform secure vaulting. Below are the EKMS servers NetBackup sheltered Harbor solution supports.
Manufacturer | Model | EKMS server software version | KMIP version supported |
---|---|---|---|
Thales | CipherTrust Manager K170, K170v, K470, K570 | 2.5 | 1.2, 1.3, 1.4 |
Thales | CipherTrust Manager K170, K170v, K470, K570 | 2.7 | 1.2, 1.3, 1.4 |
Thales | CipherTrust Manager K170, K170v, K470, K570 | 2.8 | 1.2, 1.3, 1.4 |
Thales | CipherTrust Manager K170, K170v, K470, K570 | 2.9 | 1.2, 1.3, 1.4 |
Utimaco | Enterprise Secure Key Manager | 5.2 | 1.2, 1.3, 1.4, 2.0 |
Single Sign-On using SAML
NetBackup supports authentication via Single Sign-On with SAML. For more information, see Configure NetBackup for Single Sign-On (SSO) in the NetBackup Web UI Administrator's Guide.
Single Sign-On using SAML - Considerations
Subject | Notes |
---|---|
Configuration considerations |
1. To use SSO, you must have a SAML 2.0 compliant identity provider configured in your environment.
2. Only one Active Directory (AD) or LDAP domain is supported for each primary server domain. This feature is not available for local domain users. 3. Configuration of the Identity Provider (IDP) requires the NetBackup APIs or the NetBackup command nbidpcmd. 4. API keys are used to authenticate a user or a group and cannot be used with SAML-authenticated users or groups. 5. Global logout is not supported. |
Single Sign-On with SAML - Supported Solutions
NetBackup Client Encryption
NetBackup Client Encryption is compatible with all disk storage units (DSU), tape drives, tape libraries, and virtual tape libraries supported by NetBackup.
Note: Any DSU type supported by NetBackup can be used with client encryption, although encryption prevents deduplication by Media Server Dedupe, OpenStorage devices, or VTLs.
NetBackup Client Encryption is supported on all NetBackup client platforms except OpenVMS, and is not supported with BMR or SAN client.
Third-Party Encryption Solutions
Support information for vendor-supplied encryption solutions is listed below, organized by vendor. Under each vendor there is a table showing tested solutions, firmware versions tested with that solution, and other important notes about the solution and its compatibility.
The firmware listed in these tables is the firmware that has been tested. Firmware versions newer than those listed are also supported.
Support for specific storage devices such as tape drives, libraries, and virtual devices is not listed in this section. NetBackup will support any hardware that is supported both by the encryption provider and Veritas. Please refer to the other sections of this document for Veritas' support of these storage devices.
Please Note:
The firmware listed on this page is the firmware that has been tested. All firmware versions newer than what is listed are also supported.
Third-Party Encryption Solutions - Vendor Compatibility
Brocade | Cisco Systems | Decru | Fujitsu | Hewlett Packard Enterprise | IBM | NEC | Quantum | SafeNet | Sun StorageTek | Thales (NeoScale)
Brocade
Model | Version | Notes |
---|---|---|
Brocade Encryption Switch | 7.1.0a | Support for Fibre Channel switch-based encryption. Qualified with SafeNet KeySecure encryption key management. NetBackup does not interact with the key management or the encryption process. |
Cisco Systems
Model | Version | Notes |
---|---|---|
MDS9222i | SME 3.2.3 | Support for Storage Media Encryption (SME) fabric service. NetBackup does not interact with the key management or the encryption process. |
Decru
Model | Version | Notes |
---|---|---|
DataFort FC1020 | 2.0-MP | The firmware listed for this device is the version that was tested. All 2.x firmware versions are also supported. |
DataFort FC520 V2 | 2.0-MP, 2.1.0.2 | The firmware listed for this device is the version that was tested. All 2.x firmware versions are also supported. |
DataFort FC525 V2 | 2.0-MP | The firmware listed for this device is the version that was tested. All 2.x firmware versions are also supported. |
Fujitsu
Model | Version | Notes |
---|---|---|
LT220-embedded encryption key management function | 0006 | Support for library-based encryption solution. Refer to the vendor's site for supported drive models. NetBackup does not interact with the key management or the encryption process. |
LT230-embedded encryption key management function | 0005 | Support for library-based encryption solution. Refer to the vendor's site for supported drive models. NetBackup does not interact with the key management or the encryption process. |
LT250-embedded encryption key management function | V20L50 | Support for library-based encryption solution. Refer to the vendor's site for supported drive models. NetBackup does not interact with the key management or the encryption process. |
LT260-embedded encryption key management function | 6.62 | Support for library-based encryption solution. Refer to the vendor's site for supported drive models. NetBackup does not interact with the key management or the encryption process. |
LT270-embedded encryption key management function | V40L50 | Support for library-based encryption solution. Refer to the vendor's site for supported drive models. NetBackup does not interact with the key management or the encryption process. |
LT270 S2-embedded encryption key management function | V10L10 | Support for library-based encryption solution. Refer to the vendor's site for supported drive models. NetBackup does not interact with the key management or the encryption process. |
Hewlett Packard Enterprise
Model | Version | Notes |
---|---|---|
1/8 G2 & MSL G3 Encryption Kit | 2.30, 2.80 (1/8 G2), 4.20, 4.70 (MSL2024), 6.50, 7.00 (MSL4048), 8.90, 9.60 (MSL8048/MSL8096) | Support for library-based encryption solution. NetBackup does not interact with the key management or the encryption process. |
Enterprise Secure Key Manager | 4.8.9 | Support for Enterprise Secure Key Manager (ESKM) appliance. Refer to the vendor's site for supported library and drive models. NetBackup does not interact with the key management or the encryption process. |
Secure Key Manager 1.0 | 4.7.1 | Support for Secure Key Manager appliance. Refer to the vendor's site for supported library and drive models. NetBackup does not interact with the key management or the encryption process. |
Secure Key Manager 1.1 | 4.8.1 | Support for Secure Key Manager appliance. Refer to the vendor's site for supported library and drive models. NetBackup does not interact with the key management or the encryption process. |
IBM
Model | Version | Notes |
---|---|---|
Encryption Key Manager | 20060816, 20070503 | Support for library-based Internal Label Encryption Policy (ILEP) for NetBackup. Refer to the vendor's site for supported library and drive models. NetBackup does not interact with the key management or the encryption process. |
Tivoli Key Lifecycle Manager (TKLM) | 2.0 | Support for library-based encryption solution. Refer to the vendor's site for supported library and drive models. NetBackup does not interact with the key management or the encryption process. |
NEC
Model | Version | Notes |
---|---|---|
T16A2-embedded encryption key management function | 0006 | Support for library-based encryption solution. Refer to the vendor's site for supported drive models. NetBackup does not interact with the key management or the encryption process. |
T30A-embedded encryption key management function | 0002 | Support for library-based encryption solution. Refer to the vendor's site for supported drive models. NetBackup does not interact with the key management or the encryption process. |
T40A2-embedded encryption key management function | 0005 | Support for library-based encryption solution. Refer to the vendor's site for supported drive models. NetBackup does not interact with the key management or the encryption process. |
T60A-embedded encryption key management function | 0002 | Support for library-based encryption solution. Refer to the vendor's site for supported drive models. NetBackup does not interact with the key management or the encryption process. |
T100A-embedded encryption key management function | V20L50 | Support for library-based encryption solution. Refer to the vendor's site for supported drive models. NetBackup does not interact with the key management or the encryption process. |
T100A2-embedded encryption key management function | V20L50 | Support for library-based encryption solution. Refer to the vendor's site for supported drive models. NetBackup does not interact with the key management or the encryption process. |
T700A-embedded encryption key management function | V40L50 | Support for library-based encryption solution. Refer to the vendor's site for supported drive models. NetBackup does not interact with the key management or the encryption process. |
T700A2-embedded encryption key management function | V10L10 | Support for library-based encryption solution. Refer to the vendor's site for supported drive models. NetBackup does not interact with the key management or the encryption process. |
Quantum
Model | Version | Notes |
---|---|---|
Encryption Key Manager | 2.1_007 | Support for library-based encryption solution. Refer to the vendor's site for supported library and drive models. NetBackup does not interact with the key management or the encryption process. |
Scalar Key Manager Appliance | 100Q.GC00800 | Support for library-based encryption solution. Refer to the vendor's site for supported library and drive models. NetBackup does not interact with the key management or the encryption process. |
SafeNet
Model | Version | Notes |
---|---|---|
KeySecure | 6.3.0 | Support for encryption key management. Qualified with Brocade Encryption Switch. NetBackup does not interact with the key management or the encryption process. |
Sun StorageTek
Model | Version | Notes |
---|---|---|
Crypto Key Management System | 1.6.0, 2.0, 2.2 | Support for Crypto Key Management appliance. Refer to the vendor's site for supported library and drive models. NetBackup does not interact with the key management or the encryption process. |
Thales (NeoScale)
Model | Version | Notes |
---|---|---|
CryptoStor FC702 | fc-2.4.0 | |
CryptoStor FC704 | fc-2.4.0 | |
CryptoStor FC712 | fc-2.4.0 | |
CryptoStor SC702 | fc-2.4.0 | |
Symantec Security Information Manager
NetBackup Client is supported with Symantec Security Information Manager (SSIM) v4.8 and later.
For more information on SSIM, see Symantec Security Information Manager (SSIM)
External Credential Management System
External Credential Management System (ECMS) are supported with NetBackup 10.2 and later.
External CMS - Considerations
Subject | Notes |
---|---|
Configuration considerations |
1. CyberArk deployment supported with Central Credential Provider (CCP).
2. While configuring the external CMS server for example, CyberArk server, user can use the DNS hostname or IPV4 address. However, it is recommended to use the DNS hostname for connecting to the host. CyberArk configuration fails if IPV6 address is used. 3. The ECMS server must use PEM formatted certificate-based authentication. 4. The NetBackup primary server should be able to establish an outbound connection to the ECMS server port on the ECMS server. 5. Supports Microsoft SQL server workload. 6. NetBackup 10.3 onwards supports MySQL server and PostgreSQL server workloads. |
External CMS - Supported Devices
Manufacturer | ECMS server software version | Minimum NetBackup version supported |
---|---|---|
CyberArk | 8.0, 10.2, 12.6 | 10.2 |
Fibre Transport Media Server HBAs
This section lists Fibre Channel host bus adapters (HBAs) that have been tested and are supported with the NetBackup Fibre Transport (FT) feature in a Fibre Transport Media Server. This information is organized by vendor and provides information on what operating systems have been tested with each Fibre Channel HBA model. The NetBackup Fibre Transport feature requires loading the FT HBA with firmware contained on the NetBackup distribution media, so only the HBAs listed below will work with this feature.
Fibre Transport Media Server - Considerations | Fibre Transport Media Server - Supported Platforms | Fibre Transport Media Server - Vendor Compatibility
Fibre Transport Media Server - Considerations
Subject | Notes |
---|---|
Support assumptions |
1. A NetBackup SAN Client supports all HBAs (host bus adapters), unless noted otherwise, and is used in conjunction with a NetBackup Fibre Transport Media Server.
The HBA support model for NetBackup SAN Client is an "OPEN" model.
All host bus adapters (HBA), switches, bridges, and routers are supported in a SAN environment, unless noted otherwise.
This means that if a Fibre Channel component is causing a problem, Veritas will work with the component vendor in an attempt to resolve the problem, but resolution is not guaranteed.
Veritas and most hardware vendors listed are members of TSANet.
2. SAN Client is not supported over Fibre Channel over Ethernet (FCoE) using converged network adapters (CNA). |
Vendor support considerations |
1. The SAN Client feature is compatible with the Sun SPARC Enterprise M-Series server architecture, but with limited functionality with regard to Fibre Transport Media Server deployment:
- Support is limited to a maximum of one target mode Fibre Channel HBA in an M-Series server. - Quad-port target mode Fibre Channel HBAs are not supported in an M-Series server. 2. Hitachi Vantara-branded HBAs are not supported with NetBackup SAN Client. 3. When configuring an FT Media Server with an Broadcom/Emulex 16 Gb HBA, disconnect or remove any other 4 Gb HBAs in the server, even if the 4 Gb HBAs are not being used for NetBackup. For more information, see The presence of 4Gb Host Bus Adapter (HBA)s on a Fibre Transport Media Server (FTMS) may cause a system crash |
Fibre Transport Media Server - Supported Platforms
Linux FT Media Servers are supported on the platforms listed in the following table along with the NetBackup version (10.0 or later) at which the platform was first supported. Other RHEL and SLES versions are not supported as an FT Media Server.
Operating System | Supported Versions | Minimum NetBackup (10.0 or later) release supported | Notes |
---|---|---|---|
NetBackup 5200 and 5300 Series Appliance | 5.0, 4.1, 4.0, 3.3.0.1, 3.2 | 10.0 | Supported with 8 Gb HBAs in NetBackup 5230 and 5240 Appliances.
Supported with 16 Gb HBAs in NetBackup 5240, 5250, and 53xx Appliances. |
NetBackup 5200 and 5300 Series Appliance | Flex 2.1 and later | 10.0 | Supported with 16 Gb HBAs in NetBackup 5250, 5340 and 5350 Appliances. |
Red Hat Enterprise Linux 7 on x86-64 | GA through Update 9 | 10.0 | Marvell Qlogic 4 Gb HBAs (QLE2400 series) are not supported with Red Hat Enterprise Linux 7 Update 7 and later.
Marvell Qlogic QLE2692 16 Gb HBAs are supported with Red Hat Enterprise Linux 7 Update 7. Broadcom/Emulex LPe31002 and Marvell Qlogic QLE2692 HBAs are supported with Red Hat Enterprise Linux 7 Update 9. Broadcom/Emulex LPe35000 series HBAs are supported with Red Hat Enterprise Linux 7 Update 9. Requires NetBackup 10.0 and an Emergency Engineering Binary (EEB). Contact Veritas Support and ask for the EEB associated with Etrack 4068095 for NetBackup 10.0. Emulex LPe31002 HBA requires firmware version 12.8.340.8. Emulex LPe35000 series HBAs require firmware version 12.8.542.26. |
Red Hat Enterprise Linux 8 on x86-64 | Update 6 | 10.1.1 | Marvell Qlogic 4 Gb HBAs (QLE2400 series) are not supported.
Marvell Qlogic QLE2692 16 Gb and QLE2562 8 Gb HBAs are supported. Broadcom/Emulex LPe35000/LPe31000 series HBAs are supported. Emulex LPe31000 series and LPe35000 series HBAs require firmware version 12.8.614.17. Marvell Qlogic QLE2770 and QLE2772 32 Gb HBAs are supported from NetBackup 10.3. |
Red Hat Enterprise Linux 8 on x86-64 | Update 8 | 10.4 | Marvell Qlogic 4 Gb HBAs (QLE2400 series) are not supported.
Marvell Qlogic QLE2692 16 Gb and QLE2562 8 Gb HBAs are supported. Broadcom/Emulex LPe35000/LPe31000 series HBAs are supported. Emulex LPe31000 series and LPe35000 series HBAs require firmware version 12.8.614.17. Marvell Qlogic QLE2770 and QLE2772 32 Gb HBAs are supported. |
Fibre Transport Media Server - Vendor Compatibility
Broadcom Emulex | Dell EMC | Hewlett Packard Enterprise | Hitachi Vantara | IBM | Lenovo | Marvell QLogic | Oracle
Broadcom Emulex
Broadcom Emulex - Support with Linux
Device Family | Bus Type | Red Hat Enterprise Linux on x86-64 |
---|---|---|
LPe31000 / LPe32000 series (Gen 6) [1][2] | PCIe | 7 |
| ||
LPe35000 series | PCIe | 7 |
- Fibre Transport Media Server is only supported with the LPe31002 member of this family.
- Requires NetBackup 9.1 or later and Red Hat Enterprise Linux 7 Update 9 or later.
Broadcom Emulex - Family Membership
Device Family | Members |
---|---|
LPe31000 / LPe32000 series (Gen 6) | LPe31000-M6, LPe31002-M6, LPe31004-M6, LPe31004-M6-SIO, LPe32000-M2, LPe32002-M2, LPe32004-M2-SIO |
LPe35000 series | LPe35000-M2, LPe35002-M2, LPe35004-M2 |
Dell EMC
Dell EMC - Support with Linux
Device Family | Bus Type | Red Hat Enterprise Linux on x86-64 | SUSE Linux Enterprise Server on x86-64 |
---|---|---|---|
F641C | PCIe | 7 | 12 |
H144C [1] | PCIe | 7 | 12 |
| |||
LPe35000-D-Series | PCIe | 7 | No |
QLE2560-E | PCIe | 7 | 12 |
QLE2562-E [1] | PCIe | 7 | 12 |
|
- Please see Knowledge Base Article 100005932
Dell EMC - Family Membership
Device Family | Members |
---|---|
LPe35000-D-Series | 406-BBMO/406-BBMQ (LP), 406-BBMP/406-BBMR (FH) |
Hewlett Packard Enterprise
Hewlett Packard Enterprise - Support with Linux
Device Family | Bus Type | Red Hat Enterprise Linux on x86-64 | SUSE Linux Enterprise Server on x86-64 |
---|---|---|---|
AJ764A [1] | PCIe | 7 | 12 |
| |||
AK344A | PCIe | 7 | 12 |
QMH2562-HP-BK | PCIe | No | 12 |
QMH2572-HP-SP | PCIe | No | 12 |
SN1610E series | PCIe | 7 | No |
- Please see Knowledge Base Article 100005932
Hewlett Packard Enterprise - Family Membership
Device Family | Members |
---|---|
SN1610E series | R2J62A (SN1610E), R2J63A (SN1610E) |
Hitachi Vantara
Hitachi Vantara - Support with Linux
Device Family | Bus Type | Red Hat Enterprise Linux on x86-64 | SUSE Linux Enterprise Server on x86-64 |
---|---|---|---|
QLE2560-CK | PCIe | 7 | 12 |
QLE2562-CK [1] | PCIe | 7 | 12 |
|
- Please see Knowledge Base Article 100005932
IBM
IBM - Support with Linux
Device Family | Bus Type | Red Hat Enterprise Linux on x86-64 | SUSE Linux Enterprise Server on x86-64 |
---|---|---|---|
42D0501 | PCIe | 7 | 12 |
42D0510 [1] | PCIe | 7 | 12 |
|
- Please see Knowledge Base Article 100005932
Lenovo
Lenovo - Support with Linux
Device Family | Bus Type | Red Hat Enterprise Linux on x86-64 |
---|---|---|
ThinkSystem Emulex LPe35000 series | PCIe | 7 |
Lenovo - Family Membership
Device Family | Members |
---|---|
ThinkSystem Emulex LPe35000 series | 4XC7A08250, 4XC7A08251, 4XC7A76498, 4XC7A76525 |
Marvell QLogic
Marvell QLogic - Support with Linux
Device Family | Bus Type | Red Hat Enterprise Linux on x86-64 | SUSE Linux Enterprise Server on x86-64 |
---|---|---|---|
QLE2500 series [1] | PCIe | 7 | 12 |
| |||
QLE2690 series [2] | PCIe | 7 | No |
| |||
QLE2770 series [3] | PCIe | 8 | No |
|
- Please see Knowledge Base Article 100005932
- Fibre Transport Media Server is only supported with the QLE2692 member of this family.
- Fibre Transport Media Server is only supported with the QLE2770 and QLE2772 member of this family.
Marvell QLogic - Family Membership
Device Family | Members |
---|---|
QLE2500 series | QLE2560, QLE2562, QLE2562-S, QLE2564, QME2572, QMH2562, QMH2572, QMI2582, QMI3572 |
QLE2690 series | QLE2690, QLE2692, QLE2694, QLE2694L, QLE2694U |
QLE2770 series | QLE2770, QLE2772, QLE2774 |
Infrastructure Used for Testing
The NetBackup Shared Storage Option (SSO) hardware support model for Storage Area Network (SAN) components is an open model. In other words, all Fibre Channel over Ethernet (FCoE) converged network adapters (CNA), Fibre Channel (FC) host bus adapters (HBA), switches, bridges, and routers are supported in a SAN environment. This means that if a FCoE or FC component is causing a problem, Veritas will work with the component vendor in an attempt to resolve the problem, but resolution is not guaranteed. Veritas and most hardware vendors listed are members of TSANet.
Infrastructure - Considerations
Subject | Notes |
---|---|
Vendor support considerations | 1. To ensure compatibility, the device manufacturers and the operating system vendor must support the combination of SAN components. |
CNAs
This list of SAN components represents equipment that has been used during NetBackup qualification testing of devices listed in previous sections of this document. It is not intended to be a list of supported components.
CNAs - Considerations
Subject | Notes |
---|---|
Support assumptions |
For details on supported operating systems, please refer to the "NetBackup 10.0 - 10.x.x Operating System Software Compatibility List".
1. Where support is shown for "Windows Server 2012 Datacenter" it also means that the other editions of Windows Server 2012, Windows Storage Server 2012, Windows Server 2012 R2, and Windows Storage Server 2012 R2 are supported. 2. Where support is shown for "Windows Server 2016 Datacenter" it also means that the other editions of Windows Server 2016 and Windows Storage Server 2016 are supported. 3. Where support is shown for "Windows Server 2019 Datacenter" it also means that the other editions of Windows Server 2019 are supported. 4. Where support is shown for "Windows Server 2022 Datacenter" it also means that the other editions of Windows Server 2022 are supported. 5. Where support is shown for "Red Hat Enterprise Linux 7 on x86-64" it also means that CentOS 7 and Oracle Linux 7 are supported. 6. SUSE Linux Enterprise Server 12 support requires SP3 or later. |
Vendor support considerations | 1. Consult the hardware vendor's web site for current firmware and driver updates (where applicable). |
Configuration considerations | 1. All like CNAs within a SAN should use the same firmware, BIOS and driver revision as recommended by CNA vendors. |
HBAs
This list of SAN components represents equipment that has been used during NetBackup qualification testing of devices listed in previous sections of this document. It is not intended to be a list of supported components.
HBAs - Considerations
Subject | Notes |
---|---|
Support assumptions |
For details on supported operating systems, please refer to the "NetBackup 10.0 - 10.x.x Operating System Software Compatibility List".
1. Where support is shown for "Windows Server 2012 Datacenter" it also means that the other editions of Windows Server 2012, Windows Storage Server 2012, Windows Server 2012 R2, and Windows Storage Server 2012 R2 are supported. 2. Where support is shown for "Windows Server 2016 Datacenter" it also means that the other editions of Windows Server 2016 and Windows Storage Server 2016 are supported. 3. Where support is shown for "Windows Server 2019 Datacenter" it also means that the other editions of Windows Server 2019 are supported. 4. Where support is shown for "Windows Server 2022 Datacenter" it also means that the other editions of Windows Server 2022 are supported. 5. Where support is shown for "Red Hat Enterprise Linux 7 on x86-64" it also means that CentOS 7 and Oracle Linux 7 are supported. 6. SUSE Linux Enterprise Server 12 support requires SP3 or later. |
Vendor support considerations |
1. All like HBAs within a SAN should use the same firmware, BIOS and driver revision as recommended by HBA vendors.
2. Consult the hardware vendor's web site for current firmware and driver updates (where applicable). |
Infrastructure - HBAs Used In Testing
ATTO
ATTO - Support with Windows / Linux
Device Family | Bus Type | Windows Server 2012 x64 | Windows Server 2016 x64 | SUSE Linux Enterprise Server on x86-64 |
---|---|---|---|---|
FC 16Gb/s Gen 6 | PCIe | Datacenter | No | 12 |
FC 32Gb/s Gen 6 | PCIe | No | Datacenter | No |
ATTO - Family Membership
Device Family | Members |
---|---|
FC 16Gb/s Gen 6 | CTFC-161P, CTFC-162P, CTFC-164P |
FC 32Gb/s Gen 6 | CTFC-321E, CTFC-322E, CTFC-324E |
Broadcom Emulex
Broadcom Emulex - Support with Windows / Linux
Device Family | Bus Type | Windows Server 2012 x64 | Windows Server 2016 x64 | Windows Server 2019 x64 | Red Hat Enterprise Linux on x86-64 | SUSE Linux Enterprise Server on x86-64 |
---|---|---|---|---|---|---|
LP98xx / 98x series (Pegasus ASIC) | PCI, PCI-X | Datacenter | No | No | 7 | No |
LPe12xxx / 125x series (Saturn ASIC) | PCIe | Datacenter | No | No | No | 12 |
LPe16xxx / 15xxx series (Lancer ASIC) | PCIe | Datacenter | No | No | 7 | 12, 15 |
LPe31000 / LPe32000 series (Gen 6) | PCIe | Datacenter | Datacenter | Datacenter | No | No |
SN1000E | PCIe | No | No | No | 7 | No |
SN1100E2P | PCIe | Datacenter | No | No | 7 | 12 |
Broadcom Emulex - Family Membership
Device Family | Members |
---|---|
LP98xx / 98x series (Pegasus ASIC) | LP982, LP9802, LP9802DC, LP9802S |
LPe12xxx / 125x series (Saturn ASIC) | LPe1205-HP, LPe1250, LPe12000, LPe12000-E, LPe12002, LPe12002-E, LPe12002-M8, LPe12002-X8, LPe12004 |
LPe16xxx / 15xxx series (Lancer ASIC) | LPe15004, LPe16000-M6, LPe16000B, LPe16000B-M6, LPe16000B-M8, LPe16002-M6, LPe16002B, LPe16002B-M6, LPe16002B-M8, LPe16004, LPe16202 (FC) |
LPe31000 / LPe32000 series (Gen 6) | LPe31000-M6, LPe31002-M6, LPe31004-M6, LPe31004-M6-SIO, LPe32000-M2, LPe32002-M2, LPe32004-M2-SIO |
Brocade
Brocade - Support with Windows / Linux
Device Family | Bus Type | Windows Server 2012 x64 | Red Hat Enterprise Linux on x86-64 | SUSE Linux Enterprise Server on x86-64 |
---|---|---|---|---|
425 | PCIe | Datacenter | No | No |
825 | PCIe | Datacenter | 7 | No |
1860 (FC) | PCIe | No | 7 | 12 |
Hewlett Packard Enterprise
Hewlett Packard Enterprise - Support with Windows / Linux
Device Family | Bus Type | Windows Server 2012 x64 | Windows Server 2016 x64 | Red Hat Enterprise Linux on x86-64 | SUSE Linux Enterprise Server on x86-64 |
---|---|---|---|---|---|
AH403A | PCIe | No | No | No | 12 |
AJ763A | PCIe | Datacenter | Datacenter | No | No |
SN1000E | PCIe | Datacenter | Datacenter | 7 | No |
SN1000Q / SN1100Q series | PCIe | No | No | 7, 8 | 12 |
SN1600E | PCIe | No | No | No | 15 |
Hewlett Packard Enterprise - Family Membership
Device Family | Members |
---|---|
SN1000Q / SN1100Q series | SN1000Q, SN1100Q |
Marvell QLogic
Marvell QLogic - Support with Windows / Linux
Device Family | Bus Type | Windows Server 2012 x64 | Windows Server 2016 x64 | Windows Server 2019 x64 | Red Hat Enterprise Linux on x86-64 | SUSE Linux Enterprise Server on x86-64 |
---|---|---|---|---|---|---|
QLE2400 series | PCIe | Datacenter | No | No | No | No |
QLE2500 series | PCIe | Datacenter | Datacenter | No | 7 | No |
QLE2600 series | PCIe | Datacenter | No | Datacenter | 7 | 12 |
QLE2670 series | PCIe | Datacenter | Datacenter | No | 7 | No |
QLE2700 series | PCIe | No | No | No | No | 12 |
SANblade 23xx series | PCI, PCI-X, SBUS, cPCI | No | No | Datacenter | No | No |
SANblade 24xx series | PCI-X, PCIe | Datacenter | No | No | 7 | No |
Marvell QLogic - Family Membership
Device Family | Members |
---|---|
QLE2400 series | QLE2440, QLE2460, QLE2462, QLE2464, QME2462, QMI2572 |
QLE2500 series | QLE2560, QLE2562, QLE2562-S, QLE2564, QME2572, QMH2562, QMH2572, QMI2582, QMI3572 |
QLE2600 series | QLE2660, QLE2662 |
QLE2670 series | QLE2670, QLE2672 |
QLE2700 series | QLE2740, QLE2742, QLE2764 |
SANblade 23xx series | QCP2332, QCP2340, QLA2300, QLA2302, QLA2310, QLA2332, QLA2340, QLA2340C, QLA2342, QLA2344, QSB2340, QSB2342 |
SANblade 24xx series | QLA2440, QLA2460, QLA2462 |
Bridges/Routers
This list of SAN components represents equipment that has been used during NetBackup qualification testing of devices listed in previous sections of this document. It is not intended to be a list of supported components.
Infrastructure - Considerations
Subject | Notes |
---|---|
Vendor support considerations |
1. To ensure compatibility, the device manufacturers and the operating system vendor must support the combination of SAN components.
2. Consult the hardware vendor's web site for current firmware. |
Infrastructure - Routers/Bridges Used In Testing
Bridges/Routers
Manufacturer | Device |
---|---|
ADIC | SNC 4000 (embedded), SNC 5100, SNC 6101, SNC 6404 |
ATTO | FiberBridge 1290, FibreBridge 2400 |
Chaparral | FS1310, VFS113 |
Compaq | Modular Data Router |
Crossroads | 4250, 6000, 8000, 10000 |
Dell EMC | PV-136T (FCR embedded) |
Hewlett Packard Enterprise | 400 Multi-Protocol Router, e1200-160 FC Interface Controller, e2400-160 FC Interface Controller, e2400-FC 2Gb Interface Controller, e2400-FC 4Gb Interface Controller, N1200 4Gb |
Qualstar | VFS212 embedded router |
Quantum | FC310, FC470, FC1202 |
Spectra Logic | F-QIP |
Switches
This list of SAN components represents equipment that has been used during NetBackup qualification testing of devices listed in previous sections of this document. It is not intended to be a list of supported components.
Infrastructure - Considerations
Subject | Notes |
---|---|
Vendor support considerations |
1. To ensure compatibility, the device manufacturers and the operating system vendor must support the combination of SAN components.
2. Consult the hardware vendor's web site for current firmware. |
Infrastructure - Switches Used In Testing
Switches
Manufacturer | Device |
---|---|
ADIC | SNC 7404 |
Brocade | 4Gb SAN Switch for HP c-Class BladeSystem, 300, 5000, 5100, 7500 Extension Switch, SilkWorm 200E, SilkWorm 220E, SilkWorm 240E, SilkWorm 2400, SilkWorm 2800, SilkWorm 3200, SilkWorm 3250, SilkWorm 3850, SilkWorm 3900, SilkWorm 4100, SilkWorm 4150, SilkWorm 5100, SilkWorm 48000 |
Cisco Systems | MDS9216, MDS9506, Nexus 5010, Nexus 5020 |
Dell EMC | DS-16B2 |
Hewlett Packard Enterprise | 2408 FCoE CN Switch, SAN Switch 2/16, SAN Switch 4/16, SAN Switch 4/32, SAN Switch 8/40, SAN Switch 8/80, SAN Switch SN6000B 16GB 48/48 |
IBM | TotalStorage Storage Switch L10 |
Marvell QLogic | SANbox2-8, SANbox2-16, SANbox 1400, SANbox 3600, SANbox 5200, SANbox 5600, SANbox 5602, SANbox 5802, SANbox 9000, SANbox 9200 |
McDATA | Intrepid 6140, Sphereon 3232, Sphereon 4500 |
Sun | SG-XSW64-BASE |
Retiring Soon
The devices in this section will not be listed in the Hardware Compatibility List for the next major NetBackup release after NetBackup 10.0. Many of these devices are end-of-life products that are no longer supported by the manufacturer.
Virtual Tape Libraries
Manufacturer | Device |
---|---|
Quantum | DXi6700 Series, DXi8500 Series |
Tape Libraries
Manufacturer | Device |
---|---|
Quantum | Scalar i40, Scalar i40/i80 series, Scalar i80 |
ExaGrid
ExaGrid - Support with NetBackup Appliance
Storage Server Family | Plug-in | Data Interface | IPv6 | Supported OpenStorage Functionality | 5200 Series | 5300 Series |
---|---|---|---|---|---|---|
EX series | 10.0 | Ethernet | No | A.I.R., Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth | Yes | Yes |
EX series | V11.4.0 | Ethernet | No | A.I.R., Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth | Yes | Yes |
ExaGrid - Support with Windows / Linux
Storage Server Family | Plug-in | Data Interface | IPv6 | Supported OpenStorage Functionality | Windows Server 2012 x64 | Windows Server 2016 x64 | Red Hat Enterprise Linux on x86-64 |
---|---|---|---|---|---|---|---|
EX series | 10.0 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth | Datacenter | Datacenter | 7 |
EX series | V11.4.0 | Ethernet | No | A.I.R., Accelerator, Accel_Hyper-V, Accel_NDMP, Accel_VMware, Granular_Recovery, GRT_VMware, IR_VMware, Opt_Dup, Opt_Synth | Datacenter | Datacenter | 7 |